Commit 0c6987df in June 2008 disabled XAA offscreen pixmaps per default,
as they were broken, leaving XAA only able to accelerate operations
directly on the screen pixmap and nowhere else, eliminating acceleration
for basically every modern toolkit, and any composited environment.
So, it hasn't worked for over four years. No-one's even come close to
fixing it.
RIP.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Instead of keeping a tiny amount of code in an external module, just man
up and build it into the core server.
v2: Fix test/Makefile.am to only link libdri2.la if DRI2 is set
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than building the tiny amount of code required for XFree86-DRI as
an external module, build it in if it's enabled at configure time.
v2: Fix test/Makefile.am to only link libdri.la if DRI is set
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
fixup for DRI1 move
Signed-off-by: Keith Packard <keithp@keithp.com>
libxorgxkb.a contains a number of libraries which are used by XKB action
code to call back into the DDX, e.g. for VT switching, termination, grab
breaking, et al. Make sure libxkb.a comes first in the link order, so
it can mark XkbDDX* as used in order for the linker to not discard them.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The Solaris linker recently added a -z parent flag for easier checking
of symbol definitions in plugins against the program that loads them.
If that's present, this enables it, along with -z defs to error on
undefined symbols to alert us if any modules call symbols that won't
be found at runtime.
This builds upon, and requires, the recent Cygwin work to build Xorg.
It moves a couple more modules to be after the Xorg binary in the build
order so that they can find the binary to check against, much as the
Cygwin changes did (these would be modules built on Solaris but not
Cygwin).
v2: This version only sets the flags for the xorg-server build itself,
and does not yet export them in xorg-server.pc to the drivers, since
most of the drivers are not ready to build with -no-undefined yet.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
As a PE platform, all symbols in both EXEs and DLLs must be resolved
at link time. As Xorg modules depend on symbols in the Xorg
executable, we must build Xorg before its modules, creating an implib
from the former which is used to link the latter. This implib must
then be installed in order to build the drivers.
Currently only two drivers are supported on Cygwin: xf86-video-dummy
(to replace Xvfb/Xfake) and xf86-video-nested (to replace Xnest/Xephyr).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Always install XAA SDK headers so drivers still build even with
--disable-xaa
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use $(SHELL) to run it. Someone may want to build out of a source tree
in a filesystem with the noexec mount flag set.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
libxorg.la served to collect all the Xorg convenience libraries into one
massive archive to link into Xorg. This made things easy for symbol
resolution, but it tremendously slowed down the build since each change
caused libxorg.la to be rebuilt. This is an extremely slow process of
extracting all the objects from the sub-libraries and recombining them.
Instead, the archives are linked directly into Xorg. The order of the
libraries had to be tweaked a bit to make symbols resolve correctly with
the lower level code moving later in the link command.
As a side effect, since the dtrace objects are now being linked
directly into Xorg, we don't need the SPECIAL_DTRACE_OBJECTS hack to
add them twice.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
The symbols in sdksyms.c cover the entire source tree. In order to make
them resolve when libxorg.la goes away, move the objects from libloader
to Xorg. Unfortunately, this means sdksyms needs to get built again for
the test code.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
When an empty _SOURCES variable is declared, automake will recognize that
only linking is needed.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Solaris make won't substitute $< in explicit rules, only implicit ones
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only one (marginal) driver was using it, and it's been fixed to just
implement it directly.
v2: Also fix sdksyms.sh (spotted by Jesse Adkins)
v3: Also fix DESIGN.xml (spotted bu Julien Cristau)
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Add $(AM_V_at) to all relink make targets to silence them when automake
silent rules are in use.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Replaces special handling for Xquartz DDX and scales better to handling
the multiple platforms that now have some level of Dtrace support available.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
We were generating a shared library, but this lib is foobar, the parser
requires some symbols from the X server or from the program its being linked
into. If the program its being linked into (say a python .so) has symbol
visibility enabled then it will fail to dynamic link, also if this .so has
symbol visiblity enabled it will fail to dynamic link.
Screw it go back to a .a file really unless someone cleans it up properly.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Not all chipsets need to rely on the int10 scheme to do its daily work.
Well, the ideal would be to remove all int10 module from the server. I'll try
to provide some patches "soon" for this. Something like:
http://cgit.freedesktop.org/~vignatti/libx86/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Not all drivers need this kind of access as well.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Not all drivers need this kind of access.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Otherwise, for example, when hacking config/*.c, it is required to
run make clean on that directory, to ensure the proper libconfig.a
will be linked in the generated Xorg binary.
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
One of these I introduced by listing dix and mi in the same library list to
simplify other servers. The other had been hacked around using libosandcommon,
which is now gone.
This cleans up server Makefile.ams a little bit, but also means that people
messing with configure.ac need to be careful with whether they put libraries
in the _LIBS or _SYS_LIBS targets. Hopefully the comment in configure.ac will
clarify the issues.
