This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This replaces the CRTC-based Xinerama implementation with one which
uses Monitors instead, allowing clients to manipulate the Xinerama
configuration through the RandR Monitor list.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Prevent RRXinerama from activating if PseudoramiX is, so we don't get XINERAMA
listed twice in the list of extensions. I think this is otherwise benign, as
the PseudoramiX XINERAMA gets registered first and thus handles all requests.
Perhaps AddExtension() ought to warn us if the extension name is already
registered?
This appears to be a long-standing bug seen in XQuartz, and now in XWin as well.
Future work: Perhaps since RRXinerama isn't actually doing anything useful but
faking it when we have one screen, it seems that the PseudoramiX code could be
also used in that case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
If the user wants to set one of the slave devices as
the primary output, we shouldn't fail to do so,
we were returning BadMatch which was tripping up
gnome-settings-daemon and bad things ensues.
Fix all the places we use primaryOutput to work
out primaryCrtc and take it into a/c when slave
gpus are in use.
v2: review from Aaron, fix indent, unhide has_primary from
macro. I left the int vs Bool alone to be consistent with
code below, a future patch could fix both.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes the xinerama geometry when output slaves are enabled.
Tested with xdpyinfo -ext XINERAMA before after slave added.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
When passing variable pointers to functions or otherwise doing long
sequences to compute values for replies, create & use some new
temporary variables, to allow for simpler initialization of reply
structures in the following patches.
Move memsets & other initializations to group with the rest of the
filling in of the reply structure, now that they're not needed so
early in the code path.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The new path should only re-query on the other requests when we haven't
gathered the information from the DDX yet (such as with a non-RandR 1.2 DDX).
Bug #19037.
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
Clients expect any Xinerama-enabled screen to report at least one
monitor, but with RandR, there may not be any enabled crtcs. In this case,
tell the client that Xinerama is not active.
RRGetInfo can be expensive. Don't invoke it when quering Xinerama
information or setting a new CRTC configuration.
(cherry picked from commit b5aa9eb8e6)
Provide a Xinerama implementation when DIX version isn't enabled. This
version exposes each crtc as a separate 'screen' and reports the size of
that patch. The extension also sends ConfigureNotify events to the root
window whenever crtcs change so that applications will re-fetch xinerama
information. This actually works for metacity.