With Wayland compositors now being able to start Xwayland on demand, the
next logical step is to be able to stop Xwayland when there is no more
need for it.
The Xserver itself is capable of terminating itself once all X11 clients
are gone, yet in a typical full session, there are a number of X11
clients running continuously (e.g. the Xsettings daemon, IBus, etc.).
Those always-running clients will prevent the Xserver from terminating,
because the actual number of X11 clients will never drop to 0. Worse,
the X11 window manager of a Wayland compositor also counts as an X11
client, hence also preventing Xwayland from stopping.
Some compositors such as mutter use the XRes extension to query the X11
clients connected, match their PID with the actual executable name and
compare those with a list of executables that can be ignored when
deciding to kill the Xserver.
But that's not just clumsy, it is also racy, because a new X11 client
might initiate a connection the X11 server right when the compositor is
about to kill it.
To solve this issue directly at the Xserver level, this add new entries
to the XFixes extension to let the X11 clients themselves specify the
disconnect mode they expect.
Typically, those X11 daemon clients would specify the disconnect mode
XFixesClientDisconnectFlagTerminate to let the Xserver know that they
should not be accounted for when checking the remaining clients prior
to terminate.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of getting the current msc value from the window crtc,
which not exist take the last saved msc value saved in
the window_priv struct
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
This bumps the minimum Wayland version to 1.5 (released in 2014).
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
With autoconf, hashtable support is built along with Xres support.
Yet, glvnd also use it, so when disabling Xres from configure, the
build will fail at link time because hashtable functions are not
available.
Untie the build of hashtable from Xres support, just like meson build
does.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1091
Xwayland is usually spawned by the Wayland compositor which sets the
command line options.
If a command line option is not supported, Xwayland will fail to start.
That somehow makes the Xwayland command line option sort of ABI, the
Wayland compositor need to know if a particular option is supported by
Xwayland at build time.
Also, currently, Xwayland is being installed along with the rest of the
common executable programs that users may run, which is sub-optimal
because, well, Xwayland is not a common executable program, it's meant
to be a proxy between the Wayland compositor and the legacy X11 clients
which wouldn't be able to run on Wayland otherwise.
Xwayland would be better installed in `libexec` but that directory is
(purposedly) not in the user `PATH` and therefore the Wayland compositor
may not be able to find Xwayland in that case.
To solve both problems (which options are supported by Xwayland and
where to look for it), add a `pkg-config` file specifically for Xwayland
which gives the full path to Xwayland (`xwayland`) and which options it
supports (using `pkg-config` variables).
The `pkg-config` file also provides the `Version` so the build scripts
can check for a particular version if necessary.
Obviously, Wayland compositors are not required to use the `pkg-config`
file and can continue to use whatever mechanism they deem preferable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
None of the current BSD is actually using this code.
(checked DragonFly 5.8.1, FreeBSD 11.2, NetBSD 9.0 and OpenBSD 6.7)
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
All helper client code now uses xcb, so calling XSetAuthorization() is
no longer needed.
This is the last reference to libX11 from helper clients, so linking
with x11-xcb and libX11 is no longer required.
Also drop (unneeded?) linking with libXau.
Also drop installing these prerequistes on AppvVeyor.
Also move prototypes for functions in winauth.c from win.h into a new
header, winauth.h, and include that where needed.
Convert clipboard integration code from libX11 to xcb
This drops support for COMPOUND_TEXT. Presumably some ancient
(pre-2000) clients exist which support that, but not UTF8_STRING, but we
don't have an example to test with. (Given the nature of the thing, the
users of those clients probably work in CJK languages)
Supporting COMPOUND_TEXT would also involve writing (or extracting from
Xlib) support for the ISO 2022 encoding.
v2:
Fix the length of text property set by a SelectionRequest
The length of the text property is not neccessarily the same as the
length of the clipboard text before it is d2u converted (specifically,
if that contains any '\r\n' sequences, it will be shorter as they are
now just '\n')
Commit 195c2ef8f9 added this to the Meson
build but neglected to add it to autotools.
v2: Also update dix-config.h.in
Fixes: 195c2ef8f ("glamor: Add a function to get the driver name via EGL_MESA_query_driver")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> [v1]
Reviewed-by: Eric Engestrom <eric@engestrom.ch> [v1]
Reviewed-by: Matt Turner <mattst88@gmail.com>
isastream() was never more than a stub in glibc, and was removed in
glibc-2.30 by commit a0a0dc83173c ("Remove obsolete, never-implemented
XSI STREAMS declarations").
Bug: https://bugs.gentoo.org/700838
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
This fixes modesetting driver build failure which can be triggered with
the following configure options:
$ ./configure --disable-dri --disable-dri2 --disable-dri3
--disable-config-udev --enable-xorg
Bugzilla: https://bugs.gentoo.org/689768
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
When using mesa with libglvnd support, mesa will no longer install the
gl, glx, egl pkg-config files but instead let libglvnd provide them.
libglvnd maintainers decided to change the versioning as it was
mesa-specific previously. Now the libraries have versions of the API
they expose[1].
This causes problems when building the X server:
checking for glproto >= 1.4.17 gl >= 9.2.0... no
configure: error: Package requirements (glproto >= 1.4.17 gl >= 9.2.0) were not met:
Requested 'gl >= 9.2.0' but version of gl is 1.2
Lower the version requirement to 1.2 to allow building against libglvnd
provided libraries
[1] 0dfaea2bcb
There's not really a good reason to keep these separate, the vbe code
requires int10 and is not very large. This change eliminates the
build-time options for vbe; if you build int10, you get vbe.
Gitlab: https://gitlab.freedesktop.org/xorg/xserver/issues/692
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This adds support for xdg-output-unstable-v1 version 3, added in [1].
This new version deprecates zxdg_output_v1.done and replaces it with
wl_output.done. If the version is high enough, there's no need to wait for both
an xdg_output.done event and a wl_output.done event -- we only care about
wl_output.done.
[1]: 962dd53537
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When building Xwayland without neither DRI nor GLamor support enabled
with the autotools build system, the resulting binary would still link
against libdrm and epoxy even though those are not used/needed.
Make sure we require and link against libdrm and epoxy only if needed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The PresentOptionSuboptimal support code is not optional (once you've
enabled building Present at all), so require a protocol package version
that defines what we need.
Fixes: xorg/xserver#821
Rather than drawing the window contents from the shadow framebuffer, use
Composite extension redirection to cause the server to maintain a bitmap
image of each top-level X window, and draw the window contents from
that, so that window contents which are occluded in the framebuffer show
correctly in the task bar and task switcher previews.
v2:
Fix incorrect use of memset() found by gcc5
hw/xwin/winshadgdi.c: In function ‘winBltExposedWindowRegionShadowGDI’:
hw/xwin/winshadgdi.c:861:9: warning: ‘memset’ used with constant zero length parameter; this could be due to transposed parameters [-Wmemset-transposed-args]
v3:
Turn on -compositewm by default
v4:
Ignore -swcursor if -compositewm
-swcursor is not compatible with -compositewm (because the window
contents are drawn from an off-screen pixmap, not from the screen
pixmap, where the software cursor will be drawn).
v5:
Update meson.build also
Add -compositewm option to help output
Update CI to install prerequisites
MinGW defines SIG_BLOCK, but doesn't have signal masks, so rather than
checking for SIG_BLOCK, add a configure check for sigprocmask.
v2:
Also add check to meson.build
I don't think an input thread can ever be useful on Windows.
There is a pthread emulation, so having the thread itself isn't much of
a problem.
However, there is no device to wait on for Windows events, and even if
we were to replace select() with WFMO, Windows wants to send events for
a window to the thread which created that window.
So, disable input thread by default for MinGW
v2:
Also add similar to meson.build
Promote the generated file containing the date & time build was
configured to top-level.
Rename it from xf86Build.h to buildDateTIme.h.
Use it as well in XQuartz, stringize BUILD_DATE when needed.
This has always been described as 'experimental'
We don't think this has any users: This mode has been disabled in Cygwin
packages since March 2016. We've never provided the xwinwm WM for x86_64
Cygwin. No one has even asked where the option has gone.
This leaves XQuartz as the only user of the rootless extension.
Remove --enable-windowswm configure option
Remove multiwindowextwm stuff from Makefiles
Remove -mwextwm option
Remove -mwextwm from man-page and help
Un-ifdef XWIN_MULTIWINDOWEXTWM
v2:
Remove rootless include paths
Remove windowswmproto from meson.build
It doesn't require shared memory dir and thus allows
to avoid cases when this dir is detected incorrectly,
as in https://bugreports.qt.io/browse/QTBUG-71440
Signed-off-by: Alexander Volkov <a.volkov@rusbitech.ru>
Prodding the builder's filesystem for tmp dirs doesn't necessarily
tell you anything about what the actual host's filesystem is going to
look like, so we should just try the dirs at runtime.
Signed-off-by: Eric Anholt <eric@anholt.net>
I don't think this is useful information to have in the log, and it's
a bunch of autotools and meson logic to produce it.
Signed-off-by: Eric Anholt <eric@anholt.net>
We already have pm_noop.c being built most of the time for the
no-OS-PM case, so just switch to always using it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
CONFIG_UDEV and CONFIG_UDEV_KMS are the actual defines that are used
in the C code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This isn't used for anything, which is just as well, because
/etc/xorg.conf is not in fact a path xserver will try to use.
Bugzilla: https://bugs.freedesktop.org/8890
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
In commit 9db2af6f75 (xfree86: Remove xf86{Map,Unmap}VidMem) we
somehow stopped exporting xf86{Read,Write}Mmio{8,16,32}. Since the
function pointer indirection was intended to support dense vs sparse and
sparse support is now gone, we can just make the functions static inline
in compiler.h and avoid all of this.
Bugzilla: https://bugs.gentoo.org/548906
Tested-by: Christopher May-Townsend <chris@maytownsend.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
This adds initial support for displaying Xwayland applications through
the use of EGLStreams and nvidia's custom wayland protocol by adding
another egl_backend driver. This also adds some additional egl_backend
hooks that are required to make things work properly.
EGLStreams work a lot differently then the traditional way of handling
buffers with wayland. Unfortunately, there are also a LOT of various
pitfalls baked into it's design that need to be explained.
This has a very large and unfortunate implication: direct rendering is,
for the time being at least, impossible to do through EGLStreams. The
main reason being that the EGLStream spec mandates that we lose the
entire color buffer contents with each eglSwapBuffers(), which goes
against X's requirement of not losing data with pixmaps. no way to use
an allocated EGLSurface as the storage for glamor rendering like we do
with GBM, we have to rely on blitting each pixmap to it's respective
EGLSurface producer each frame. In order to pull this off, we add two
different additional egl_backend hooks that GBM opts out of
implementing:
- egl_backend.allow_commits for holding off displaying any EGLStream
backed pixmaps until the point where it's stream is completely
initialized and ready for use
- egl_backend.post_damage for blitting the content of the EGLStream
surface producer before Xwayland actually damages and commits the
wl_surface to the screen.
The other big pitfall here is that using nvidia's wayland-eglstreams
helper library is also not possible for the most part. All of it's API
for creating and destroying streams rely on being able to perform a
roundtrip in order to bring each stream to completion since the wayland
compositor must perform it's job of connecting a consumer to each
EGLstream. Because Xwayland has to potentially handle both responding to
the wayland compositor and it's own X clients, the situation of the
wayland compositor being one of our X clients must be considered. If we
perform a roundtrip with the Wayland compositor, it's possible that the
wayland compositor might currently be connected to us as an X client and
thus hang while both Xwayland and the wayland compositor await responses
from eachother. To avoid this, we work directly with the wayland
protocol and use wl_display_sync() events along with release() events to
set up and destroy EGLStreams asynchronously alongside handling X
clients.
Additionally, since setting up EGLStreams is not an atomic operation we
have to take into consideration the fact that an EGLStream can
potentially be created in response to a window resize, then immediately
deleted due to another pending window resize in the same X client's
pending reqests before Xwayland hits the part of it's event loop where
we read from the wayland compositor. To make this even more painful, we
also have to take into consideration that since EGLStreams are not
atomic that it's possible we could delete wayland resources for an
EGLStream before the compositor even finishes using them and thus run
into errors. So, we use quite a bit of tracking logic to keep EGLStream
objects alive until we know the compositor isn't using them (even if
this means the stream outlives the pixmap it backed).
While the default backend for glamor remains GBM, this patch exists for
users who have had to deal with the reprecussion of their GPU
manufacturers ignoring the advice of upstream and the standardization of
GBM across most major GPU manufacturers. It is not intended to be a
final solution to the GBM debate, but merely a baindaid so our users
don't have to suffer from the consequences of companies avoiding working
upstream. New drivers are strongly encouraged not to use this as a
backend, and use GBM like everyone else. We even spit this out as an
error from Xwayland when using the eglstream backend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just a small autogenerated header that will soon contain more then just
one macro.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace the current (incorrect) assumption that wayland-scanner is
located in the wayland-client prefix. Make use of the wayland_scanner
variable in wayland-scanner.pc
It was introduced back in 2013 and we already require newer wayland bits
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
[735/786] Generating 'hw/xwayland/Xwayland@exe/relative-pointer-unstable-v1-protocol.c'.
Using "code" is deprecated - use private-code or public-code.
See the help page for details.
Use private-code if wayland-scanner is new enough.
Signed-off-by: Adam Jackson <ajax@redhat.com>
... if available, falling back to the current heuristics otherwise. This
_finally_ gets me to being able to run util/modular/release.sh without
overriding $prefix.
Signed-off-by: Adam Jackson <ajax@redhat.com>