It doesn't require shared memory dir and thus allows
to avoid cases when this dir is detected incorrectly,
as in https://bugreports.qt.io/browse/QTBUG-71440
Signed-off-by: Alexander Volkov <a.volkov@rusbitech.ru>
Prodding the builder's filesystem for tmp dirs doesn't necessarily
tell you anything about what the actual host's filesystem is going to
look like, so we should just try the dirs at runtime.
Signed-off-by: Eric Anholt <eric@anholt.net>
I don't think this is useful information to have in the log, and it's
a bunch of autotools and meson logic to produce it.
Signed-off-by: Eric Anholt <eric@anholt.net>
We already have pm_noop.c being built most of the time for the
no-OS-PM case, so just switch to always using it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
CONFIG_UDEV and CONFIG_UDEV_KMS are the actual defines that are used
in the C code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This isn't used for anything, which is just as well, because
/etc/xorg.conf is not in fact a path xserver will try to use.
Bugzilla: https://bugs.freedesktop.org/8890
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
In commit 9db2af6f75 (xfree86: Remove xf86{Map,Unmap}VidMem) we
somehow stopped exporting xf86{Read,Write}Mmio{8,16,32}. Since the
function pointer indirection was intended to support dense vs sparse and
sparse support is now gone, we can just make the functions static inline
in compiler.h and avoid all of this.
Bugzilla: https://bugs.gentoo.org/548906
Tested-by: Christopher May-Townsend <chris@maytownsend.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
This adds initial support for displaying Xwayland applications through
the use of EGLStreams and nvidia's custom wayland protocol by adding
another egl_backend driver. This also adds some additional egl_backend
hooks that are required to make things work properly.
EGLStreams work a lot differently then the traditional way of handling
buffers with wayland. Unfortunately, there are also a LOT of various
pitfalls baked into it's design that need to be explained.
This has a very large and unfortunate implication: direct rendering is,
for the time being at least, impossible to do through EGLStreams. The
main reason being that the EGLStream spec mandates that we lose the
entire color buffer contents with each eglSwapBuffers(), which goes
against X's requirement of not losing data with pixmaps. no way to use
an allocated EGLSurface as the storage for glamor rendering like we do
with GBM, we have to rely on blitting each pixmap to it's respective
EGLSurface producer each frame. In order to pull this off, we add two
different additional egl_backend hooks that GBM opts out of
implementing:
- egl_backend.allow_commits for holding off displaying any EGLStream
backed pixmaps until the point where it's stream is completely
initialized and ready for use
- egl_backend.post_damage for blitting the content of the EGLStream
surface producer before Xwayland actually damages and commits the
wl_surface to the screen.
The other big pitfall here is that using nvidia's wayland-eglstreams
helper library is also not possible for the most part. All of it's API
for creating and destroying streams rely on being able to perform a
roundtrip in order to bring each stream to completion since the wayland
compositor must perform it's job of connecting a consumer to each
EGLstream. Because Xwayland has to potentially handle both responding to
the wayland compositor and it's own X clients, the situation of the
wayland compositor being one of our X clients must be considered. If we
perform a roundtrip with the Wayland compositor, it's possible that the
wayland compositor might currently be connected to us as an X client and
thus hang while both Xwayland and the wayland compositor await responses
from eachother. To avoid this, we work directly with the wayland
protocol and use wl_display_sync() events along with release() events to
set up and destroy EGLStreams asynchronously alongside handling X
clients.
Additionally, since setting up EGLStreams is not an atomic operation we
have to take into consideration the fact that an EGLStream can
potentially be created in response to a window resize, then immediately
deleted due to another pending window resize in the same X client's
pending reqests before Xwayland hits the part of it's event loop where
we read from the wayland compositor. To make this even more painful, we
also have to take into consideration that since EGLStreams are not
atomic that it's possible we could delete wayland resources for an
EGLStream before the compositor even finishes using them and thus run
into errors. So, we use quite a bit of tracking logic to keep EGLStream
objects alive until we know the compositor isn't using them (even if
this means the stream outlives the pixmap it backed).
While the default backend for glamor remains GBM, this patch exists for
users who have had to deal with the reprecussion of their GPU
manufacturers ignoring the advice of upstream and the standardization of
GBM across most major GPU manufacturers. It is not intended to be a
final solution to the GBM debate, but merely a baindaid so our users
don't have to suffer from the consequences of companies avoiding working
upstream. New drivers are strongly encouraged not to use this as a
backend, and use GBM like everyone else. We even spit this out as an
error from Xwayland when using the eglstream backend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just a small autogenerated header that will soon contain more then just
one macro.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace the current (incorrect) assumption that wayland-scanner is
located in the wayland-client prefix. Make use of the wayland_scanner
variable in wayland-scanner.pc
It was introduced back in 2013 and we already require newer wayland bits
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
[735/786] Generating 'hw/xwayland/Xwayland@exe/relative-pointer-unstable-v1-protocol.c'.
Using "code" is deprecated - use private-code or public-code.
See the help page for details.
Use private-code if wayland-scanner is new enough.
Signed-off-by: Adam Jackson <ajax@redhat.com>
... if available, falling back to the current heuristics otherwise. This
_finally_ gets me to being able to run util/modular/release.sh without
overriding $prefix.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Both autotools and meson build systems had complicated logic around
what version of libdrm to require for various options. Remove that and
just check for a new enough version to support all of the options
which need libdrm.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Save any value of the kernel non-desktop property in the xf86Output
structure to avoid non-desktop outputs in the default configuration.
[Also bump randrproto requirement to a version that defines
RR_PROPERTY_NON_DESKTOP - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
The big change here is MakeCurrent and context tag tracking. We now
delegate context tags entirely to the vnd layer, and simply store a
pointer to the context state as the tag data. If a context is deleted
while it's current, we allocate a fake ID for the context and move the
context state there, so the tag data still points to a real context. As
a result we can stop trying so hard to detach the client from contexts
at disconnect time and just let resource destruction handle it.
Since vnd handles all the MakeCurrent protocol now, our request handlers
for it can just be return BadImplementation. We also remove a bunch of
LEGAL_NEW_RESOURCE, because now by the time we're called vnd has already
allocated its tracking resource on that XID.
v2: Update to match v2 of the vnd import, and remove more redundant work
like request length checks.
v3: Add/remove the XID map from the vendor private thunk, not the
backend. (Kyle Brenneman)
v4: Fix deletion of ghost contexts (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
This makes the shared memory visible only for the Xephyr
and the X server to which it is connected.
Signed-off-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Keith Packard <keithp@keithp.com>
The xdg-output protocol aims at describing outputs in way which is
more in line with the concept of an output on desktop oriented systems.
For now it just features the position and logical size which describe
the output position and size in the global compositor space.
This is however much useful for Xwayland to advertise the output size
and position to X11 clients which need this to configure their surfaces
in the global compositor space as the compositor may apply a different
scale from what is advertised by the output scaling property (to achieve
fractional scaling, for example).
This was added in wayland-protocols 1.10.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Formerly used by the rgb database code, which hasn't been a thing in
over a decade.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When cross compiling, the value of MONOTONIC_CLOCK would be "cross
compiling", because AC_RUN_IFELSE doesn't work. However when enabling
wayland, a monotonic clock is required and configure aborts.
We change detection of CLOCK_MONOTONIC to degrade it gracefully from a
run check to a declaration check in case of cross compilation based on
the assumption that most systems will have a monotonic clock and those
that don't won't be able to run Xwayland anyway. The trade-off
essentially is either "always fail cross compilation" or "produce an
unusable Xwayland for unusual platform" and this commit switches to the
latter.
Signed-off-by: Helmut Grohne <helmut@subdivi.de>
Bug-Debian: https://bugs.debian.org/882531
Reviewed-by: Adam Jackson <ajax@redhat.com>
Whilst working on the Reproducible Builds effort [0], we noticed that
xorg-server could not be built reproducibly. One reason is because it
embeds a "current" build and date time.
This should be compatible with both GNU and BSD date(1).
[0] https://reproducible-builds.org/
v2: Fix change in Y-M-D format that broke the build.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The keyboard grabbing protocol for Xwayland is included in
wayland-protocol 1.9.
Update the wayland-protocol required version in both configure and meson
builds and add support for this new protocol in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>