Adam Jackson
43d9edd31e
Attempt to add the 'mouse' driver in more situations.
...
Always add a mouse driver instance configured to send core events, unless
a core pointer already exists using either the mouse or void drivers. This
handles the laptop case where the config file only specifies, say,
synaptics, which causes the touchpad to work but not the pointing stick.
We don't double-instantiate the mouse driver to avoid the mouse moving twice
as fast, and we skip this logic when the user asked for a void core pointer
since that probably means they want to run with no pointer at all.
2006-09-14 19:09:02 -04:00
Adam Jackson
739224d05e
Load the default module set when no Module section is given in the config.
...
Also, synchronize that list with the list for the pseudoconfig file used
when starting with no config file. These really need to be better unified.
2006-09-14 19:03:32 -04:00
Adam Jackson
beac2bf1e4
Expand the default sync ranges to be large enough for 800x600@60.
2006-09-14 19:01:13 -04:00
Adam Jackson
71a15a7d57
Publish the raw EDID block as a property on the root window.
...
This was removed in the patch for bug #5386 , but is still useful.
2006-09-14 19:00:10 -04:00
Adam Jackson
7939c8dfb7
Bump the default pixel depth to 24, and default bpp to 32.
2006-09-14 18:57:57 -04:00
Adam Jackson
72af975f9c
Fix up EDID blocks where the max pixclock exceeds the preferred mode clock.
...
Base EDID only lets you specify the maximum dotclock in tens of MHz, which
is too fuzzy for some monitors. 1600x1200@60 is just over 160MHz, but if
the monitor really can't handle any mode at 170MHz, then 160 is more
correct. Fix up the EDID block before the driver can see it in this case,
so we don't spuriously reject modes.
2006-09-14 18:56:34 -04:00
Adam Jackson
334f7db9f6
Allow hsync and vsync ranges to be overridden independently again.
2006-09-14 18:46:10 -04:00
Adam Jackson
ced46e1777
Record all standard timings from EDID as modes, instead of just the first five.
2006-09-14 18:41:59 -04:00
Adam Jackson
d89fee68d0
Record the maximum dot clock of the monitor, and filter by it.
2006-09-14 18:41:15 -04:00
Adam Jackson
fa8ef71668
Don't translate monitor gamma to X gamma.
...
The X gamma is used to set the output ramp of the card. Setting a 2.2 output
gamma going into a 2.2 monitor gives an effective gamma of 4.84, which is
very much not what you want.
2006-09-14 18:33:00 -04:00
Luc Verhaegen
511c60bc73
Bug #5386 : Synthesize modelines from EDID data.
2006-09-14 18:30:36 -04:00
Bill Nottingham
0a62840e2c
Bug 7641: fix comment written to Xorg.conf (s/VertSync/VertRefresh/)
...
X.Org Bugzilla #7641 <https://bugs.freedesktop.org/show_bug.cgi?id=7641 >
Patch #6349 <https://bugs.freedesktop.org/attachment.cgi?id=6349 >
2006-09-13 15:40:23 -07:00
Donnie Berkholz
2b357e9a2f
If we're installing libxf86config, install headers needed to build against it.
2006-09-10 22:17:20 -07:00
Jesse Barnes
b3a3020fd0
the new PCI mapping routines are broken on sparc64 (in fact they look
...
broken for any 32 bit X server running on a 64 bit kernel) so #ifdef
them out for now. the PCI rework tree will make all this crap go away,
so I think we can tolerate the extra #ifdef for the next release.
2006-09-10 11:13:18 -07:00
Michel Dänzer
8356be492c
Make sure _XSERVER64 is defined when it should be and gets tested.
2006-09-06 15:20:55 +02:00
Adam Jackson
ebbdc1342a
Remove calls to LoaderCheckUnresolved(), since it's now a stub.
2006-08-28 18:17:32 -04:00
Adam Jackson
b879356ce9
More #ifdef USE_DEPRECATED_KEYBOARD_DRIVER.
2006-08-24 15:50:15 -04:00
Matthias Hopf
4ed311cf1c
Merge branch 'master' of git://anongit.freedesktop.org/git/xorg/xserver
2006-08-24 20:17:10 +02:00
David Nusinow
733c4beb16
Add xorg.conf IgnoreABI option which does the same thing as -ignoreABI
2006-08-23 22:39:42 +00:00
Adam Jackson
ee5e2cbd2b
Un-cut-and-paste the mode rejection message.
2006-08-17 17:29:32 -04:00
Adam Jackson
43e42eef1f
Fix default mouse device on Linux, again.
...
It would be really nice if we only did this in one place instead of 40.
2006-08-17 16:22:07 -04:00
Matthias Hopf
73e58adda9
Fixed segfault w/ broken Xinerama configs.
2006-08-16 18:18:51 +02:00
Bastian Blank
f7919c2879
xfree86: don't do legacy IO on ARM or S/390 (Debian #362641 )
...
Don't attempt to poke legacy IO ranges on ARM or S/390.
2006-08-12 20:43:25 +03:00
Samuel Thibault
e641000b98
xfree86: add Hurd support ( #5613 )
...
Add support for GNU/Hurd.
2006-08-12 19:41:59 +03:00
Adam Jackson
c4951e0a6b
Fix a mode sanity check to not break reduced-blanking setups (LCDs).
2006-08-10 20:49:06 -04:00
Adam Jackson
e1921f014b
Rename some mode tokens to better reflect their use.
...
Per #5386 , M_T_EDID -> M_T_DRIVER, since it's really for any driver-detected
mode. Also add M_T_PREFERRED bit, to select a 'best' mode out of a set.
2006-08-10 20:43:15 -04:00
Adam Jackson
db82e12fac
Remove TargetRefresh option from the autoconfig logic.
...
The default target of 75Hz is almost always wrong for LCDs.
2006-08-09 14:55:17 -04:00
Daniel Stone
12dbd8a02f
remove optional R3 backwards compatibility
...
Remove the permitOldBugs flag, which enabled backwards compatbility with
broken R2/R3 era clients.
2006-08-07 23:43:40 +03:00
David Nusinow
f54b71b772
Document enable/disable flag for AIGLX in xorg.conf manpage.
2006-08-06 18:11:00 +00:00
Ian Romanick
3112a6c4f2
Noting uses libdummy.a, so don't build it. Only libdummy-nonserver.a
...
is actually used.
2006-07-31 10:25:31 -07:00
Daniel Stone
ecb7d43a76
add sym.h to sources
2006-07-30 11:52:41 +03:00
Daniel Stone
a68dc013a3
remove README (which doesn't exist) from EXTRA_DIST
2006-07-30 11:08:47 +03:00
Luc Verhaegen
79016d4036
Bug #5386 (partial): Move CVT mode generator from cvt(1) to server core, and
...
export it from the X server to modules.
2006-07-28 16:02:02 -04:00
Adam Jackson
2a4ceb09ed
Remove dead function prototypes.
2006-07-26 19:39:17 -04:00
Adam Jackson
990a400905
Remove getconfig horrorshow. Replace with a static built-in rule list for now.
2006-07-26 19:03:39 -04:00
Adam Jackson
39158e98ac
Remove another latent PowerMAX hunk.
...
All your favorite running jokes of 2005, today!
2006-07-26 18:39:28 -04:00
Adam Jackson
70869fc677
Yet more dead code.
2006-07-21 23:39:37 -04:00
Adam Jackson
7c1b2ee7a8
static markup, more dead code.
2006-07-21 23:35:13 -04:00
Adam Jackson
1c4f90b1d0
Open-coded path checks make baby Jesus cry.
2006-07-21 23:03:21 -04:00
Adam Jackson
114264584c
Remove a useless open() of the module we're about to load.
2006-07-21 22:55:41 -04:00
Daniel Stone
6cf844ab69
loader: walk directory paths with readdir(), don't stat() everything
...
Walk the directories with readdir, and don't stat everything we can
find. Thanks to davej for the public humiliation reminding me to go back
and re-fix this one.
2006-07-21 19:58:15 -04:00
Adam Jackson
63dfaa1d5b
Delete internal usage of the symbol ref/req lists.
2006-07-21 18:47:18 -04:00
Adam Jackson
bca9364f3f
Remove the loader's required and referenced symbol lists, dead code.
2006-07-21 18:41:46 -04:00
Adam Jackson
aff404f293
Detach xf4bpp from cfb.
2006-07-21 18:24:37 -04:00
Adam Jackson
0aaac95b0d
Remove RCS tags. Fix Xprint makefile braindamage.
2006-07-21 17:56:00 -04:00
Aaron Plattner
eeaad0e956
Fix the RandR failure path for rotated screens.
2006-07-21 15:20:40 -07:00
Ian Romanick
22db3fdb54
Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/xserver
2006-07-21 13:55:37 -07:00
Ian Romanick
2f98841fde
Remove unused variable.
2006-07-20 16:08:27 -07:00
Adam Jackson
985c34bf06
Remove the DDXTIME conditional, for being unused.
2006-07-20 17:33:13 -04:00
Ian Romanick
c69c00d652
Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/xserver
2006-07-20 12:08:38 -07:00