swap_target is an out-parameter that needs to be set to the value that
SBC will take on after this SwapBuffers request completes.
However, it was also being used as a temporary variable to hold the MSC
at which the SwapBuffers request got scheduled to occur. This confusion
makes it harder to reason about whether swap_target is being set
correctly for its out-parameter usage. (Hint: It isn't.)
For the latter use, it makes more sense to use the existing target_msc
variable, which already has the right value unless target_msc, divisor,
and remainder are all 0, in which case we can set it using swap_interval
as usual.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This gets the easy warnings, mostly constant string problems.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This reverts commit 3209b094a3. After a
long debug session by Paul Berry, it appears that this was the commit
that has been producing sporadic failures in piglit front buffer
rendering tests for the last several years.
GetBuffers may return fresh buffers with invalid contents at a couple
reasonable times:
- When first asked for a non-fake-front buffer.
- When the drawable size is changed, an Invalidate has been sent, and
obviously the app needs to redraw the whole buffer.
- After a glXSwapBuffers(), GL allows the backbuffer to be undefined,
and an Invalidate was sent to tell the GL that it should grab these
appropriate new buffers to avoid stalling.
But with the patch being reverted, GetBuffers would also return fresh
invalid buffers when the drawable serial number changed, which is
approximately "whenever, for any reason". The app is not expecting
invalid buffer contents "whenever", nor is it valid. Because the GL
usually only GetBuffers after an Invalidate is sent, and the new
buffer allocation only happened during a GetBuffers, most apps saw no
problems. But apps that do (fake-)frontbuffer rendering do frequently
ask the server for the front buffer (since we drop the fake front
allocation when we're not doing front buffer rendering), and if the
drawable serial got bumped midway through a draw, the server would
pointlessly ditch the front *and* backbuffer full of important
drawing, resulting in bad rendering.
The patch was originally to fix bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=28365
Specifically:
To reproduce, start with a large-ish display (i.e. 1680x1050 on my
laptop), use the patched glxgears from bug 28252 to add the
-override option. Then run glxgears -override -geometry 640x480
to create a 640x480 window in the top left corner, which will work
fine. Next, run xrandr -s 640x480 and watch the fireworks.
I've tested with an override-redirect glxgears, both with vblank sync
enabled and disabled, both with gnome-shell and no window manager at
all, before and after this patch. The only problem observed was that
before and after the revert, sometimes when alt-tabbing to kill my
gears after completing the test gnome-shell would get confused about
override-redirectness of the glxgears window (according to a log
message) and apparently not bother doing any further compositing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
After we share the pixmap, the backing storage may have changed,
and we need to invalidate and buffers pointing at it.
This fixes GL compositors and prime windows lacking contents initially.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are two minor changes, one to reset the pointer to NULL,
after freeing the pixmaps, one to make sure we use the right API for
the master pixmap, though I doubt it'll ever really matter.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
When the drawable disappears we need to free the prime master/slave combos.
This fixes a leak after a prime app is run.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Same as DRI2CreateDrawable, except it can return the DRI2 specific XID of the
DRI2 drawable reference to the base drawable.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of keeping a tiny amount of code in an external module, just man
up and build it into the core server.
v2: Fix test/Makefile.am to only link libdri2.la if DRI2 is set
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a static mask of prime id and allocate them at screen time,
if the driver supports the prime interfaces and is a gpu screen.
This is instead of them changing due to user controlled randr commands,
as suggested by Keith.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the initial prime support for dri2 offload. The main thing is
when we get a connection from a prime client, we stored the information
and mark all drawables from that client as prime. We then create all
buffers for that drawable on the prime device dri2screen.
Then DRI2UpdatePrime is provided which drivers can call to get a shared
pixmap which they can use as the front buffer. The driver is then
responsible for doing the back->front copy to the shared buffer.
prime requires a compositing manager be run, but it handles the case where
a window get un-redirected by allocating a new pixmap and pointing the crtc
at it while the client is in that state.
Currently prime can't handle pageflipping, so always does straight copy swap,
v1.1: renumber on top of master.
v1.2: fix auth on top of master.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The legacy logic was embarassingly wrong; AuthMagic should return errno,
so returning FALSE only when AuthMagic returns nonzero is exactly wrong.
v2: Match drmAuthMagic by returning -EINVAL rather than EINVAL
Fix trailing whitespace
https://bugs.freedesktop.org/show_bug.cgi?id=51400
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Knut Petersen <knut_petersen@t-online.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
xwayland drivers need access to their screen private data to authenticate.
Now that drivers no longer have direct access to the global screen arrays,
this needs to be passed in as function context.
v2: Don't break ABI
v3: Paint the bikeshed blue; drop fd from AuthMagic2ProcPtr prototype
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Bump dri2proto dependency to 2.7.
Bump DRI2INFOREC_VERSION to 7.
This new protocol request effectively allows clients to perform feature
detection on the DDX. The request was added in DRI2 protocol 1.4.
If I had DRI2GetParam in June 2011, when I was implementing support in the
Intel DDX and Mesa for new hardware that required a new DRI2 attachment
format, then I could have avoided a week of pain caused by the necessity
to write a horrid feature detection hack [1] in Mesa. In the future, when
the work begins to add MSAA support to the Intel DDX, having a clean way
to do feature detection will allow us to avoid revisiting and expanding
that hack.
[1] mesa, commit aea2236a, function intel_verify_dri2_has_hiz
v2: If driver doesn't define ds->GetParam, dont' crash. Fall back to
default behavior, per keithp.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net> (v1)
Reviewed-by: Ian Romanick <idr@freedesktop.org> (v1)
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Rename functions/macros from list_* to xorg_list_*
Rename struct from struct list to struct xorg_list.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In-sed-I-trust: Peter Hutterer <peter.hutterer@who-t.net>
While a redirected window is flipped, its pixmap may still be used as
and EGL image and should also get invalidated. When sending invalidate
events for a window, also send the events for its pixmap.
Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Without this, when a compositing manager unredirects a fullscreen window which
uses DRI2 and page flipping, the DRI2 buffer information for the compositing
manager's output window (typically the Composite Overlay Window or root window)
may become stale, resulting in all kinds of hilarity.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=35452 .
[Original patch by Michel Dänzer <michel@daenzer.net>]
[Tree walk optimized version by Keith Packard <keithp@keithp.com>]
Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Otherwise we might keep stale cached information, e.g. after the driver
performed page flipping.
This is part of the fix for
https://bugs.freedesktop.org/show_bug.cgi?id=35452 .
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the client is not behaving correctly and swaps buffers before
getting them, Valgrind will complain about uninitialized memory being
used in DRI2InvalidateDrawable.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
The Resource database is reset upon regeneration and so the dri2 module
needs to re-register its RESTYPE for the drawable or else it will
clobber the next unsuspecting user of the database. Fortunately, DRI2 is
loaded late in the initialisation sequence and was last up until
xf86-video-intel started using the Resource database to track
outstanding swaps...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
DDX can now implement validation for swap_limit changes to prevent
configurations that are not support in driver.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
CC: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This allows ddx to set swap_limit if there is more than one back
buffer for drawable. Setting swap_limit has to also check if change
affects a client that is blocked.
This can be used to implement N-buffering in driver with minimal
logic in allocation and selecting next back.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
ReuseBufferNotify hook is called whenever old buffer is reused in DRI2
code.
Driver can use this hook to rewrite the buffer name if hardware requires
shared buffers. Shared buffer might be some hardware limited resources like
framebuffer that is preallocated in boot.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
ConfigNotify is set by DRI2ScreenInit, but not restored to
previous state on close. Fix it.
(I'm preparing a patch for xf86-video-nouveau which detects GPU lockup
after dri2 init and it needs to reinitialize dri2)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Only send invalidate events for drawables if some client has requested
some buffers.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
update_dri2_drawable_buffers() doesn't modify out_count, so pass it
by value.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Don't access invalid memory if calloc() fails to allocate the buffers
array.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The calling for allocate_or_reuse_buffer may fail due to some reason, e.g. out of memory.
If the buffers[] were not initialized to be NULL, the following err_out may try to access an illegal memory, which will cause X crash afterward.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Justin Dou <Justin.Dou@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the drawable size doesn't match the pixmap size page flipping should
not be allowed.
If the window is larger than the pixmap, page flipping might need to
reposition the CRTC somewhere in the middle of the pixmap. I didn't
spot any code that would handle that at least in the intel driver.
Also the root pixmap could then move to some negative screen
coordinates. Not sure if all bits of code could handle that. Perhaps
when composite is enabled screen_x/y would make it work, but without
composite there's no way that it would work AFAICS.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
DDX driver may implement schedule swap without GetMSC. In that case we
can't call GetMSC in DRI2SwapBuffers.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
CC: Keith Packard <keithp@keithp.com>
CC: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
If a pixmap header is modified or the drawable serial changes, some
aspects of the drawable are likely to have changed so we should
re-allocate the corresponding DRI2 drawable in that case. This is one
way of catching when the root window pixmap changes through xrandr.
Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=28365.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Detect if a drawable has been moved from an original crtc to a new crtc
with a lower current vblank count than the original crtc inbetween
glXSwapBuffers() calls. Reinitialize drawable's last_swap_target
before scheduling next swap if such a move has taken place.
last_swap_target defines the baseline for scheduling the next swap.
If a movement between crtc's is not taken into account, the swap may
schedule for a vblank count on the new crtc far in the future, resulting
in a apparent "hang" of the drawable for a long time.
Fixes Bugzilla bug #28383.
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This prevents DRI2GetScreen from being invoked with an uninitialized
private key which would cause an assert failure.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: David Ronis <David.Ronis@McGill.CA>
This reverts commit fdb081b430
"dri2: Deal with input-only windows by using WindowDrawable()"
and replaces it as follows:
Reject the creation of a DRI2 drawable for UNDRAWABLE_WINDOW (input-only
windows) and DRAWABLE_BUFFER (whatever those are) drawables and only look up
privates for the supported drawable types.
The rest of the the code can continue pretending there's only output windows
and pixmaps, which are the only kinds of drawables relevant for DRI2.
Fixes server crash with GLX compositing managers such as compiz or kwin, due
to looking up a window private for a pixmap and getting a bogus pointer.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DRI2WaitSBC() didn't block if requested targetSBC wasn't yet reached.
Instead it returned a xreply with uninitialized junk return values, then
blocked the connection until targetSBC was reached.
Therefore the client didn't block, but continued with bogus return
values from glXWaitForSbcOML.
This patch fixes the problem by implementing DRI2WaitSBC similar
to the clean and proven DRI2WaitMSC implementation.
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Input only windows aren't DRAWABLE_WINDOW, but casting them to a
PixmapPtr is a bit harsh, and unlikely to get the appropriate privates
structure. use WindowDrawable instead which checks for both
input-output and input-only windows.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Eric Anholt <eric@anholt.net>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since reallocating the backing pixmap can fail, we need to try and do
it before any other side effects of reconfiguring the window happen.
This changes the ConfigNotify hook to return status, and moves the
composite window reconfiguration wrappers to ConfigNotify. They all
basically did the same thing, so we can drop the MoveWindow,
ResizeWindow, ChangeBorderWidth wrappers, and allow ConfigNotify to do
all the work. If reallocation fails we fail before we send any
confiureNotify events, or enter the area we can't recover from.
The only place we now enforce 32k limits are in EXA/UXA/fb, so drivers
that don't use this should probably deal with it in their pixmap
allocate if they don't already.
This also breaks ABI, so we need an alternate fix for older servers,
working on the X server makes me realise why I'm a kernel hacker.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Some drivers use DRI protocol but implement their own kernel rendering
manager. For these drivers, libdrm becomes useless. --disable-libdrm
configure parameter can be used to disable libdrm support in dri2.
To provide ABI/API compatibility for libdrm based drivers, libdrm call
is wrapped in ifdef.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
With this new hook, drmAuthMagic becomes useless and should be deprecated.
You might want to implement AuthMagic on driver side instead.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
1461b31e40 tests to see if the allocation
of buffer[i] failed after i has been incremented, causing it to look
at the wrong pointer.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If driver fails to allocate memory for dri2 buffer server would crash
in send_buffers_reply.
Solution is to handle the allocation failure and return BadAlloc to
client.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This lets the DRI2 clients rely on the server to notify them when they
need to get new buffers. Without this, OpenGL clients poll the server
in glViewport() which can be a performance problems and also isn't
completely correct behaviour.
We bump the DRI2 protocol minor to indicate the availability of the
event, which the DRI2 clients can use to avoid polling. This speeds up
various piglit and oglc test cases as well as real applications.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>