InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The XGetImage man page states:
If the drawable is a window, the window must be viewable, and it must be the
case that if there were no inferiors or overlapping windows, the specified
rectangle of the window would be fully visible on the screen and wholly
contained within the outside edges of the window, or a BadMatch error
results. Note that the borders of the window can be included and read with
this request.
However, the server was only checking the requested region against the screen
bounds, allowing XGetImage requests to read pixels outside the bounds of a
window's ancestors. Normally, this would just read other pixels from the
screen, but if one of the ancestor windows is redirected, the window's backing
pixmap may be smaller than the window itself.
This change checks the region against the window's bounding drawable, which is
either the screen pixmap, a redirected window's backing pixmap, or the root
window for servers that don't support GetWindowPixmap.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
EventToXI2 returns a NULL event for enter/focus events since these events
aren't yet wrapped into internal events. This is a quickfix only, it works
thanks to the alignment of internal and XI2 event types.
Eventually, enter/leave events should be wrapped into internal events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A client that grabs for button/key events may not have the
ButtonPress/KeyPress mask set and should not receive an event in that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There will be no new space allocated, if mode != PropModeReplace and
len == 0, or if mode is not one of the handled modes.
This fixes freeing data that is still in use, leading to double frees and
other memory corruption.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keysym grabs are tricky in the details, keycode grabs are known to work. So
for now, provide keycode grabs only.
Requires inputproto 1.9.99.15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This header file is not in the /dix dir, but in the /include dir.
The makefile aborted and the xserver distribution files were not created.
The fix is to remove this header file from the libdix_la_SOURCES
in the dix/Makefile.am.
X.Org Bug 27825 <http://bugs.freedesktop.org/show_bug.cgi?id=27825>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Event alloc_arg: Called allocation function "XIPropToInt" on "ptr" [details]
167 rc = XIPropToInt(val, &nelem, &ptr);
Event leaked_storage: Variable "ptr" goes out of scope
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
internal events keep valuator data at the index for the valuator, not like
the wire events that start with first_valuator.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The code that didn't list attached slave devices for XI1 clients doesn't
exist anymore, so there's no need for these presence events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously, an active grab on an attached slave device would send the device
floating for the duration of the grab. This breaks existing XI applications
(e.g. the GIMP) since they grab all devices automatically - resulting in the
loss of control over the VCP.
The behaviour of extended input devices during a grab in relation to the
core pointer is not specified in the XI protocol specification.
The removal of the temporary detachment restores the behaviour of extended
input devices as present in currently released servers - even if a device is
grabbed, an event from this device will result in an event from the core
pointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Master devices must have the standard button map applied for all buttons to
ensure buttons larger than 7 (the default for MDs) are mapped appropriately.
We can't copy the button map from SDs to MDs since that breaks the chained
button mapping. However, by ensuring all buttons (even non-existing ones)
are mapped, devices that send such buttons continue to work.
X.Org Bug 22594 <http://bugs.freedesktop.org/show_bug.cgi?id=22594>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xtst devices get this property assigned automatically so they can be
detected easily by a client.
The property is read-only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than storing a simple boolean in the devPrivate for XTest devices,
store the actual master device's id (since it is constant for the life of
the device anyway).
Callers should use GetXtstDevice now instead of digging around in the
devPrivates themselves.
This patch allows for a cleanup in the creation of new master devices since
GetMaster and GetXtstDevice spare the need for loops, IsPointer checks and
similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
The callers should need to use the dev privates key to look up xtest
devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
This makes the ptr accel api actually sensible from a driver
perspective, since it avoids superfluous device lookups.
Also, makes independent accel contexts possible.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allows security modules to enforce what property contents can be set by
clients. Uses the new DixPostAccess bit to distinguish between the
existing call made during the lookup (with the old property data) and
this new call. Note that this only applies to writes, prepends, or
appends to existing properties; for new properties the existing
DixCreateAccess hook call may be used since it includes the new data.
Refer to the XACE-Spec document in xorg-docs, section "Property Access."
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Presumably, some intelligent, XI2-aware management app will be calling
XISetClientPointer on behalf of other clients; this check makes sure
the target client has permission on the device.
Requires changing the prototype to return status code instead of Bool.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
LookupClientResourceComplex is used by DRI1 code to find and free a DRI
drawable in a callback, however when the DRI code returns this->value
is now pointing at freed memory. It seemed easiest to store the value
to a temporary and return it afterwards.
Another option might be a new FreeClientResourceComplex or one that
also returns the id, so we can free it using an alternative means.
found using valgrind.
amended along ajax's suggestions
Maps are CARD8s, therefore checking for values above 255 is completely
unnecessary. Moreover, 0 is a valid value for maps, so the check wasn't
even correct to begin with. This fixes bug #22392, which was uncovered
by commit 280b7f92d7.
Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Master devices provide the union of all attached slave devices' buttons,
i.e. the number of buttons on the master device is always the number of
buttons of the slave device with the highest number of buttons. When slaves
are attached or detached, the master device adjusts the button number to
reflect the new buttons.
On a slave switch, this slave's button labels are copied into the master (up
to slave->num_buttons). The remaining button labels (if any) stay as they
are. Thus, if any of the higher buttons is still pressed, it reflects the
label of the last pressed device that provided this button.
If two devices press the same button and it is differently labelled the last
pressed one will be reflected in the master device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
MD's will soon be the union of all devices anyway. XTest pointers are only
for the core protocol XTest stuff, so 7 buttons (lmr + 4 wheel buttons)
should do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some files (notably those merged with MPX before XI2 came along) didn't use
a 'xi' prefix. This patch changes all of them to meaningful names.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This stops inputstr.h being needed to be included by output drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
event->type is always GenericEvent for XI2 events. Instead, XI_ButtonPress
(the generic event's evtype must be stored.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
it's unclear whether there actually is a problem, but in a very similar
case there is (bug#21456). Also, integer addition is generally faster.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
