Copied TGL PCI ID from MESA iris_pci_ids.h
This update brings in a significant number of new platform ID's
Sync up until commit f02ae698
Signed-off-by: Mazlan, Hazwan Arif <hazwan.arif.mazlan@intel.com>
On FreeBSD 13.0-CURRENT for PowerPC64 big-endian (BE), X was
crashing in some cases. For instance, when twm was started
and the background was clicked to open its menu, X crashed
with a segmentation fault, trying to dereference a null pointer
at CreatePicture().
There were 2 issues with xorg-server handling of RGB masks that
caused the pointer above to be null and thus the crash:
- wrong use of ffs() to get the RGB offsets from the masks
- overflow when shifting a 16-bit integer
This change fixes both issues. They happen when the system is BE
but has a video adapter using a little-endian (LE) ARGB32
framebuffer. In order to display the correct colors, this setup
requires a BE RGBA32 color format to be used by X, by setting
the RGB masks appropriately, that didn't work properly because of
the issues above.
A lot of that code is the same as in xf86-amdgpu and xf86-nouveau drivers. By removing that functions from
ms namespace we can move that code to common implementation.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
According to the "VESA Enhanced EDID Standard", all GTF compliant
displays are continuous frequency.
The GTF support flags in 'Display Range Limits Descriptor' cannot be
used if the display is a non-continuous frequency multi-mode display.
Closes#1105
Signed-off-by: Pascal VITOUX <vitoux.pascal@gmail.com>
Fixes: 6a79a737 ("xfree86: add drm modes on non-GTF panels")
Reviewed-by: Aaron Ma aaron.ma@canonical.com
Rather than trying to create a gamma ramp array of the appropriate size in
drmmode_crtc_init when the GAMMA_LUT property should be used, just flag the crtc
as wanting to use the GAMMA_LUT property and then replace the gamma ramp later,
right before calling xf86HandleColormaps. This avoids a problem during initial
startup where xf86RandR12CreateObjects12 hard-codes a gamma ramp size of 256,
causing xf86RandR12CrtcSetGamma to read past the end of the DIX layer's RandR
gamma ramp array:
PreInit
drmmode_pre_init
drmmode_crtc_init
crtc->gamma_size = 1024
ScreenInit
xf86CrtcScreenInit
xf86RandR12Init
xf86RandR12Init12
xf86RandR12CreateObjects12
RRCrtcCreate
randr_crtc->gammaSize = 0
xf86RandR12InitGamma(pScrn, 256)
RRCrtcGammaSetSize
randr_crtc->gammaSize = 256
xf86RandR12InitGamma
xf86RandR12CrtcInitGamma
RRCrtcGammaSet
xf86RandR12CrtcSetGamma
// crtc->gamma_size is 1024 here, while randr_crtc->gammaRed
// is a 256-element array.
memcpy(crtc->gamma_red, randr_crtc->gammaRed, crtc->gamma_size * sizeof(crtc->gamma_red[0]));
drmmode_setup_colormap
xf86HandleColormaps
xf86RandR12InitGamma
RRCrtcGammaSetSize
randr_crtc->gammaSize = 1024
Fixes: 245b9db0 - modesetting: Use GAMMA_LUT when available
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1126
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
This brings the behavior closer than what we currently have with
autotools-based build system.
Meson does not currently have native support for symlinks.
See https://github.com/mesonbuild/meson/issues/1602.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Meson gets confused when there are two targets of the same name within
the same directory, so we use a different intermediate name.
This is a problem with the Xorg SUID wrapper which has the same filename
as the real Xorg executable and is configured in the same meson.build
file. This commit works around this by using a different filename in
build stage and renaming only when installing.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
The code path added by commit 69e4b8e6 (xfree86: attempt to autoconfig
gpu slave devices (v3)) assumes that it will only be run if the primary
device on the screen is the first device in xf86configptr->conf_device_lst.
While this is true most of the time, there are two specific cases where
this assumption fails.
First, if the first device in conf_device_lst is assigned to a different
seat than the running X server, it will be skipped by the previous
FIND_SUITABLE macro usage. Second, if the primary device was explicitly
assigned to the screen but auto_gpu_device is still set and no secondary
devices were explicitly listed, that device may not be the first device
in conf_device_lst.
When the first device in conf_device_lst is not the primary device
assigned to the screen, two problems emerge. First, the first device in
conf_device_lst will never be assigned to the screen as a secondary
device. Second, the primary device is additionally assigned to the
screen as a secondary device. The combination of these problems causes
certain otherwise valid configurations to be invalid. For example, if a
primary device is assigned to a screen and a secondary device is listed
in the config but not explicitly assigned to the screen, then one order
of the device sections results in a usable PRIME or Reverse PRIME setup
and the other order does not.
This commit removes the assumption that the primary device is the first
device in conf_device_lst by starting the loop from the start of
conf_device_lst and skipping the primary device when it is encountered.
Signed-off-by: Jacob Cherry <jcherry@nvidia.com>
This add a new flag POINTER_RAWONLY for GetPointerEvents() which does
pretty much the opposite of POINTER_NORAW.
Basically, this tells GetPointerEvents() that we only want the
DeviceChanged events and any raw events for this motion but no actual
motion events.
This is preliminary work for Xwayland to be able to use relative motion
events for raw events. Xwayland would use absolute events for raw
events, but some X11 clients (wrongly) assume raw events to be always
relative.
To allow such clients to work with Xwayland, it needs to switch to
relative raw events (if those are available from the Wayland
compositor).
However, Xwayland cannot use relative motion events for actual pointer
location because that would cause a drift over time, the pointer being
actually controlled by the Wayland compositor.
So Xwayland needs to be able to send only relative raw events, hence
this API.
Bump the ABI_XINPUT_VERSION minor version to reflect that API addition.
v2: Actually avoid sending motion events (Peter)
v3: Keep sending raw emulated events with RAWONLY (Peter)
Suggested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Related: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
Not all extensions can be enabled or disabled at runtime, list the
extensions which can from the help message rather than on error only.
v2:
* Print the header message in the ListStaticExtensions() (Peter
Hutterer)
* Do not export ListStaticExtensions() as Xserver API
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The definition relies on IOPortBase, which is only ever set in
hw/xfree86/os-support/bsd/arm_video.c
This caused build failures on linux/mips with GCC 10, due to this
change (from https://gcc.gnu.org/gcc-10/changes.html#c):
"GCC now defaults to -fno-common. As a result, global variable accesses
are more efficient on various targets. In C, global variables with
multiple tentative definitions now result in linker errors. With
-fcommon such definitions are silently merged during linking."
As a result anything including compiler.h would get its own definition
of IOPortBase and the linker would error out.
Commit 6a5a4e6037 removed the option to
configure useSIGIO option. Indeed, the xfree86 SIGIO support was
reworked to use internal versions of OsBlockSIGIO and OsReleaseSIGIO.
As a result, useSIGIO is no longer needed and can dropped
Fixes: 6a5a4e60 - Remove SIGIO support for input [v5]
Closes: xorg/xserver#1107
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@nxp.com>
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
By default, the macro DebugPresent() is a no-op but it can be enabled
at build time for debugging purpose.
However, doing so prevents the code to build because one debug statement
tries to make use of a non-existent variable:
present.c: In function ‘ms_present_queue_vblank’:
present.c:147:18: error: ‘vbl’ undeclared (first use in this function)
147 | vbl.request.sequence));
| ^~~
present.c:49:32: note: in definition of macro ‘DebugPresent’
49 | #define DebugPresent(x) ErrorF x
| ^
Fix the build with DebugPresent() by removing the vbl variable from the
debug message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
With !155, the device bus ID received via udev is constructed
properly with the "usb:" prefix. But, it is not enough to
make the following line to work in Section "Device":
BusID "usb:0:1.2:1.0"
Introduce BUS_USB, so the prefix can be distinguished from BUS_PCI
and check the supplied BusID value against device->attribs->busid
in xf86PlatformDeviceCheckBusID().
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
Resolves warnings from Oracle Parfait static analyser:
Error: Misleading macro
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'|' operator has higher precedence than ternary '?:' operator inside macro body at line 431
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 431
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 431
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 431
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 442
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 442
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 443
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'|' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 441
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 443
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
When the "CTM" (color transform matrix) modesetting property is available,
create a corresponding RandR property.
To match the format of the property available in the amdgpu driver, expose it as
an array of 18 32-bit XA_INTEGERs representing a 3x3 matrix in row-major order,
where each entry is a S31.32 sign-magnitude fixed-point number with the
fractional part listed first.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
If the kernel exposes GAMMA_LUT and GAMMA_LUT_SIZE properties and the size is
not what the server has pre-configured for the crtc, free the old gamma ramp
memory allocated by the server and replace it with new allocations of the
appropriate size.
In addition, when GAMMA_LUT is available, use drmModeCreatePropertyBlob() and
drmModeObjectSetProperty() to set the gamma ramp rather than using the legacy
drmModeCrtcSetGamma() function.
Add a new option "UseGammaLUT" to allow disabling this new behavior and falling
back to drmModeCrtcSetGamma() unconditionally.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Modeset properties can be set even when ms->atomic_modeset is disabled by using
the drmModeObjectSetProperty() function.
This will be necessary in a later change in order to set the GAMMA_LUT and CTM
properties.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
This is useful for mock input drivers that control the server in
integration tests. Given that input submission happens on a different
thread than processing, it's otherwise impossible for the driver to
synchronize with the completion of the processing of submitted events.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Fetch VariableRefresh option value from X conf file for
modesetting backend DDX driver. This option defaults to false,
and must be set to "true" in conf file for variable refresh
support in the DDX driver.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Window wrappers gets the notification when the window
properties changes. These wrappers are mainly used to
keep track of per-window _VARIABLE_REFRESH property values.
These changes have been ported from AMDGPU
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
These changes have been ported from AMD GPU DDX driver.
This patch adds support for setting the CRTC variable refresh property
for suitable windows flipping via the Present extension.
In order for a window to be suitable for variable refresh it must have
the _VARIABLE_REFRESH property set by the MESA and inform Modesetting
DDX driver with window property updates.
Then the window must pass the checks required to be suitable for
Present extension flips - it must cover the entire X screen and no
other window may already be flipping. And also DRM connector should
be VRR capable.
With these conditions met every CRTC for the X screen will have their
variable refresh property set to true.
Kernel Changes to support this feature in I915 driver is under development.
Tested with DOTA2, Xonotic and custom GLX apps.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Commit 1e3f9ea1 removed some NULL checks from xf86RandR12.c, on the premise that
they can't be reached unless RandR has already been initialized. For threesuch
calls, that's not true:
xf86Crtc.c::xf86CrtcScreenInit():
if (c == config->num_crtc) {
xf86RandR12SetRotations(screen, RR_Rotate_0 | RR_Rotate_90 |
RR_Rotate_180 | RR_Rotate_270 |
RR_Reflect_X | RR_Reflect_Y);
xf86RandR12SetTransformSupport(screen, TRUE);
}
else {
xf86RandR12SetRotations(screen, RR_Rotate_0);
xf86RandR12SetTransformSupport(screen, FALSE);
}
xf86Crtc.c::xf86CrtcCloseScreen():
xf86RandR12CloseScreen(screen);
This change adds checks back to xf86RandR12Set{Rotations,TransformSupport}() and
xf86RandR12CloseScreen(), checking that xf86RandR12KeyRec has been registered.
Without this, X will hit an assert that causes it to abort.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Since the introduction of "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize" the fb_id isn't initialited at
drmmode_xf86crtc_resize.
Rotate operation of XRandR uses rotate_bo. So in this case the fb_id
associated to the front_bo is not initialized at drmmode_set_mode_major.
So fd_id remains 0.
As every call to drmmode_xf86crtc_resize allocates a new front_bo we should
destroy unconditionally the old_front_bo if operation success. So we free
the allocated GBM handles.
This avoids crashing xserver with a OOM in the RPI4 1Gb at 4k resolution
after 3 series xrandr rotations from normal to left and vice versa reported at
https://github.com/raspberrypi/firmware/issues/1345
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1024
Fixes: 8774532121 "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize"
During a VT-Switch a raw pointer to the shared cursor object
is saved which is then freed (in case of low refcount) by a call to
xf86CursorSetCursor with argument pCurs = NullCursor.
This leads to a dangling pointer which can follow in a use after free.
This fix ensures that there is a shared handle saved for the VT-Switch cycle.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
None of the current BSD is actually using this code.
(checked DragonFly 5.8.1, FreeBSD 11.2, NetBSD 9.0 and OpenBSD 6.7)
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
In file included from ../glx/glxdri2.c:35:
/usr/local/include/GL/internal/dri_interface.h:43:10: fatal error: 'drm.h' file not found
#include <drm.h>
^~~~~~~
In file included from ../glx/glxdriswrast.c:39:
/usr/local/include/GL/internal/dri_interface.h:43:10: fatal error: 'drm.h' file not found
#include <drm.h>
^~~~~~~
Mostly http->https conversions, but also replaces gitweb.fd.o
with gitlab.fd.o, and xquartz.macosforge.org with xquartz.org.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
