This allows gpu devices to be specified in xorg.conf Screen sections.
Section "Device"
Driver "intel"
Identifier "intel0"
Option "AccelMethod" "uxa"
EndSection
Section "Device"
Driver "modesetting"
Identifier "usb0"
EndSection
Section "Screen"
Identifier "screen"
Device "intel0"
GPUDevice "usb0"
EndSection
This should allow for easier tweaking of driver options which
currently mess up the GPU device discovery process.
v2: add error handling for more than 4 devices, (Emil)
fixup CONF_ defines to consistency
add MAX_GPUDEVICES define
(yes there is two defines, this is consistent
with everywhere else).
remove braces around slp (Mark Kettenis)
man page fixups (Aaron)
v2.1: fixup whitespace (Aaron)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No modern driver pays attention to this. Presumably there existed
hardware once where you couldn't just read the right values out of the
CRTC.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The OutputClass section provides a way to match output devices to a set
of given attributes and configure them. For now, only matching by kernel
driver name is supported. This can be used to determine what DDX module
to load for non-PCI output devices. DDX modules can ship an xorg.conf.d
snippet (e.g. in /usr/share/X11/xorg.conf.d) that looks like this:
Section "OutputClass"
Identifer "NVIDIA Tegra open-source driver"
MatchDriver "tegra"
Driver "opentegra"
EndSection
This will cause any device that's driven by the kernel driver named
"tegra" to use the "opentegra" DDX module.
See the OUTPUTCLASS section in xorg.conf(5) for more details.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Tested-By: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch introduces a new key MatchSeat in xorg.conf (also applies to
any .conf file in xorg.conf.d). It will allow targeting a given
"Device", "Screen", and/or "ServerLayout" section to a particular
seat only (specified by option "-seat" in X server command line),
so that other seats won't be affected.
Without this patch, one needs to write a separate xorg.conf.custom
file and pass it to X server via "-config" option, if one wants that
these settings only apply for the right seat. However, in some cases,
this solution is undesirable or even impossible (e.g. when using GDM,
which doesn't allow X server command line customization).
Example file (/etc/X11/xorg.conf.d/seat1.conf), which would be ignored
by X server unless it was started with "-seat seat1" option:
Section "Device"
Identifier "card0"
Driver "nvidia"
Option "NoLogo" "True"
MatchSeat "seat1"
EndSection
Signed-off-by: Oleg Samarin <osamarin68@gmail.com>
Signed-off-by: Laércio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Include os.h for ErrorF() to fix implicit-function-declaration warnings when
configured with --enable-debug.
hw/xfree86/parser/DRI.c: In function 'xf86parseDRISection':
hw/xfree86/parser/DRI.c:87:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
hw/xfree86/parser/Extensions.c: In function 'xf86parseExtensionsSection':
hw/xfree86/parser/Extensions.c:77:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
No const value is ever assigned to it, let's not pretend it's const.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Only Xorg -configure uses a hardcoded value here, so let's not change the rest
of the server for that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The only place this isn't allocated is during Xorg -configure where we just
statically assing "mouse"/"kbd" and the identifiers for it. Everywhere else
it's strdup'd and then free'd already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This reverts commit f71de60355.
What warnings?
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make lots of string pointers 'const char' so that we can use constant
strings with them without eliciting warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace hardcoded SVR4 || linux || CSRG_BASED with an autoconf check and
the _POSIX_SAVED_IDS macro.
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Rename functions/macros from list_* to xorg_list_*
Rename struct from struct list to struct xorg_list.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In-sed-I-trust: Peter Hutterer <peter.hutterer@who-t.net>
Previously it always passed a format string with exactly one argument,
using NULL when the format string needed none. Now pass the right number
of arguments to clear gcc warnings of 'too many arguments for format'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Treat a scandir error from a missing (or unusable) directory return as
if it simply returned no files at all, which is what we want.
cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
After we tokenize val.str, we discard it.
This is just one example:
6 bytes in 1 blocks are definitely lost in loss record 24 of 652
at 0x4C2779D: malloc (in vgpreload_memcheck-amd64-linux.so)
by 0x4D744D: xf86getToken (scan.c:400)
by 0x4D75F1: xf86getSubToken (scan.c:462)
by 0x4DB060: xf86parseInputClassSection (InputClass.c:145)
by 0x4D664C: xf86readConfigFile (read.c:184)
by 0x490556: xf86HandleConfigFile (xf86Config.c:2360)
by 0x49AA77: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
After we convert the value to a boolean, we discard the string.
This is just one example:
3 bytes in 1 blocks are definitely lost in loss record 5 of 657
at 0x4C2779D: malloc (vgpreload_memcheck-amd64-linux.so)
by 0x4D744D: xf86getToken (scan.c:400)
by 0x4D75F1: xf86getSubToken (scan.c:462)
by 0x4DB3E0: xf86parseInputClassSection (InputClass.c:189)
by 0x4D664C: xf86readConfigFile (read.c:184)
by 0x490556: xf86HandleConfigFile (xf86Config.c:2360)
by 0x49AA77: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
v2: move the free()s to the function that calls scandir
80 bytes in 1 blocks are definitely lost in loss record 411 of 631
at 0x4C2779D: malloc (vgpreload_memcheck-amd64-linux.so)
by 0x4C27927: realloc (vgpreload_memcheck-amd64-linux.so)
by 0x696A80D: scandir (scandir.c:108)
by 0x4D8828: OpenConfigDir (scan.c:854)
by 0x4D8A43: xf86openConfigDirFiles (scan.c:952)
by 0x49031F: xf86HandleConfigFile (xf86Config.c:2327)
by 0x49A9E3: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We call xf86penConfigDirFiles twice, so we overwrite the configDirPath
variable, losing the pointer. If we move the pointer management to the
upper layer (the function callers), they will be able to call these
functions as many times as they want, but they'll have to free those
returned values.
v2: don't leak inside XWin
4,097 bytes in 1 blocks are definitely lost in loss record 625 of 632
at 0x4C2779D: malloc (in vgpreload_memcheck-amd64-linux.so)
by 0x4D7899: DoSubstitution (scan.c:615)
by 0x4D87B0: OpenConfigDir (scan.c:845)
by 0x4D8A2D: xf86openConfigDirFiles (scan.c:955)
by 0x49031F: xf86HandleConfigFile (xf86Config.c:2327)
by 0x49A9BF: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
As long as we're carrying around a compatibility copy in os/strl*.c,
might as well use them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Use the same struct for both InputOption and XF86OptionRec so we don't need
to convert to and fro the two in the config backends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In all cases, the pointer was simply type-cast anyway. Let's get some
compile-time type safety going, how about that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Squashed in:
xfree86: Move definition of xf86OptionPtr into separate header file
The pile of spaghettis that is the xfree86 include dependencies make it
rather hard to have a single typedef somewhere that's not interfering with
everything else or drags in a whole bunch of other includes.
Move the xf86OptionRec and GenericListRec declarations into a separate
header.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Usage example (tested on a dual-seat PC):
Section "InputClass"
Identifier "keyboard-all"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
MatchLayout "!GeForce|!Matrox"
Driver "evdev"
Option "XkbLayout" "us"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
It disables auto keyboard configuration for layouts "GeForce" and "Matrox".
Note that "" in patterns means "no Layout sections found", e.g.
MatchLayout "GeForce|"
is "in layout GeForce or without explicit layout at all".
Signed-off-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Pointer.c: In function 'xf86parsePointerSection':
Pointer.c:192:5: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
In order to use libxf86config in a shared library, all the code must be
compiled with -fPIC. Add proper PIC support for libxf86config by turning
it into a libtool library. However, since we don't want to guarantee API
or ABI stability, make sure it's only built static.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
https://bugs.freedesktop.org/show_bug.cgi?id=32436
Fix typo introduced in 2416255f7e that breaks builds when
configured --enable-install-libxf86config
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Simon Thum <simon.thum@gmx.de>
Requires linking xprintf.c into libxf86config for those who build it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Not used in the initial import, and also not documented.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This was only ever used from the glint driver, which has since lost its
DRI support.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This was to distinguish XFree86 3.x files from XFree86 4.x files. It
never really made sense to be looking for xorg.conf-4.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We assume already that our X implementation is POSIX compliant anyway. So
remove those redundant checking.
SA_SIGINFO is left there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
This was included in the original commit, and then never used.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
AUTOREPEAT_MSG, MOVED_TO_FLAGS_MSG, and XLEDS_MSG made obsolete by
81913a1291 Jul 21 2006 (remove undead files from master)
UNDEFINED_DEVICE_MSG made obsolete by
6033d8150b Oct 9 2007 (first pass at video driver autoloading)
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
[mattst88: fixed whitespace and a missing semicolon]
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
These are leftovers from when X still used Xmalloc and friends for allocation.
Now that those are gone, these comments are just confusing.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>
When the parser sees the "keyboard" driver, it automatically (and
silently) replaces it with the constant string "kbd".
Everybody else uses malloc'd memory for the driver name, so input
device closure assumes it can use free.
Free val.str, so this crash doesn't turn into a memory leak. Whew.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
