This add a new flag POINTER_RAWONLY for GetPointerEvents() which does
pretty much the opposite of POINTER_NORAW.
Basically, this tells GetPointerEvents() that we only want the
DeviceChanged events and any raw events for this motion but no actual
motion events.
This is preliminary work for Xwayland to be able to use relative motion
events for raw events. Xwayland would use absolute events for raw
events, but some X11 clients (wrongly) assume raw events to be always
relative.
To allow such clients to work with Xwayland, it needs to switch to
relative raw events (if those are available from the Wayland
compositor).
However, Xwayland cannot use relative motion events for actual pointer
location because that would cause a drift over time, the pointer being
actually controlled by the Wayland compositor.
So Xwayland needs to be able to send only relative raw events, hence
this API.
Bump the ABI_XINPUT_VERSION minor version to reflect that API addition.
v2: Actually avoid sending motion events (Peter)
v3: Keep sending raw emulated events with RAWONLY (Peter)
Suggested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Related: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The input thread should generate events, not send them. Make it easier to
find the instances where it's doing so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Special case for the systemd-logind case in xfree86: when we're vt-switched
away and a device is plugged in, we get a paused fd from logind. Since we
can't probe the device or do anything with it, we store that device in the
xfree86 and handle it later when we vt-switch back. The device is not added to
inputInfo.devices until that time.
When the device is removed while still vt-switched away, the the config system
never notifies the DDX. It only runs through inputInfo.devices and our device
was never added to that.
When a device is plugged in, removed, and plugged in again while vt-switched
away, we have two entries in the xfree86-specific list that refer to the same
device node, both pending for addition later. On VT switch back, the first one
(the already removed one) will be added successfully, the second one (the
still plugged-in one) fails. Since the fd is correct, the device works until
it is removed again. The removed devices' config_info (i.e. the syspath)
doesn't match the actual device we addded tough (the input number increases
with each plug), it doesn't get removed, the fd remains open and we lose track
of the fd count. Plugging the device in again leads to a dead device.
Fix this by adding a call to notify the DDX to purge any remainders of devices
with the given config_info, that's the only identifiable bit we have at this
point.
https://bugs.freedesktop.org/show_bug.cgi?id=97928
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add a valuator mask setter for setting absolute coordinate combined
with unaccelerated motion deltas. This will later be used by Xwayland
to combine a wl_pointer.motion() event with the unaccelerated delta of
a wp_relative_pointer.relative_motion() event.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This patch introduces a new flag ATTR_KEY for hotplugged input devices,
so we can better distinguish between real keyboards (i.e. devices with
udev property ID_INPUT_KEYBOARD="1") and other key input devices like
lid switches, power buttons, etc.
All supported hotplug backends (udev, hal, and wscons) will set both
flags ATTR_KEY and ATTR_KEYBOARD for real keyboards, but udev backend
will set ATTR_KEY, but not ATTR_KEYBOARD, for non-keyboard key input
devices (hal and wscons will set both flags in any case). With this
distinction, kdrive input hotplugging mechanism will be allowed to only
grab real keyboards, as other key input devices are currently not
supported.
In order to don't break current behaviour, this patch will replace all
ATTR_KEYBOARD occurrences with ATTR_KEY in hw/xfree86/common/xf86Xinput.c.
[ajax: Just add ATTR_KEY, don't re-number the other attributes]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add _X_EXPORT to GetMaster function. It is required by tigervnc's VNC module.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Even though -Wcomment doesn't mind it (in gcc or clang), the appearance
of */* confuses the syntax highlighter of some editors (eg. vim), and
causes warnings in MSVC.
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows DDXen to override the window picking to account for
native windows not seen by the X server. The bulk of the picking logic
is exposed as a new helper function, miSpriteTrace(). This function
completes the sprite trace filled out by the caller, and can be set up
to start the search from a given toplevel window.
v2: Leave existing XYToWindow API in place for API compatibility
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
No functional changes, just making a better case for why MAP_LENGTH is 256.
"But can't we remove MAP_LENGTH then?" I hear you say? "Why, yes. Go for it!"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Introduced in fecc7eb1cf and reverts most of
that but it's helpfully mixed with other stuff.
InputAttributes are not const, they're strdup'd everywhere but the test code
and freed properly. Revert the const char changes and fix the test up instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Lots more const char stuff.
Remove duplicate defs of CoreKeyboardProc and CorePointerProc from
test/xi2/protocol-common.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
VNC needs key_is_down to check if a key is processed as down before it
simulates various key releases. Make it available, because I seriously can't
be bothered thinking about how to rewrite VNC to not need that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Keith Packard <keithp@keithp.com>
A sync grab is the owner once it gets events. If it doesn't replay the
event it will get all events from this touch, equivalent to accepting it.
If the touch has ended before XAllowEvents() is called, we also now need to
send the TouchEnd event and clean-up since we won't see anything more from
this touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
e02f864fdf "Suppress cursor display until the first XDefineCursor() request"
disabled cursor display a priori unless -retro is given.
On a plain server, caling XFixesHideCursor() and XFixesShowCursor() would
show the default root cursor, despite no client actually defining a cursor.
Change the logic, disable CursorVisible by default and only enable it from
the window's CWCursor logic. If no window ever defines a cursor, said cursor
stays invisible.
X.Org Bug 58398 <http://bugs.freedesktop.org/show_bug.cgi?id=58398>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For absolute events, if the client specifies a screen number offset the
coordinates by that. And add a new flag so we know when _not_ to add the
screen offset in GPE.
Without this offset and the flag, GPE would simply add the offset of the
current screen if POINTER_SCREEN is set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Instead of guessing what resource type the listener is and what property to
retrieve, store the resource type in the listener directly.
Breaks XIT test cases:
TouchGrabTestMultipleTaps.PassiveGrabPointerEmulationMultipleTouchesFastSuccession
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=56557
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
This places a pointer to the grab related to a TouchListener directly
in the TouchListener structure rather than hoping to find the grab
later on using the resource ID.
Passive grabs have resource ID in the resource DB so they can be
removed when a client exits, and those resource IDs get copied when
activated, but implicit grabs are constructed on-the-fly and have no
resource DB entry.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of having the pointer barrier code enqueue events separately from
GetPointerEvents, pass the event list through and let it add to it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Rather than riding on the ConstrainCursorHarder hook, which has
several issues, move to an explicit hook, which will help us with
some RANDR interaction issues.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
As before GetTouchEvents causes unwanted side effects. Add a new
function GetDixTouchEnd, which generates a touch event from the touch
point. We fill in the event's screen coordinates from the MD's current
sprite position.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetTouchEvents has plenty of side effects such as moving the pointer or
updating the master device, which we don't want to happen when
replaying. The only reason for calling it was to generate a DCCE event,
but GetTouchEvents doesn't even do that right (we might need a DCCE
event even when replaying a master event, or clients could interpret
valuator data incorrectly).
This discussion is moot at the moment anyway, since DeliverTouchEvents
doesn't appear to deliver DCCE events.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
[Added call to processInputProc instead of direct call to DeliverTouchEvents]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Otherwise:
* We can't end the touches while device is disabled
* New touches after enabling the device may erroneously be mapped to old
logical touches
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
f3410b97cf introduced a regression on server
shutdown. If any button or key was held on shutdown (ctrl, alt, backspace
are usually still down) sending a raw event will segfault the server. The
the root windows are set to NULL before calling CloseDownDevices().
Avoid this by disabling all devices first when shutting down. Disabled
devices won't send events anymore.
Master keyboards must be disabled first, otherwise disabling the pointer
will trigger DisableDevice(keyboard) and the keyboard is removed from the
inputInfo.devices list and moved to inputInfo.off_devices. A regular loop
through inputInfo.devices would thus jump to off_devices and not recover.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The function will be used for building a sprite for pointer emulation
after an explicit device grab. This commit refactors the code so that
TouchBuildSprite will function with any event type and moves the checks
to the caller.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for accepting and rejecting touches in the future.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If there is only one listener of a touch, the listener is a grab, and is
accepted before the touch has ended, the current code will not end the
touch record when the touch does end.
This change adds a listener state for when a touch is accepted but has
not yet ended. We now keep the touch record alive in this state, but end
it when the touch ends.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This doesn't really implement early accept as it should. Ideally, the
server should send end events to all subsequent touch clients as soon as
an early accept comes in. However, this implementation is still protocol
compliant. We can always improve it later.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Povilas Kanapickas
Olivier Fourdan
Adam Jackson
Peter Hutterer
Jonas Ådahl
Keith Packard
Laércio de Sousa
Michal Srb
Peter Harris
Kristian Høgsberg
Jasper St. Pierre
Thomas Jaeger
Chase Douglas
Michal Suchanek