After collecting the driver's default options, report the list of options
set for the device before calling PreInit(). This helps with debugging those
cases where options are not merged correctly.
xf86OptionListReport reports with verbosity 5, higher than the default
verbosity so this won't generate logspam in the default case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
If a device doesn't send valuators, don't try to move its position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Single allocation point for input devices, most notably a single point to
reset default values.
Without this patch, the file descriptor default was -1 for hotplugged
devices and 0 for config devices. Drivers that don't overwrite the default
themselves would thus fail if configured in the xorg.conf.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Some devices should be initialised as floating from the start (e.g.
Joysticks and accelerometers benefit from this). Currently users use the
"SendCoreEvents" "off" flag for this, which isn't the most appropriate
naming.
Add an option "Floating", deprecate the others. Still parsed and handled by
the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Maybe it's just me but every time I look at it I get confused again and need
to work it out from scratch. Rename the parameters to something
self-explanatory, to/from and min/max.
No functional change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
We have a driver hook - it's UnInit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
This struct is superfluous, maintaining the same info as the InputInfoRec
(with the exception of the driver name).
This is a rather large commit with the majority of changes being a rename
from the fields of the IDevRec (idev, commonOptions) to the InputInfoRec
(pInfo, options).
The actual changes affect the initialization process of the input device:
In NewInputDeviceRequest, the InputInfoRec is now always allocated and just
added to the internal list in xf86NewInputDevice() if the init process
succeeded.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
When no identifier for the device was specified, the allocated IDevRec (and
its associated fields) need to be freed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
And unexport it, drivers don't need to call this in the new init process.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
InputInfoRec hasn't had a free function pointer since the git import.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
None of them are called by the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
This field was only used in one location where we can use a local variable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Instead of shoving it in rather unrelated places, move acceleration init
into xf86NewInputDevice.
Caveat: It's not clear atm how relevant other callers of ActivateDevice
(like OpenDevice) actually are.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Two names pointing to the same struct for over 7 years now. Remove the
define, if drivers don't want to change they can always do the typedef
themselves.
Rename all "LocalDevicePtr local" to "InputInfoPtr pInfo".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Make xf86AllocateInput static in the process, this function is only called
from one location.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Right now, Xephyr and others don't get to use XKB on the slave devices.
Which works given that no-one cares about SDs just yet but event processing
is different if the ProcessInputProc isn't wrapped properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
From the documentation:
"This is mainly to allow a touch screen to be used with netscape and other
browsers which do strange things if the mouse moves between button down and
button up."
CLOSED - NOTOURBUG
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
PreInit returns a status code. Let's use that instead of having it report
Success in some cases but not set the XI86_CONFIGURED flag and thus signal
an init failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
ActivateGrab and DeactivateGrab are set in AddInputDevice() already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No-one but the joystick driver uses it and that one should be using NIDR
instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
config_info is the only reliable indicator we have in the server for
duplicate devices (drivers can test for maj/min on fds as well). Don't set
this after the device has been initialized but assume it's important enough
to set during NIDR.
This makes the option "config_info" available to the drivers as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The main change introduced in this patch is the removal of the
back-and-forth between DDX and the driver.
The DDX now allocates the InputInfoRec and fills it with default values. The
DDX processes common options (and module-specific default options, if
appropriate) before passing the initialised struct to the driver.
The driver may do module-specific initializations and return Success or an
error code in the case of a failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
../../../../hw/xfree86/common/xf86Xinput.c: In function ‘xf86AllocateInput’:
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: implicit
declaration of function ‘DuplicateModule’
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: nested extern
declaration of ‘DuplicateModule’
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: assignment makes
pointer from integer without a cast
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
None of them do anything useful now that pointer acceleration is
entirely handled in the server. (Does not completely nuke yet,
since that would be an API/ABI break.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Often we want to apply a driver specific option to a set of devices and
don't care how the driver was selected for that device. The MatchDriver
entry can be used to match the current driver string:
MatchDriver "evdev|mouse"
Option "Emulate3Buttons" "yes"
The driver string is a case sensitive match.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently when there multiple InputClass entries of the same type, only
the last entry is used and the previous ones are ignored. Instead,
multiple entries are used to create multiple matching conditions.
For instance, an InputClass with
MatchProduct "foo"
MatchProduct "bar"
will require that the device's product name contain both foo and bar.
This provides a complement to the || style matching when an entry is
split using the "|" token.
The xorg.conf man page has added an example to hopefully clarify the two
types of compound matches.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
