XI 1.x events still contain absolute coordinates anyway. By the time we get
to the InternalEvent to XI event conversion, the valuators are already
absolute.
Stopping because of a different mode on a valuator is not necessary.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Performing bit-wise operations on a boolean amounts to mixing types,
is confusing and basically incorrect; one should only perform
logical operations on booleans.
Performing such operations relies on the implementation detail
that a boolean is in fact an integer and that its value FALSE
is implemented as zero.
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The macro has been changed to do this already, no need for double
not-not-ing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
valuator_mask_size() returns the highest valuator set as opposed to the
number of set bits (which obviously changes as we unset valuators).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't stop processing events when a valuator's mode doesn't match the 0th
valuator's mode. Instead, start with the first_valuator in the event and
keep stacking them on until the first valuator with a different mode is hit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
The DeviceEvent's mode field is a set of bits for each valuator, not bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This check was missing the OutOfProximity mask and resulted in the wrong
bits being set in InternalEvents.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
transformAbsolute must use old values if valuator mask doesn't have new
ones, and it must only set new values if there was a change.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead always paint root tiled (-retro like), protocol calls
(XSetWindowBackgroundPixmap and related) should behave accordingly when None
and ParentRelative is set as background pixmap.
It follow what the protocol states: "changing the background of a root window
to None or ParentRelative restores the default background pixmap".
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
It lets the driver notify the server whether it can draw a background when
'-background none' option is used by the system platform. Use cases for that
could be video drivers performing mode-setting in kernel time, before X is up,
so a seamless transition would happen until X clients start to show up.
If the driver can copy the framebuffer cleanly then it can set the flag
(canDoBGNoneRoot), otherwise the server will fallback to the normal behaviour.
The system must explicit indicates willingness of doing so through
'-background none'. We could do this option as default; in such case,
malicious users would be able to steal the framebuffer with a bit of tricks.
For instance, I can see the content of my nVidia Quadro FX 580 framebuffer
old X session modifying a bit nv driver:
xf86DPMSInit(pScreen, xf86DPMSSet, 0);
- /* Clear the screen */
- if(pNv->xaa) {
- /* Use the acceleration engine */
- pNv->xaa->SetupForSolidFill(pScrn, 0, GXcopy, ~0);
- pNv->xaa->SubsequentSolidFillRect(pScrn,
- 0, 0, pScrn->displayWidth, pNv->offscreenHeight);
- G80DmaKickoff(pNv);
- } else {
- /* Use a slow software clear path */
- memset(pNv->mem, 0, pitch * pNv->offscreenHeight);
- }
+ pScreen->canDoBGNoneRoot = TRUE;
The commit is originally based on discussions happened on xorg-devel:
http://lists.freedesktop.org/archives/xorg-devel/2010-June/009755.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Acked-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Protocol doesn't mention about screen saver with logo being required and
people are already using more intelligent ways to draw screen saver themes. So
consider -logo as deprecated option, deleting its code.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL) {
- free(E);
(
- E = NULL;
|
- E = 0;
)
- }
+ free(E);
+ E = NULL;
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously the OutOfProximity bit in the valuator mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
XI1 doesn't cater for mixed mode devices, so bail out on the first valuator
that has a different mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Returns the mode of the specified valuator.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
We only skip relative events for proximity, not absolute ones. Now with
mixed mode, just unset those axes that are relative.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
With the switch to masks internally, this isn't needed anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The valuators are stored inside the mask, use it from there. are stored
inside the mask, use it from there. are stored inside the mask, use it from
there. are stored inside the mask, use it from there.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Function to count the number of bits set in the given array.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Without this patch, any negative valuator value is wrong when returned
from XQueryDeviceState(). This is a regression from at least xserver
1.4.
Valuator data is set in dix/getevents.c:set_valuators() by copying
signed int values into an unsigned int field
DeviceEvent.valuators.data.
That data is converted into a double with an implicit cast by
assignment to axisVal[i] in Xi/exevents.c:UpdateDeviceState().
That double is converted back to a signed int in
queryst.c:ProcXQueryDeviceState(). If the original value in
set_valuators() is negative, the double value will be > 2^31 and the
conversion back to a signed int is undefined. (Although I
consistently see the value -2^31.)
Fix this by changing the definition of DeviceEvent.valuators.data from
uint32_t to int32_t.
Signed-off-by: Joe Shaw <joeshaw@litl.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All these now generate InternalEvents, point this out. Remove XKB/XI
references, that's just confusing. This comment referred to the old-style
event generation code from server 1.4 to including 1.6 but is now just
confusing to newcomers.
Remove comment about SwitchCoreKeyboard() for the same reason.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Move the basic sanity checking to an inline wrapper, which avoids the
function call overhead if the callback list is empty. On an XACEful
server on a 2.4GHz Core 2 Duo:
1 2 Operation
-------- ----------------- -----------------
20000000.0 25100000.0 ( 1.25) X protocol NoOperation
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Drop DRAWABLE_BUFFER and related checks, mbuf was the only thing that
used them and it was killed in 0ba82562.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
This just simplifies ComputeFreezes, eliminating some duplicated code
and a goto.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckPassiveGrabsOnWindow returns FALSE if pWin->optional is NULL,
because wPassiveGrabs uses wUseDefault, so don't bother checking at the
caller.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckDeviceGrabs checked all the ancestors of the window containing this
device's pointer even if no new grabs could possibly apply due to the
device already being grabbed.
ActivateFocusInGrab and ActivateEnterGrab already checked whether they
should break an existing grab, and then set up an event that was
completely ignored if they didn't actually break the grab.
In both cases, just do what we would have done eventually anyway--return
FALSE from CheckPassiveGrabsOnWindow's caller--but do it sooner.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some functions had to be moved around due some missing static definitions.
Another minor clean up like inexistent function declarations and etc were made
also.
Part of this patch was cooked using:
sed -i -e '/static DISPATCH_PROC*.*;/d' `git ls-files`
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This replaces dixCreatePrivateKey and the only uses, which were in
midispcur.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The server and drivers sometimes use GetScratchGC, but never
CreateScratchGC.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The SELinux extension does store a security label in the screen
devPrivates. Fixes crash caused by overwriting another private.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reported-by: Justin Mattock <justinmattock@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
