RRCrtcGammaSetSize cannot be used yet in xf86InitialConfiguration,
because randr_crtc isn't allocated yet at that point, but a following
change will require RRCrtcGammaSetSize to be called from
xf86RandR12CrtcInitGamma.
v2:
* Bail from xf86RandR12CrtcInitGamma if !crtc->funcs->gamma_set (Keith
Packard)
Reviewed-by: Keith Packard <keithp@keithp.com>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Changes PRIME to use double buffering and synchronization if all required
driver functions are available.
rrcrtc.c:
Changes rrSetupPixmapSharing() to use double buffering and
synchronization in the case that all required driver functions are
available. Otherwise, falls back to unsynchronized single buffer.
Changes RRCrtcDetachScanoutPixmap() to properly clean up in the case of
double buffering.
Moves StopPixmapTracking() from rrDestroySharedPixmap() to
RRCrtcDetachScanoutPixmap().
Changes RRReplaceScanoutPixmap() to fail if we are using double buffering,
as it would need a second ppix parameter to function with double buffering,
and AFAICT no driver I've implemented double buffered source support in uses
RRReplaceScanoutPixmap().
randrstr.h:
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME
double buffering.
xf86Crtc.h:
Adds current_scanout_back to _xf86Crtc to facilitate detection
of changes to it in xf86RandR12CrtcSet().
xf86RandR12.c:
Changes xf86RandR12CrtcSet() to detect changes in
scanout_pixmap_back.
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME double
buffering.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and
(rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec
Add fallback if flipping funcs fail
v4: Detach scanout pixmap when destroying scanout_pixmap_back, to avoid
dangling pointers in some drivers
v5: Disable RRReplaceScanoutPixmap for double-buffered PRIME, it would need an
ABI change with support for 2 pixmaps if it were to be supported, but AFAICT
no driver that actually supports double-buffered PRIME uses it.
Refactor to use rrEnableSharedPixmapFlipping() as a substitute for
rrCrtcSetScanoutPixmap() in the flipping case.
Remove extraneous pSlaveScrPriv from DetachScanoutPixmap()
Remove extraneous protopix and pScrPriv from rrSetupPixmapSharing()
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Consolidate to a single if/else statement and eliminate the redundant
local variable in_range and assignments to x/y.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The driver can now specify exactly which aspects of the transform it
wants to handle via XF86DriverTransform* flags.
Since the driver can now choose whether it wants to receive transformed
or untransformed cursor coordinates, xf86CrtcTransformCursorPos no
longer needs to be available to drivers, so make it static.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Even if the driver is handling the transform, we still need to transform
the cursor position for clipping, otherwise we may hide the HW cursor
when the cursor is actually inside the area covered by the CRTC.
v2: Use crtc_x/y local variables for clarity
Reviewed-by: Adam Jackson <ajax@redhat.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
No longer needed now that xf86CursorResetCursor is getting called for
each CRTC configuration change.
v2: Keep xf86_reload_cursors as a deprecated empty inline function
until all drivers stop calling it. (Adam Jackson)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Fixes a crash on startup in the radeon driver's drmmode_show_cursor()
due to xf86_config->cursor == NULL, because no CRTC was enabled yet, so
xf86_crtc_load_cursor_image was never called.
(Also use scrn->pScreen instead of xf86ScrnToScreen(scrn))
v2: Set xf86_config->cursor at the beginning of xf86_load_cursor_image
instead of at the end.
Reviewed-by: Keith Packard <keithp@keithp.com>
This makes the cursor pointer held by xf86Cursors.c get reset to NULL
whenever the cursor isn't displayed, and means that the reference
count held in xf86Cursor.c is sufficient to cover the reference in
xf86Cursors.c.
As HideCursor may be called in the cursor loading path after
UseHWCursor or UseHWCursorARGB when HARDWARE_CURSOR_UPDATE_UNHIDDEN
isn't set in the Flags field, the setting of the cursor pointer had to
be moved to the LoadCursor paths.
LoadCursorARGBCheck gets the cursor pointer, but LoadCursorImageCheck
does not. For LoadCursorImageCheck, I added a new function,
xf86CurrentCursor, which returns the current cursor. With this new
function, we can eliminate the cursor pointer from the
xf86CrtcConfigRec, once drivers are converted over to use it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Slave GPUs don't have a root window to set this on, so don't.
This fixes some crashes I saw just playing around.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When the HW cursor is hidden (e.g. because xf86CursorResetCursor
triggers a switch from HW cursor to SW cursor), the driver isn't
notified of this for disabled CRTCs. If the HW cursor was shown when the
CRTC was disabled, it may still be displayed when the CRTC is enabled
again.
Prevent this by explicitly hiding the HW cursor again after setting a
mode if it's currently supposed to be hidden.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94560
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Add xf86CursorResetCursor, which allows switching between HW and SW
cursor depending on the current state.
Call it from xf86DisableUnusedFunctions, which is called after any CRTC
configuration change such as setting a mode or disabling a CRTC. This
makes sure that SW cursor is used e.g. while a transform is in use on
any CRTC or while there are active PRIME output slaves, and enables HW
cursor again once none of those conditions are true anymore.
Reviewed-by: Keith Packard <keithp@keithp.com>
We currently don't handle transforms for the HW cursor image, so return
FALSE to signal a software cursor must be used if a transform is in use
on any CRTC.
v2: Check crtc->transformPresent instead of crtc->transform_in_use. The
latter is TRUE for rotation as well, which we handle correctly.
Reviewed-by: Keith Packard <keithp@keithp.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The correct refresh rate for this mode is 75, not 85.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
When xf86RandR12Key is not set we will not get to the places where
these tests are done as the functions in question are not called.
In most cases we would have crashed before these checks anyway.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If no compat_output is defined, we inadvertently (attempt to) return
whatever data is at index -1. Instead, return NULL since that's what
callers are expecting.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
This creates an automatic monitor for a tiled monitor at startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the tiles of the monitor in the right place at
X server startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change the X server default to do right-of placement
at startup. This gives an option to allow drivers to
override this placement, which has been used for server
drivers where both heads are not in the same physical
place.
Been in Fedora for a few years, but for tiled monitors
we really want something along these lines.
This is an ABI break.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add support for drivers to set the tiling
property. This is used by clients to
work out the monitor tiles for DisplayID
monitors.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Don't try to destroy rotation_damage in the xf86RotateCloseScreen; it
will have been destroyed when the screen pixmap was destroyed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When no shadow frame buffer is needed, the rotate block handler
doesn't need to be called any more. Remove it from the chain.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
xf86Rotate, it was delaying unwrapping the BlockHandler until after
calling xf86RotateRedisplay. If there was a software cursor on the
screen, the redisplay operation would cause cursor to be removed from
the frame buffer and the misprite block handler to be inserted into
the block handler chain with the misprite screen private saved block
handler now set to xf86RotateBlockHandler.
When xf86RotateRedisplay returned, xf86RotateBlockHandler would then
set screen->BlockHandler to its saved value, call down and then reset
screen->BlockHandler to xf86RotateBlockHandler. miSpriteBlockHandler
would never be called after that, which meant that the software cursor
will now disappear from the screen whenever rendering overlapped and
would only reappear when the cursor was moved.
To correct this, all that is needed is to move the restoration of
screen->BlockHandler to the top of xf86RotateBlockHandler, before the
call to xf86RotateRedisplay.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Create load_cursor_image_check, load_cursor_argb_check,
LoadCursorImageCheck and LoadCursorARGBCheck that can return failure
and use them in preference to the old unchecked variants.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
When setting crtc->gamma_size to randr_crtc->gammaSize we should
use randr_crtc->gammaSize to allocate new gamma table in crtc.
Currently, if randr_crtc->gammaSize > crtc->gammaSize the subsequent
memcpy will overwrite memory beyond the end of gamma table.
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
load_cursor_argb() may need to be able to fail and have the server fall back
to a software cursor in at least the following circumstances.
1) The hardware can only support some ARGB cursors and this does not just
depend on cursor size.
2) Virtual hardware may not wish to pass through a cursor to the host at a
particular time but may wish to accept the same cursor at another time.
This patch adds a return value to the API and makes the server do the
software fall-back on failure.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The detailed timings are for a 15.6" display when max image size
correctly reports 13.3".
Signed-off-by: Arun Raghavan <arun@accosted.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This gets the easy warnings, mostly constant string problems.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of only relying on the Range section, we can do better on
HDMI to find out what is the max dot clock the monitor supports. The
HDMI CEA vendor block adds a TMDS max freq we can use.
This makes X not prune 4k resolutions on HDMI.
v2: Replace X_INFO by X_PROBED in the message that prints the max
TMDS frequency (Chris Wilson)
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
With outputless GPUs showing up we crash here if there are not outputs
try and recover with a bit of grace.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
EDID sometimes lies about screen sizes. Since the screen size is used
by clients to determine the DPI a wrong ration will lead to terrible
looking fonts.
Add a sanity check for the h/v ratio cutting off at 2.4. This would
still accept the cinemascope aspect ratio as valid.
Also add message suggesting to add a quirk table entry.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
You can only register one drawable on a given damage, so there's no
reason to require the caller to specify the drawable, the damage is
enough. The implementation would do something fairly horrible if you
_did_ pass mismatched drawable and damage, so let's avoid the problem
entirely.
v2: Simplify xf86RotateDestroy even more [anholt]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Commit 8f4640bdb9 fixed a bit of a
chicken-and-egg problem by detaching GPU screens when their providers
are destroyed, which happens before CloseScreen is called. However,
this created a new problem: the GPU screen tears down its RandR crtc
objects during CloseScreen and if one of them is active, it tries to
detach the scanout pixmap then. This crashes because
RRCrtcDetachScanoutPixmap tries to get the master screen's screen
pixmap, but crtc->pScreen->current_master is already NULL at that
point.
It doesn't make sense for an unbound GPU screen to still be scanning
out its former master screen's pixmap, so detach them first when the
provider is destroyed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>