Initialize the depth corresponding to the root window before the
pixmap-only depths. Otherwise you end up with the root window depth in
the depth list twice, which is mildly confusing for clients and
catastrophically confusing for PanoramiXConsolidate().
Make xf86 RANDR wrap the EnterVT call chain, so it can re-probe the
outputs when a laptop comes back from suspend/unsuspend (actually, any
time that we enter our VT again). The X server should then send RR*
events to clients, so they can cope with a monitor that was unplugged
while the laptop was suspended.
Signed-off-by: Federico Mena Quintero <federico@novell.com>
Update icons directly to windows rather than modifying
the window's class. Respect custom icons overriden via
the configuration file.
fd.o bugzilla #4491
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Changed windialogs.c to set icons via window properties rather than class
properties, and use LoadImage() for small icons, because LoadIcon() can only open
large icons. Since this code is redundant across the dialogs, I put it in the
winCenterDialog function, along with a few other redundant instructions, and
renamed in winInitDialog().
Also, don't bogusly put our dialogs at the center of the virtual desktop if we
are on a multimonitor system (this causes the dialog to end up split across two
monitors in a dual-monitor side-by-side setup)
Corrections to use HWND_TOPMOST instead of HWND_TOP and not to use SWP_NOZORDER
from Colin Harrison
fd.o bugzilla #4491
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Many old monitors zero-fill the detailed descriptors, so check for that
to avoid a useless warning like:
(WW) RADEON(0): Unknown vendor-specific block 0
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 987579c930 moves main.c into
into libmain.a to be linked with separately, and updates the various
DDXs to link with libmain.a, except Xwin, which also needs this change.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
It reports vertical size in cm in the detailed mode.
X.Org bug#21750 <http://bugs.freedesktop.org/show_bug.cgi?id=21750>
Reported-by: Peter Poklop <Peter.Poklop@gmx.at>
Signed-off-by: Julien Cristau <jcristau@debian.org>
This way clients querying the gamma value via the VidMode extension at least
get the last value set via the same, rather than always something bogus.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
The reciprocal gamma value was missed in the first copy and this mistake was
propagated to the second one.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Error: Write outside array bounds at Xext/geext.c:406
in function 'GEWindowSetMask' [Symbolic analysis]
In array dereference of cli->nextSib[extension] with index 'extension'
Array size is 128 elements (of 4 bytes each), index <= 128
Error: Buffer overflow at dix/events.c:592
in function 'SetMaskForEvent' [Symbolic analysis]
In array dereference of filters[deviceid] with index 'deviceid'
Array size is 20 elements (of 512 bytes each), index >= 0 and index <= 20
Error: Read buffer overflow at hw/xfree86/loader/loader.c:226
in function 'LoaderOpen' [Symbolic analysis]
In array dereference of refCount[new_handle] with index 'new_handle'
Array size is 256 elements (of 4 bytes each), index >= 1 and index <= 256
These bugs were found using the Parfait source code analysis tool.
For more information see http://research.sun.com/projects/parfait
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A driver with this hook will take care of preparing the outputs & crtcs,
so calling the prepare functions will just cause unnecessary flicker.
Fixes bug #21077
For redirected rendering we end up with pixmaps (which the app thinks are
windows) that are double buffered.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Pierre Willenbrock <pierre@pirsoft.de>
Zapping is triggered by xkb these days, so note in the man page that it's the
Terminate_Server action. Since it's XKB, personal preferences towards or
against zapping should be achieved through xkb rulesets.
If Terminate_Server is not in the xkb actions, then we can't zap anyway and we
don't need a default of DontZap "on".
This patch restores the old meaning of DontZap - disallow zapping altogether,
regardless of XKB's current keymap.
Ideally, this patch should be accompanied by b0f64bdab00db652e in
xkeyboard-config.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This change implements the protocol for DRI2GetBuffersWithFormat, but
the bulk of the differences are the changes to the extension / driver
interface to make this function work. The old CreateBuffers and
DeleteBuffers routines are replaced with CreateBuffer and DeleteBuffer
(both singular).
This allows drivers to allocate buffers for a drawable one at a time.
As a result, 3D drivers can now allocate the (fake) front-buffer for a
window only when it is needed. Since 3D drivers only ask for the
front-buffer on demand, the real front-buffer is always created. This
allows CopyRegion impelemenations of SwapBuffers to continue working.
As with previous version of this code, if the client asks for the
front-buffer for a window, we instead give it the fake front-buffer.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
commit 64b7f96dca accidentally inverted the comparison, could
result in crashes on some systems later on.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
This prevents building an older server with a new dri2proto.h from
resulting in a DRI2 extension module that lies about the version it
supports.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Rotation matrix for pointer coordinates was incomplete and pointers with
absolute coordinates did not work correctly in xserver (kdrive) when the
sceen was rotated other than by 0 degrees.
Signed-off-by: David Jander <david.jander@protonic.nl>
Signed-off-by: James Cloos <cloos@jhcloos.com>
Virtually all callers use
XkbGetRulesDefault(&rmlvo);
InitKeyboardDeviceStruct(..., rmlvo);
Let's save them the trouble and accept NULL as a hint to take the
default RMLVO.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
After the call to xf86ActivateDevice, the new device will be added to
inputInfo.devices. However, if the subsequent call to ActivateDevice
fails, the correponding InputInfoRec for the device is deleted but an
entry still remains in inputInfo.devices. This might lead to a server
crash later on (on InitAndStartDevices for instance) when the device
control proc would be called for an invalid device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This happened because we put a byte in the fd to wake up dispatch, but we never actually enqueued anything in mieq because the num_events was 0.
(cherry picked from commit c21ca7558d)
If a front-buffer is requested for a window, add the fake front-buffer
to the list of requested buffers.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Currently no code path exhibits the broken behavior since we only toggle into rootless if we don't have the root.
(cherry picked from commit 970f100ca3)
The changes actually caused all windows to move to the current space. Instead, we're going with a fix entirely within Xplugin that depends on quartz-wm being the window-manager for now.
(cherry picked from commit 997b6f3142)
Otherwise if X11.app was activated with a mouse click, the location of the even is the last location of the cursor before X11 was deactivated
(cherry picked from commit c7457d7b31)