Changed windialogs.c to set icons via window properties rather than class
properties, and use LoadImage() for small icons, because LoadIcon() can only open
large icons. Since this code is redundant across the dialogs, I put it in the
winCenterDialog function, along with a few other redundant instructions, and
renamed in winInitDialog().
Also, don't bogusly put our dialogs at the center of the virtual desktop if we
are on a multimonitor system (this causes the dialog to end up split across two
monitors in a dual-monitor side-by-side setup)
Corrections to use HWND_TOPMOST instead of HWND_TOP and not to use SWP_NOZORDER
from Colin Harrison
fd.o bugzilla #4491
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Enter grabs are checked for in CheckMotion(), each time the sprite window
changes the current grab is deactivated (if applicable) and the new grab is
activated (if applicable). Exception - if the grab is on a parent window of
the current window since we keep the grab across descendants.
Since CheckMotion() may change the grab status of a device, we mustn't get
"dev->deviceGrab.grab" in ProcessOtherEvents until after CheckMotion().
FocusIn grabs are checked in much the same manner.
The event delivery for grabs replaces the NotifyNormal on window change with
a NotifyGrab on window change. Note that this happens before the grab
activates, so the EnterNotify(NotifyGrab) is still delivered to the window,
not to the grabbing client. This is in line with the core protocol semantics
for NotifyGrab events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not having the resource mask set means we never match an existing grab,
hence we never actually ungrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the case of a RevertToFollowKeyboard, the master device should be used
(since this is the closest equivalent to the VCK as before). Only if the
master keyboard is the same as the device, revert to the VCK itself.
This didn't use to be a problem when devices could only be pointers or
keyboards, not both. Nowadays, slave devices may have both buttons and
keyboards, and in this case we don't want to deactivate a passive keyboard
grab when a button release is detected.
The wire layout is [struct xXIEventMask][mask bytes]. So the pointer needs
to not only be advanced by the mask bytes, but also by the size of the
struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We don't return rates to randr < 1.1 clients, so don't allocate space
for them. This fixes a FatalError due to not all allocated space being
used.
X.Org bug#21861 <http://bugs.freedesktop.org/show_bug.cgi?id=21861>
Reported-by: Guillaume Quintin <coincoin169g@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
chdevcur.c:97: warning: ‘SecurityLookupIDByType’ is deprecated (declared at
../include/resource.h:269)
xiproperty.c:200: warning: passing argument 2 of ‘GetEventFilter’ from
incompatible pointer type
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Both may in some cases be called for a SD attached to a master keyboard. In
this case, we need to get the right master device (i.e. the pointer).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's devices (e.g. some barcode readers) that have axes but no buttons.
When such a device sends a motion event, the valuator and button class is
copied into the master pointer (i.e. removing the button class).
So we need a couple of extra sanity checks for the button class to exist.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Copying all classes into the master device has drawbacks for hybrid devices
(devices that are both mice and keyboards). If such a device posts an event,
it's key classes are moved into the VCP. The key event itself is unaffected
by keyboard grabs and the like.
Partial class copying copies depending on the event and copies the classes
into the right master device (i.e. the VCK for key events, the VCP for
pointer events).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hybrid devices (keys + buttons/axes) the attached master device is
generally the wrong one. One shouldn't post a button event through a
keyboard and vice versa.
GetMaster(dev) returns the right master device for the given type needed.
This may be the MD paired with this device's MD.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ChangeDeviceId would actually overwrite the flags field if deviceid wasn't
present. Aside from the event of course not telling which device generated
it in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In ProcXkbGetKbdByName, mrep.firstVModMapKey, .nVModMapKeys and
.totalVModMapKeys were not initialized, contained random values and caused
accesses to unallocated and later modified memory, causing
XkbSizeVirtualModMap and XkbWriteVirtualModMap to see different number of
nonzero values, resulting in writes past the end of an array in XkbSendMap.
This patch initializes those values sensibly and reverts commits 5c0a2088 and
6dd4fc46, which have been plain non-sense.
Signed-off-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A device can only be attached to a single master device. So instead of
looping and searching for the master device, we can just use dev->u.master
directly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
According to the RENDER spec, the origin of the alpha map is
interpreted relative to the origin of the drawable of the image, not
the origin of drawable of the alpha map.
The only use of alpha maps I have been able to find is in Qt and they
don't use a non-zero alpha origin.
Many old monitors zero-fill the detailed descriptors, so check for that
to avoid a useless warning like:
(WW) RADEON(0): Unknown vendor-specific block 0
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This type is only used in XI to give a hint of what type this device may be.
Call it xinput_type for clarity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In ProcXkbGetKbdByName, mrep.firstVModMapKey, .nVModMapKeys and
.totalVModMapKeys were not initialized, contained random values and caused
accesses to unallocated and later modified memory, causing
XkbSizeVirtualModMap and XkbWriteVirtualModMap to see different number of
nonzero values, resulting in writes past the end of an array in XkbSendMap.
This patch initializes those values sensibly and reverts commits 5c0a2088 and
6dd4fc46, which have been plain non-sense.
Signed-off-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device is disabled ("off"), it must not send events to a client.
The driver shouldn't send events in that case anyway, but just to make sure
we simply drop events coming while the device is disabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A device can only be attached to a single master device. So instead of
looping and searching for the master device, we can just use dev->u.master
directly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a proper access mode, and reverse the logic of the return value.
Zero ("Success") is returned on success from the hook calls.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
This way we don't always need to scan over previously allocated areas when
looking for an available one, and there might be less fragmentation.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
At most once per second, under the following circumstances:
* We can't satisfy an offscreen memory allocation, but there seems to be enough
offscreen memory available in total.
or
* The server has been idle for at least 100ms, and there is more than one
available offscreen area.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Commit 987579c930 moves main.c into
into libmain.a to be linked with separately, and updates the various
DDXs to link with libmain.a, except Xwin, which also needs this change.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>