Xephyr wants ctrl+shift to grab the window, but that conflicts with
ctrl+alt+shift key combos. Remember the modifier state on key presses and
releases, if mod1 is pressed, we need ctrl, shift and mod1 released
before we allow a shift-ctrl grab activation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessMouseMotion’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:946:188: error: ‘ephyrCurScreen’ undeclared (first use in this function)
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessButtonPress’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:980:186: error: ‘ephyrCurScreen’ undeclared (first use in this function)
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessButtonRelease’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:1007:186: error: ‘ephyrCurScreen’ undeclared (first use in this function)
Fix ephyr compilation when ./configure'd with --enable-debug after commit
46cf6bf569, some instances of ephyrCurScreen were
not converted to screen->pScreen->myNum.
v2: Don't use a trivial local variable which will be unused when ./configure'd
with --disable-debug
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This patch fixes cursor jumps when there is a grab on the Xephyr window and
the pointer moves outside the window.
So on two side-by-side 640x480 screens, a coordinate of 0/481
triggers KdCursorOffscreen.
If the delta between two screens is 0, they share the same offset for
that dimension. When searching for the new screen, the loop always rules out
the current screen. So we get to the second screen, trigger the conditions
where dy <= 0 and decide that this new screen is the correct one. The result
is that whenever KdCursorOffScreen is called, the pointer jumps to the other
screen.
Change to check for dy < 0 etc. so that the cursor stays on the same screen if
there is no other screen at the target location.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
A multi-head Xephyr instance has the pointer stuck on one screen
because of bad coordinate calculation. The coordinates passed to
GetPointerEvents are per-screen, so the cursor gets stuck on the left-most
screen by default.
Adjust and mark the events as POINTER_DESKTOP, so the DIX
can adjust them accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If a screen size was specified as WxH, the loop returned early and kdOrigin
was never advanced. Thus, screen->origin was always 0 (or whatever was given
at the -origin commandline flag).
If a screen size was given with a bit depth (WxHxD), kdOrigin would always
advance by the current screen, offsetting the next screen.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The fb layer of X can't deal with strides that are not a multiple of
4, so when Xephyr allocates its own framebuffer it should make sure to
align it.
This fixes crashes and rendering corruption when Xephyr runs in a
depth that is different from the host X server and its screen size is
not a multiple of 4 / depth. (This is particularly easy to trigger if
you use the -resizeable option).
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the depth of the Xephyr server matches that of the host X server,
Xephyr simply uses the buffer associated with the XImage as its
framebuffer. In this case, it is correct to get the bits_per_pixel and
bytes_per_line values returned from hostx_screen_init() from the XImage.
However, when the depth doesn't match the host, Xephyr uses a private
framebuffer that is periodically copied to the XImage. In this case,
the returned values of bits_per_pixel and bytes_per_line should be
those of the private framebuffer, not those of the XImage.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
KdScreenInfo is constructed at server startup time, and not
re-generated at server reset time. Freeing the 'driver' element at
reset time means this information is lost, and the server crashes
pretty quickly afterwards.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
pi = ki = 0 here, so not follow them.
Signed-off-by: Strake <strake888@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=69388
Commit c100211034 (dix: only show the cursor
if a window defines one (#58398)) broke the default cursor behaviour in
Xephyr (unless run with -retro). Restore the default cursor visibility
so that '-retro' or '-host-cursor' are not needed to have a visible
cursor.
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
as of ba387cf21f "ephyr: Use host (HW) cursors
by default." this only applies if -sw-cursor is given on the cmdline.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When DEBUG is enabled Xephyr compilation fails:
ephyrdriext.c:343:133: error: 'is_ok' undeclared (first use in this
function)
EPHYR_LOG("leave. is_ok:%d\n", is_ok);
Just reemove bogus is_ok variable.
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no reason not to, and it simplifies quite a few callers.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No DDX overrode this, and we never actually called through that slot
anyway.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
I'm getting a error building xorg-server-1.14.1.902 with thelatest snapshot
of gcc-4.8:
input.c:225:43: error: array subscript is above array bounds
[-Werror=array-bounds]
This is because kdNumInputFds can become equal to KD_MAX_INPUT_FDS in
KdRegisterFd(). This means that in KdUnregisterFd(), kdInputFds[j + 1] can
be beyond the end of the array.
Signed-off-by: Chris Clayton <chris2553@googlemail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Like commit ac1a60e7b6, re-add
initialization of GLX after it was accidentally dropped from non-Xorg
servers in 5f5bbbe543.
Signed-off-by: Sebastien Bacher <seb128@ubuntu.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62346
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Given that the window title says "ctrl+shift", having pressing those
keys in that order not ungrab you is fairly mean.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Otherwise when you're doing the ctrl-shift mouse grab thing, you
don't know what state you're in until the next rendering occurs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Unless you're working on the sw cursor rendering code, you surely want
to have real hardware cursors.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Note that EXTRA_DIST was always unnecessary, because automake notices
conditional compile of source files and includes them.
Copyright header is added because git noted that this was a 61%
rewrite.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
I suspect there's more cleanup possible in ephyrHostXVPutImage() by
sticking a bunch of the args in the port priv earlier.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
This obviously wanted a helper function beforehand, but even more so
now that we have XCB.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Now that we have XCB on the server side, we don't need to split these
functions out.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
No more extra event structure to translate between hostx.c and
ephyr.c!
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
We can include xcb bits from the same place as server headers, so
there's no need to hide them any more.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Now that we can include server headers in talking to host X, we don't
need to hide any more.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
v2: Fix trying to include xcb-dri in the non-dri-build case (Noted by
Julien)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Drop obsolete comments about interaction between Xlib code and that
macro, and stop undefining it.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Require new xcb-xf86dri to get fixed GetDrawableInfo.
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Julien Cristau <jcristau@debian.org>
v2: Massive, conflict-filled rebase. I think I resolved everything
right, but this host xv code makes my eyes bleed. Touch-tested XV
after the rebase (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
v2: Rebase on indentation changes, squash in a simpler variant of the
later event compression patch, fix server hang or segfault on
window close by reimplementing the x_io_error_handler in the new
XCB event loop (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
v2: Dropped the hostx_load_keymap changes, now that that function is
gutted (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
This isn't used anywhere.
v2: Rebase to the top of the patch series (anholt)
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
There's no reason to pass the data back out to the caller, since the
caller was dropping it on the floor. The original data is a CARD32,
so no need to mess with weird unsigned longs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
The only cases that lead to !is_ok are already EPHYR_LOG_ERROR, and it
fixes set-but-unused compiler warnings.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
This is unused as of the introduction of a helper in
e7150db535
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Simplifies code and reduces risk of overflow from converting length
field in X replies from words to bytes.
One call to _XEatData is left in ephyrHostGLXGetStringFromServer where
it's already been checked for overflow, and other values have been
subtracted from it to reduce the size of data remaining to be eaten.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
clientDriverNameLength is a CARD32 and needs to be bounds checked before
adding one to it to come up with the total size to allocate, to avoid
integer overflow leading to underallocation and writing data from the
network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
busIdStringLength is a CARD32 and needs to be bounds checked before adding
one to it to come up with the total size to allocate, to avoid integer
overflow leading to underallocation and writing data from the network past
the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
reply.length & reply.size are CARD32s and need to be bounds checked before
multiplying or adding to come up with the total size to allocate, to avoid
integer overflow leading to underallocation and writing data from the
network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Add support for Amiga-style bitplanes, with 4 or 8 bits per pixel.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Keith Packard <keithp@keithp.com>
Add support for Atari-style interleaved bitplanes, with 2 bytes interleave
and 4 or 8 bits per pixel.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
miCreateDefColormap() only preallocates black and white pixels if
depth > 1.
Hence override the visual, so fbdevCreateColormap() takes care of it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Monochrome supports StaticGray, with hardcoded black and white pixels.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Older frame buffer devices may not fill in fix.line_length, in which
case it must be calculated by the application.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This fixes:
hw/kdrive/fbdev/fbdev.c: In function 'fbdevInitialize':
hw/kdrive/fbdev/fbdev.c:41:25: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
hw/kdrive/fbdev/fbdev.c: In function 'fbdevRandRSetConfig':
hw/kdrive/fbdev/fbdev.c:470:19: warning: variable 'newheight' set but not used [-Wunused-but-set-variable]
hw/kdrive/fbdev/fbdev.c:470:9: warning: variable 'newwidth' set but not used [-Wunused-but-set-variable]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ephyrvideo.c: In function 'ephyrPutVideo':
ephyrvideo.c:1009:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1009:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1009:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1009:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrGetVideo':
ephyrvideo.c:1058:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1058:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1058:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1058:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrPutStill':
ephyrvideo.c:1107:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1107:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1107:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1107:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrGetStill':
ephyrvideo.c:1156:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1156:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1156:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1156:9: warning: variable 'drw_x' set but not used
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
kinput.c: In function 'KdEnqueueKeyboardEvent':
kinput.c:1845:16: warning: variable 'ctrl' set but not used
kinput.c:1844:17: warning: variable 'keyc' set but not used
kinput.c: In function 'KdEnqueuePointerEvent':
kinput.c:1887:12: warning: variable 'ms' set but not used
kxv.c: In function 'KdXVDisable':
kxv.c:1181:19: warning: variable 'ScreenPriv' set but not used
mouse.c: In function 'ps2SkipInit':
mouse.c:444:9: warning: variable 'skipping' set but not used
mouse.c: In function 'ps2Init':
mouse.c:473:10: warning: variable 'waiting' set but not used
mouse.c:472:9: warning: variable 'skipping' set but not used
fbdev.c: In function 'fbdevRandRSetConfig':
fbdev.c:468:19: warning: variable 'newheight' set but not used
fbdev.c:468:9: warning: variable 'newwidth' set but not used
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Use bytes_per_line and bits_per_pixel from the created XImage to fix
https://bugzilla.redhat.com/show_bug.cgi?id=518960
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With this option passed, ephyr windows can be resized like normal
windows on the fly, without the need of an explicit parent window.
Signed-off-by: Daniel Martin <daniel.martin@secunet.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Found by parfait 1.1 code analyser:
Memory leak of pointer 'keymap' allocated with XGetKeyboardMapping(HostX.dpy, min_keycode, ((max_keycode - min_keycode) + 1), &host_width)
at line 861 of hw/kdrive/ephyr/hostx.c in function 'hostx_load_keymap'.
'keymap' allocated at line 845 with XGetKeyboardMapping(HostX.dpy, min_keycode, ((max_keycode - min_keycode) + 1), &host_width).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When Xephyr is embedded into another application (e.g. in xoo), the
input events may come from the parent Window instead of our own. So make
sure we find the host screen in that case as well instead of crashing.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This reverts commit 531785dd74.
The above commit breaks Xephyr option parsing. Andrzej writes:
Xephyr -retro -keybd evdev,,device=/dev/input/event2,xkbrules=evdev,xkbmodel=evdev,xkblayout=pl -mouse evdev,,device=/dev/input/event1 :3
results in:
<snip>
Pointer option key (device=) of value (/dev/input/event1) not assigned!
Kbd option key (device=) of value (/dev/input/event2) not assigned!
Kbd option key (xkbrules=) of value (evdev) not assigned!
Kbd option key (xkbmodel=) of value (evdev) not assigned!
Kbd option key (xkblayout=) of value (pl) not assigned!
<snip>
The effect of the patch is that the "key=value" pairs are parsed in such
a way that the key is added an "equals" sign to it and we end up with
keys like "device=" instead of "device". This in turn has effect on
KdParsePointerOptions and KdParseKbdOptions: the key does not match
any choice presented in the "switch" statement, and so "Pointer/Kbd
option key (...) of value (...) not assigned!" happens, making all
"key=value" options inaccessible to the user. Reverting the patch makes
them available again.
Reference: http://bugs.debian.org/689246
Reported-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Søren Sandmann <ssp@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Similar to how we intercept and pass through CreateContext, also pass
through newer CreateNewContext requests.
Fixes Clutter → Xephyr → VirtualBox.
Signed-off-by: Frederic Plourde <frederic.plourde@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We need to pass these requests through to the host server in the same
way we do glXMakeCurrent. Generalise the existing MakeCurrent
submission into once that will send MakeCurrent, MakeContextCurrent or
MakeCurrentReadSGI, depending on the request and the host server's
capabilities, and add decoding/hijack support for incoming
MakeContextCurrent and MakeCurrentReadSGI requests.
Fixes Clutter → Xephyr → VirtualBox.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Remove more backing store leftovers.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
