All of the null checks here are redundant, you can't get to those paths
unless RANDR's already been initialized. Delete them, and remove the
pointer too.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
If the driver calls xf86HandleColormaps, CMapChangeGamma updates the HW
gamma LUT of all CRTCs via xf86RandR12LoadPalette. However,
xf86RandR12ChangeGamma was then clobbering the gamma LUT of the RandR
1.2 compatibility output's CRTC with the gamma curves computed from the
screen's global gamma values.
Fix this by bailing if xf86RandR12LoadPalette is installed.
Fixes: 02ff0a5d7e "xf86RandR12: Fix XF86VidModeSetGamma triggering a
BadImplementation error"
Noticed when porting this logic to xf86-video-nouveau, and valgrind
complained about conditional jump based on uninitialized data.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Gitlab very kindly exposes the details of the git commit message (among
much else) in the environment. Unfortunately, piglit tries to handle the
environment in non-UTF8-safe ways, which means if the top-of-tree commit
mentions non-ASCII characters (say, in the author's name) then all the
tests fail and so does the pipeline.
Fortunately none of those variables are things our piglit invocation
needs. Since I've failed to rebuild the docker image as yet, just clear
the likely variables from the environment before running piglit.
This-makes-me: ☹
Believe it or not, somehow we've never done this in legacy mode! We
currently simply change the DPMS property on the CRTC's output's
respective DRM connector, but this means that we're just setting the
CRTC as inactive-not disabled. From the perspective of the kernel, this
means that any shared resources used by the CRTC are still in use.
This can cause problems for drivers that are not yet fully atomic,
despite using the atomic helpers internally. For instance: if CRTC-1 and
CRTC-2 are still enabled and use shared resources within the kernel (an
MST topology, for example), and then userspace tries to go enable CRTC-3
on the same topology this might suddenly fail if CRTC-3 needs the shared
resources CRTC-1 and CRTC-2 are using. While I don't know of any
situations in the mainline kernel that actually trigger this, future
plans for reworking the atomic check of MST drivers are absolutely
going to make this into a real issue (they already are in my WIP
branches for the kernel).
So: actually do the right thing here and disable CRTCs when they're not
going to be used anymore, even in legacy mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Some Broadcom set-top-box boards have PCI busses, but the GPU is still
probed through DT. We would dereference a null busid here in that
case.
Signed-off-by: Eric Anholt <eric@anholt.net>
Lifted from vfb. xfree86 had almost the same thing but unparameterized,
port it to the vfb style.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Could cause privilege elevation and/or arbitrary files overwrite, when
the X server is running with elevated privileges (ie when Xorg is
installed with the setuid bit set and started by a non-root user).
CVE-2018-14665
Issue reported by Narendra Shinde and Red Hat.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
At the point where xf86BusProbe runs we haven't yet taken our own VT,
which means we can't perform drm "master" operations on the device. This
is tragic, because we need master to fish the bus id string out of the
kernel, which we can only do after drmSetInterfaceVersion, which for
some reason stores that string on the device not the file handle and
thus needs master access.
Fortunately we know the format of the busid string, and it happens to
almost be the same as the ID_PATH variable from udev. Use that instead
and stop calling drmSetInterfaceVersion.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the X server is terminated while its VT is not active, it should
not change the current VT.
v2: Query current state in xf86CloseConsole using VT_GETSTATE instead of
keeping track in xf86VTEnter/xf86VTLeave/etc.
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No supported driver supports 1bpp anymore, nor has in a very long time.
This option only worked with vgahw anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
I don't think this is useful information to have in the log, and it's
a bunch of autotools and meson logic to produce it.
Signed-off-by: Eric Anholt <eric@anholt.net>
60ec8ead broke the autotools build:
sdksyms.o:(.data+0x58): undefined reference to `InitConnectionLimits'
sdksyms.o:(.data+0x2ec8): undefined reference to `xf86ServerName'
collect2: error: ld returned 1 exit status
Makefile:811: recipe for target 'Xorg' failed
Likewise 3a4d7c79 for InitConnectionLimits.
Signed-off-by: Adam Jackson <ajax@redhat.com>
If it's really this important we should just do it and not complain. We
never do it so it must not matter.
Signed-off-by: Adam Jackson <ajax@redhat.com>
I'm sure printing the address of function pointers in modules you'd
loaded might have made sense back when we rolled our own dlopen, but we
got better.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The old code would not in fact validate the option value, though it
might complain about it in the log. It also didn't let you set some
legal values that the -maxclients command line option would.
Signed-off-by: Adam Jackson <ajax@redhat.com>
DGAShutdown() walks every screen and attempts to reset the mode. That's
maybe a reasonable thing to do, although the explicit loop is certainly
a bad smell.
In ddxGiveUp it's called after we've torn down the vga arbiter - and in
fact most of the rest of screen state - which is... very very bad. The
other place it's called is from the Control-Alt-BackSpace handler, where
we don't even attempt to do vga arb setup, and where in any case we're
going to escape the main loop eventually anyway.
Move all that cleanup work inside DGACloseScreen. This means it happens
earlier in server teardown than previously, but not in a way you're ever
going to be upset about.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The X will be crashed on the system with other DDX driver,
such as amdgpu.
show the log like:
randr: falling back to unsynchronized pixmap sharing
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e)
(EE) 1: /usr/lib/xorg/Xorg (0x55cb0151a000+0x1b5ce9)
(EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f1587a1d000+0x11390)
(EE)
(EE) Segmentation fault at address 0x0
(EE)
The issue is that modesetting as the master, and amdgpu as the slave.
Thus, when the master attempts to access pSlavePixPriv in ms_dirty_update(),
problems result due to the fact that it's accessing AMD's 'ppriv' using the
modesetting structure definition.
Apart from fixing crash issue, the patch fix other issue in master interface
in which driver should refer to master pixmap.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Goins <agoins@nvidia.com>
This makes us match the featureset of autotools, and also fixes the
non-Linux default value to match.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
I don't have a BSD to test on, but this should do the same as what
autotools did.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have pm_noop.c being built most of the time for the
no-OS-PM case, so just switch to always using it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of having every video driver loop over any pending leases to
free them during CloseScreen, do this up in the DIX layer by
terminating leases when a leased CRTC or Output is destroyed and
(just to make sure), also terminating leases in RRCloseScreen. The
latter should "never" get invoked as any lease should be associated
with a resource which was destroyed.
This is required as by the time the driver's CloseScreen function is
invoked, we've already freed all of the DIX randr structures and no
longer have any way to reference the leases
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
Cc: Thomas Hellstrom <thellstrom@vmware.com>
The recent rewrite of modesetting driver broke the 24bpp support.
As typically found on cirrus KMS, it leads to a blank screen, spewing
the error like:
failed to add fb -22
(EE) modeset(0): failed to set mode: Invalid argument
The culript is that the wrong bpp value of the front buffer is passed
to drmModeAddFB(). Fix it by replacing with the back buffer bpp,
drmmode->kbpp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When setting DefaultDepth to 16 in the Screen section, the current
code requests a 32 bpp framebuffer, however the X-Server seems to
assumes 16 bpp.
Fixes commit 21217d0216 ("modesetting: Implement 32->24 bpp
conversion in shadow update")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
If we're using atomic modesetting, then we're also using universal
planes, and so the lease we create needs to include the plane.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
