Removes the last cpp conditional on ROOTLESS from dix code.
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Also remove vidmodeproc.h from the SDK since no drivers are using it.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pixel is CARD32, so inside the server has type unsigned int (x86_64) or unsigned
long (x86)
Cast to unsigned int and use a %u format
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Some Win32 API types are different fundamental types in the 32-bit and 64-bit
This problem is then further compounded by the fact that whilst both 32-bit
Cygwin and 32-bit MinGW use the ILP32 data model, 64-bit MinGW uses the LLP64
data model, but 64-bit Cygwin uses the LP64 data model.
This makes it impossible to write printf format specifiers which are correct for
all those targets, so we use some macros to provide the correct specifier for
the target.
LPARAM and WPARAM are integer types which can contain a pointer
LPARAM is long in ILP32 and long long in LLP64
WPARAM is unsigned int in ILP32 and unsigned long long in LLP64
Generally, these are just used to passs integer parameters, so for simplicity,
cast to int and use an int-compatible format
In the specific case of WM_CHANGECBCHAIN, they are used to pass HWND, so cast to
that type and print using an appropriate format.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Some Win32 API types are different fundamental types in the 32-bit and 64-bit
versions.
This problem is then further compounded by the fact that whilst both 32-bit
Cygwin and 32-bit MinGW use the ILP32 data model, 64-bit MinGW uses the LLP64
data model, but 64-bit Cygwin uses the LP64 data model.
This makes it impossible to write printf format specifiers which are correct for
all those targets
In the Win32 API, DWORD is an signed, 32-bit type. It is defined in terms of a
long, except in the LP64 data model, where it is an int.
It should always be safe to cast it to int and use %d.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Some Win32 API types are different fundamental types in the 32-bit and 64-bit
versions.
This problem is then further compounded by the fact that whilst both 32-bit
Cygwin and 32-bit MinGW use the ILP32 data model, 64-bit MinGW uses the LLP64
data model, but 64-bit Cygwin uses the LP64 data model.
This makes it impossible to write printf format specifiers which are correct for
all those targets
In the Win32 API, DWORD is an unsigned, 32-bit type. It is defined in terms of
an unsigned long, except in the LP64 data model, where it is an unsigned int.
It should always be safe to cast it to unsigned int and use %u or %x.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Window and Atom types derive from XID, which is always unsigned long in client
code, so use %ld format specifier
XTextProperty.nitems is of type unsigned long, so use %lu format specifier
ulReturnBytesLeft is of type unsigned long, so use %lu format specifier
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
remainingTime is computed as a long int, so use %ld format specifier
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
serverGeneration is of type unsigned long, so use %lu format specifier
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
struct winInfoRec.keyboard members are of type long, not type int
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
XID inside the server has type unsigned int (x86_64) or unsigned long (x86)
Follow the example of the rest of the server and cast to unsigned int and use
a %u or %x format.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
HWND derives from HANDLE, a pointer type, so we should use the %p format
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The use of %d format for the DWORD return value of GetTickCount() isn't
portable, but it doesn't seem to be worth fixing it when this information isn't
very useful (and is redundant to the timestamping of log messages we now have)
Instead just remove these uses of GetTickCount()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This fixes modesetting when glamor is disabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Based on code by Keith Packard, Eric Anholt, and Jason Ekstrand.
v2:
- Fix double free and flip_count underrun (caught by Mario Kleiner).
- Don't leak flip_vblank_event on the error_out path (Mario).
- Use the updated ms_flush_drm_events API (Mario, Ken).
v3: Hack around DPMS shenanigans. If all monitors are DPMS off, then
there is no active framebuffer; attempting to pageflip will hit the
error_undo paths, causing us to drmModeRmFB with no framebuffer,
which confuses the kernel into doing full modesets and generally
breaks things. To avoid this, make ms_present_check_flip check that
some CRTCs are enabled and DPMS on. This is an ugly hack that would
get better with atomic modesetting, or some core Present work.
v4:
- Don't do pageflipping if CRTCs are rotated (caught by Jason Ekstrand).
- Make pageflipping optional (Option "PageFlip" in xorg.conf.d), but
enabled by default.
v5: Initialize num_crtcs_on to 0 (caught by Michel Dänzer).
[airlied: took over]
v6: merge async flip support from Mario Kleiner
free sequence after failed vblank queue
handle unflip while DPMS'ed off (Michel)
move flip tracking into its own structure, and
fix up reference counting issues, and add comments.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Since we are shipped with the server and the server has it built-in,
don't bother trying to load it.
Don't remove or invert the if statement on purpose as a later
patch adds stuff in here.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a specialization of ms_drm_abort that matches based on the drm
event queue's sequence number.
Based on code by Keith Packard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
I want to use this in present.c.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, ms_flush_drm_events() returned a boolean value, and it was
very easy to interpret the meaning incorrectly. Now, we return an
integer value.
The possible outcomes of this call are:
- poll() raised an error (formerly TRUE, now -1 - poll's return value)
- poll() said there are no events (formerly TRUE, now 0).
- drmHandleEvent() raised an error (formerly FALSE, now the negative
value returned by drmHandleEvent).
- An event was successfully handled (formerly TRUE, now 1).
The nice part is that this allows you to distinguish errors (< 0),
nothing to do (= 0), and success (1). We no longer conflate errors
with success.
v2: Change ms_present_queue_vblank to < 0 instead of <= 0, fixing an
unintentional behavior change. libdrm may return EBUSY if it's
received EINTR for more than a second straight; just keep retrying
in that case. Suggested by Jasper St. Pierre.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This adds support for reverse prime to the modesetting driver.
Reverse prime is where we have two GPUs in the display chain,
but the second GPU can't scanout from the shared pixmap, so needs
an extra copy to the on screen pixmap.
This allows modesetting to support this scenario while still
supporting the USB offload one.
v1.1:
fix comment + ret = bits (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows a glamor enabled master device to have
slave USB devices attached.
Tested with modesetting on SNB + USB.
It relies on the previous patch to export linear
buffers from glamor.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need this for doing USB offload scenarios using glamor
and modesetting driver.
unfortunately only gbm in mesa 10.6 has support for the
linear API.
v1.1: fix bad define
v2: update the configure.ac test as per amdgpu. (Michel)
set linear bos to external to avoid cache. (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel pointed out I broke Zaphod with the initial auto add
gpu devices change,
Fix this, by only auto adding GPU devices if we are screen 0
and there are no other screens in the layout. Anyone who
wants to assign GPU devices can specify it in the xorg.conf
for this use case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Xwayland opens anonymous files for its sharing buffers, move these
file descriptors out of the range of the client select mask to avoid
reaching the maximum number of clients prematurely.
https://bugs.freedesktop.org/show_bug.cgi?id=91072
Tested-by: Olivier Fourdan <fourdan@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Right now, Xorg does not install DBus matches for "PauseDevice" /
"ResumeDevice". Therefore, it should usually not receive those DBus
signals from logind. It is just a coincidence that systemd-logind sends
those signals in a directed manner right now. Therefore, dbus-daemon
bypasses the broadcast matches.
However, this is not ABI and Xorg should not rely on this. systemd-logind
is free to send those signals as broadcasts, in which case Xorg will
freeze the VT. Fix this by always installing those matches.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Reported-by: Jan Alexander Steffens <jan.steffens@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit fixes a small mistake in Xorg.wrap.1 .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
X11Controller.m:417:17: error: address of function 'asl_log_descriptor' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion,Value Conversion Issue]
if (asl_log_descriptor) {
~~ ^~~~~~~~~~~~~~~~~~
X11Controller.m:417:17: note: prefix with the address-of operator to silence this warning [Semantic Issue]
if (asl_log_descriptor) {
^
&
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
linux_parse_vt_settings() was split out of xf86OpenConsole so that it can
be called earlier during systemd-logind init, but it is possible to run
the xserver in such a way that xf86OpenConsole() is never used.
The FatalError calls in linux_parse_vt_settings() may stop the Xorg xserver
from working when e.g. no /dev/tty0 is present in such a setup.
This commit adds a may_fail parameter to linux_parse_vt_settings() which
can be used to make linux_parse_vt_settings() fail silenty with an error
return in this case, rather then calling FatalError().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights on any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
But the final KeepTty value is not known until the code to chose which vtno to
run on has been called, which currently happens after intializing
systemd-logind.
This commit is step 1 in fixing the "startx -- vt7" breakage, it factors out
the linux xf86OpenConsole bits which set xf86Info.vtno and keepTty so that
these can be called earlier. Calling this earlier is safe as this code has
no side effects other than setting xf86Info.vtno and keepTty.
Note this basically only moves a large chunk of xf86OpenConsole() into
linux_parse_vt_settings() without changing a single line of it, this is
hard to see in the diff because the identation level has changed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In some extreme cases with animated cursors at a high frame rate we
could end up filling the wl_display outgoing buffer and end up with
wl_display_flush() failing.
In any case, using the frame callback to throttle ourselves is the
right thing to do.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Right now if "-auth" isn't passed on the command line, we let
any user on the system connect to the Xwayland server.
That's clearly suboptimal, given Xwayland is generally designed
to be used by one user at a time.
This commit changes the behavior, so only the user who started the
X server can connect clients to it.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xwayland currently allows wide-open access to the X sockets
it listens on, ignoring Xauth access control.
This commit makes sure to enable access control on the sockets,
so one user can't snoop on another user's X-over-wayland
applications.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If present, access the unaccelerated valuator mask values for DGA and XI2 raw
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The image is created in the native byte order of the machine Xephyr is
rendered on however drawn in the image byte order of the Xephyr server.
Correct byte order in the xcb_image_t structure and convert to native
before updating the window.
If depths of Xephyr and host server differ this is already taken care of
by the depth conversion routine.
It is a terrible wase to always convert and transmit the entire image
no matter of the size of the damaged area. One should probably use
sub-images here. For now we leave this as an exercise.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xcb_image_put() prints the entire image, therefore don't use an offset.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The DDX specific command line parsing function only gets called
if command line arguments are present. Therefore this function
is not suitable to initialize mandatory global variables.
Replace main() instead.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes mmap failures with 32-bit builds.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix missing newlines from error string and fix grammar.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The code in drmmode_set_cursor does not properly handle the case where
drmModeSetCursor2 returns any other error than EINVAL and silently fails to set
a cursor.
So only return when the drmModeSetCursor2 succeeds (i.e returns 0) and disable
the cursor2 usage on EINVAL.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1205725
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't even need to simulate button clicks; it's done automatically.
This also fixes scrolling in Qt5 apps.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If no compat_output is defined, we inadvertently (attempt to) return
whatever data is at index -1. Instead, return NULL since that's what
callers are expecting.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Fix missing newlines from error string and fix grammar.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This adds tiling support to the server modesetting driver,
it retrieves the tile info from the kernel and translates
it into the server format and exposes the property.
v2.1: fix resetting tile property (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is ported from the same code in the ati and intel drivers,
It uses the same option name as nvidia and the other DDXes to
disable tearing down outputs as it is hard to avoid racing with clients.
v2: address two issues with DeleteUnusedDP12 enabled, reported
by Daniel Martin,
a) check we have a mode_output before destroying it
b) only delete *unused* displays (thanks Aaron for clarifying)
so we check if the output has a crtc and if it does we don't
delete it.
v3: drop the option to delete unused displays, just encode
behaviour into the randr spec.
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to cache the mode resources and with dynamic
connectors for mst support we don't want to. So first clean that
up before adding dynamic connector support.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This creates an automatic monitor for a tiled monitor at startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the tiles of the monitor in the right place at
X server startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change the X server default to do right-of placement
at startup. This gives an option to allow drivers to
override this placement, which has been used for server
drivers where both heads are not in the same physical
place.
Been in Fedora for a few years, but for tiled monitors
we really want something along these lines.
This is an ABI break.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows us to skip the screen section, the first
Device section will get assigned to the screen,
any remaining ones will get assigned to the GPUDevice
sections for the screen.
v2: fix the skipping unsuitable screen logic (Aaron)
v3: fix segfault if not conf file (me, 5s after sending v2)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows gpu devices to be specified in xorg.conf Screen sections.
Section "Device"
Driver "intel"
Identifier "intel0"
Option "AccelMethod" "uxa"
EndSection
Section "Device"
Driver "modesetting"
Identifier "usb0"
EndSection
Section "Screen"
Identifier "screen"
Device "intel0"
GPUDevice "usb0"
EndSection
This should allow for easier tweaking of driver options which
currently mess up the GPU device discovery process.
v2: add error handling for more than 4 devices, (Emil)
fixup CONF_ defines to consistency
add MAX_GPUDEVICES define
(yes there is two defines, this is consistent
with everywhere else).
remove braces around slp (Mark Kettenis)
man page fixups (Aaron)
v2.1: fixup whitespace (Aaron)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Include the wrapped windows.h via X11/Xwindows.h before xcb_keysyms.h to avoid
type clashes caused by the unwrapped windows.h that includes.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Link xwinclip with -lpthread to fix build for MinGW
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The xnfcalloc() macro took two arguments but simply multiplied them
together without checking for overflow and defeating any overflow
checking that calloc() might have done. Let's not do that.
The original XNFcalloc() function is left for now to preserve driver
ABI, but is marked as deprecated so it can be removed in a future round
of ABI break/cleanup.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It's going to multiply anyway, so if we have non-constant values, might
as well let it do the multiplication instead of adding another multiply,
and good versions of calloc will check for & avoid overflow in the process.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Modern Solaris releases provide this functionality in the OS via the
xsvc driver. Since the move to libpciaccess, nothing in Xorg uses
this aperture driver any more.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
At the moment, the X server uses a non-default timeout for D-Bus
messages to systemd-logind. The only timeouts normally used with
D-Bus are:
1) Infinite
2) Default
Anything else is just as arbitrary as Default, and so rarely makes
sense to use instead of Default.
Put another way, there's little reason to be fault tolerant against
a local root running daemon (logind), that in some configurations, the
X server already depends on for proper functionality.
This commit changes systemd-logind to just use the default timeouts.
Downstream-bug: https://bugzilla.redhat.com/show_bug.cgi?id=1209347
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
It's possible to receive a message reply in the message filter if a
previous message call timed out locally before the reply arrived.
The message_filter function only handles signals, at the moment, and
does not properly handle message replies.
This commit changes the message_filter function to filter out all
non-signal messages, including spurious message replies.
Downstream-bug: https://bugzilla.redhat.com/show_bug.cgi?id=1209347
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Non serverfd input devices will never get a systemd-logind dbus resume signal,
causing them to never get re-enabled.
This commit changes xf86VTEnter() to enable them immediately, fixing this.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=89756
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86platformProbeDev creates GPU screens for any platform devices that were not
matched by a GDev in the loop above, but only if there was at least one device.
This means that it's impossible to configure a device as a GPU screen if there
is only one platform device that matches that driver.
Instead, create a GPU screen (if possible) for any platform device that was not
claimed by the GDev loop.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
If a PCI entity is found, xf86_check_platform_slot performs a device ID check
against the xf86_platform_device passed in. However, it just returns
immediately without checking the rest of the entities first. This leads to this
situation happening:
1. The nvidia driver creates an entity 0 with bus.type == BUS_PCI
2. The intel driver creates entity 1 for its platform device, opening
/dev/dri/card0
3. xf86platformProbeDev calls probeSingleDevice on the Intel platform device,
which calls doPlatformProbe, which calls xf86_check_platform_slot.
4. xf86_check_platform_slot compares the Intel platform device against the
NVIDIA PCI entity. Since they don't have the same device ID, it returns
TRUE.
5. doPlatformProbe calls xf86ClaimPlatformSlot, which creates a duplicate entity
for the Intel one.
Fix this by only returning FALSE if the PCI ID matches, and continuing the loop
otherwise. In the scenario above, this allows it to continue on to find the
Intel platform device that matches the second entity.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Fix XQuartz build since commit e036cbfc "Make PseudoramiXExtensionInit()
prototype more generally available"
Add #include "nonsdk_extinit.h" to xprScreen.c
Add #include "nonsdk_extinit.h" to miinitext.c under INXQUARTZ to provide
declarations used under INXQUARTZ
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add support for drivers to set the tiling
property. This is used by clients to
work out the monitor tiles for DisplayID
monitors.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
ephyr_glamor_connect() returns NULL if we failed, but applying
xcb_connection_has_error() to NULL is not permitted.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
By dropping the unconditional logic op disable at the end of
rendering, this fixes GL errors being thrown in GLES2 contexts (which
don't have logic ops). On desktop, this also means a little less
overhead per draw call from taking one less trip through the
glEnable/glDisable switch statement of doom in Mesa.
The exchange here is that we end up taking a trip through it in the
XV, Render, and gradient-generation paths. If the glEnable() is
actually costly, we should probably cache our logic op state in our
screen, since there's no way the GL could make that switch statement
as cheap as the caller caching it would be.
v2: Don't forget to set the logic op in Xephyr's drawing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Remove these defines as we start to remove support for non-standard
glamor layering as used by the intel driver.
v2: Rebase on the blockhandler change and the Xephyr init failure
change (by anholt), fix stray NO_DRI3 addition to xwayland.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
So that Xwayland gets re-linked each time glamor is modified.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Report OS version in log
Report if WoW64 is in use
Manifest for compatbility with Windows versions, so we don't get lied to by GetVersionEx()
Also, make the description in the manifest a bit more generic
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Maybe a long time ago this made some kind of sense, but now there's no good
reason to ever use this, rather than the Shadow DirectDraw NonLocking engine.
Also remove screen private data members used by other removed engines.
Also remove no longer needed OS version check in winDetectSupportedEngines()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Update man page to document pseudo-xinerama
v2: Make the use of PseudoramiXExtensionInit() match the prototype
v3: Update for nonsdk_extinit.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Make PseudoramiXExtensionInit() prototype available to hw/xwin
Rather than avoiding a reference to it being pulled in to Xorg by sdksyms by
hiding this prototype behind the INXQUARTZ define, which is only defined when
building Xquartz, introduce nonsdk_extinit.h and move it there.
(The only remaining use of INXQUARTZ is in mi/miiniext.c, in order
to do PseudoramiXExtensionInit() at the point apparently needed by Xquartz)
Also remove duplicate declaration of noPseudoramiXExtension from pseudoramiX.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Turn on -hostintitle by default
Provide -nohostintitle to disable if needed
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Improve the parsing of the <proto> XML element
Include all text from the param element, in the order it appears in the xml
document, as part of the formal parameter declaration
This is needed to correctly handle the XML description added in svn r27498 of
glPathGlyphIndexRangeNV()'s baseAndCount parameter of type GLuint[2]
This fixes the way the parameter declaration is generated so it is in the
correct form 'GLuint baseAndCount_[2]' and not 'GLuint baseAndCount[2]_'
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Factor out duplicated code used in parsing of the <proto> XML element in the
code generator
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
ephyr_glamor_connect() returns NULL if we failed, but applying
xcb_connection_has_error() to NULL is not permitted.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
pci_device_map_legacy returns 0 on success.
Signed-off-by: Jürg Billeter <j@bitron.ch>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Gcc5 adds additional lines stating line numbers before and
after __attribute__() which need to be skipped.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Tested-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Currently when the ddx does not set any driver name we set DRI2 driver but
not the VDPAU driver name. The result is that VDPAU drivers will not get found
by libvdpau when the modesetting driver is being used.
Just assume that the VDPAU driver matches the DRI2 driver name, this is true
for nouveau, r300, r600 and radeonsi i.e all VDPAU drivers currently supported
by mesa.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
All of our checks for what crtc we are on take rotation into account so we
select the correct crtc. The only problem is that we weren't returning it
we were rotated. This caused X to think DRI3 apps were not on any crtc and
limit them to 1 FPS.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This replaces the stubs for shadow buffer creation/allocation with actual
functions and adds a shadow_destroy function. With this, we actually get
shadow buffers and RandR now works properly. Most of this is copied from
the xf86-video-intel driver and modified for modesetting.
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Fix build with --disable-glamor
- Set the pixel data pointer in the pixmap header for dumb shadow bo's
- Call drmmode_create_bo with the right bpp
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Make shadow buffers per-crtc and leave shadow_enable alone
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The original drmmode_glamor_new_screen_pixmap function was specific to the
primary screen pixmap. This commit pulls the guts out into a new, more
general, drmmode_set_pixmap_bo function for setting a buffer on a pixmap.
The new function also properly tears down the glamor bits if the buffer
being set is NULL. The drmmode_glamor_new_screen_pixmap function is now
just a 3-line wrapper around drmmode_set_pixmap_bo.
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Re-arranged code in drmmode_set_pixmap_bo and
drmmode_glamor_handle_new_screen_pixmap so that glamor_set_screen_pixmap
only gets called for the screen pixmap
- Guard the call to glamor_set_screen_pixmapa with a drmmode->glamor check
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As a DDX may declare offload support without supporting DRI2
(because it is using an alternative acceleration mechanism like DRI3),
when iterating the list of offload_source Screens to find a matching
DRI2 provider we need to check before assuming it is DRI2 capable.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88514
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Carlos Olmedo Escobar <carlos.olmedo.e@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the BlockHandler chain is modified while it is active, we need to
re-fetch the current value and store it in our private for use the
next time through.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
glEGLImageTargetTexture2DOES only set the first level.
Mesa handles this new texture as incomplete and renders a black screen.
We also want to prevent linear filtering.
https://bugs.freedesktop.org/show_bug.cgi?id=81800
Signed-off-by: Markus Wick <markus@selfnet.de>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In the new KMS APIs, the legacy drmModeSetCursor ioctl actually waits
for a vblank after changing the cursor image before returning, meaning
that the X server, in attempting to hide the cursor before updating
its image, actually makes that hide *visible* for a full vblank.
It's unknown why the X server does this by default, but turn it off.
If we're with a legacy driver that doesn't support the modern
drmModeSetCursor by waiting for a vblank before returning, we're going
to get a tiny bit of tearing on the cursor plane. But between tearing
with a new cursor image and tearing with a blank cursor image, I'd
rather the former.
The only proper solution to this is an atomic ioctl that page flips
all planes, including the cursor plane, at vblank time and at the same
time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In Xnest or Xephyr, pressing CapsLock when focus is on another
window does not update the state in the nested X server.
This is because when synchronizing the lock modifier, sending a
keypress or a key release only is not sufficient to toggle the state,
unlike regular modifiers, one has to emulate a full press/release
to lock or unlock the modifier.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland Makefile explicitely set its dependencies on
WAYLAND_LIBS. If the ibrairies are installed in a non-standard
path, WAYLAND_LIBS contains '-L/path/to/the/lib' which will fail
at build time with:
"No rule to make target '-L/path/to/the/lib', needed by 'Xwayland'.
Stop"
Remove that explicit dependency to avoid the problem (LDADD ought
to be enough to get the right libraries linked).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the suid wrapper is enabled, /usr/bin/Xorg is just a shell script that
execs either /usr/libexec/Xorg.bin directly or the Xorg.wrap binary which then
execve's /usr/libexec/Xorg.bin.
Either way, we end up with Xorg.bin, which is problematic for two reasons:
* ps shows the command as Xorg.bin
* _COMM and _EXE in systemd's journal will both show Xorg.bin as well
There's not much we can do about the path, but having the actual command stay
as Xorg means better compatibility to existing scripts. And, the reason for
this path: the command
journalctl _COMM=Xorg
works universally, regardless of whether the wrapper is used or not.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Xephyr's pseudocolor emulation added in:
commit 81a3b6fe27
Author: Matthew Allum <breakfast@10.am>
Date: Mon Nov 8 22:39:47 2004 +0000
Add support to Xephyr for lower depths than hosts
only tracks one global colormap for the whole (Xephyr) display. Move
this to per-screen state so each screen's colormap can be correct.
[ajax: rebased to 1.17, cleaned up commit message]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michele Baldessari <michele@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
present.c: In function 'ms_present_flush':
present.c:204:9: error: implicit declaration of function
'glamor_block_handler'
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87858
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
modesetting hooked up vblank support for DRI2, but was missing support
for vblanks in Present.
This is mostly copy and pasted from Keith's code in the intel driver.
v2: Use ms_crtc_msc_to_kernel_msc in ms_present_queue_vblank to hook
up the vblank_offset workaround for bogus MSC values (which the
DRI2 code already did).
Also simplify the ms_present_get_crtc function. vblank.c already
implements the functionality; we just need to convert types.
v3: Fix ms_flush_drm_events return code. I'd copied code where 0 meant
success into a function that returned a boolean, so the return code
was always backwards.
Also add DebugPresent calls in ms_present_vblank_{handler,abort}.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We basically want it throughout the driver.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
crtc->enabled is insufficient; we should also make sure DPMS is on.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't want to try to vblank synchronize to monitors which are off.
In order to handle that properly, we need to know the CRTC's DPMS mode.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently, the indexes are off by 4 because of the scroll buttons.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Call drmModeDirtyFB and check the return value to detect whether the
driver support for damage tracking is present, only initialize it in
that case.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
dispatch_dirty_region was only returning -EINVAL error codes,
otherwise it would return 0. The kernel returns -ENOSYS when the
driver doesn't support damage tracking, so dispatch_dirty would never
see the error and never disable damage tracking.
Pass all errors back from dispatch_dirty_region and let dispatch_dirty
deal with them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Gets rid of gcc 4.8 warnings:
xf86AutoConfig.c:211:9: warning: nested extern declaration of
'xf86SolarisFbDev' [-Wnested-externs]
sun_VTsw.c:44:1: warning: no previous prototype for 'xf86VTRelease'
[-Wmissing-prototypes]
sun_VTsw.c:59:1: warning: no previous prototype for 'xf86VTAcquire'
[-Wmissing-prototypes]
and ensures caller & definition stay in sync.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This just calls the existing function to create the relevant Xv
adaptor and hook it up.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>