The address retrieved in "pip.start_ip" is not necessarily the same
address as unw_get_proc_name finds as nearest symbol and returns in "off".
Therefore using "pip.start_ip + off" is not reliable, at least
visible in the binaries from the Debian repository.
Bug-Debian: https://bugs.debian.org/971088
Signed-off-by: Bernhard Übelacker <bernhardu@mailbox.org>
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
This is useful for mock input drivers that control the server in
integration tests. Given that input submission happens on a different
thread than processing, it's otherwise impossible for the driver to
synchronize with the completion of the processing of submitted events.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
The EGLStream backend keeps a queue of pending streams for each Xwayland
window.
However, when this pending queue is freed, the corresponding private
data may not be cleared (typically if the pixmap for this window has
changed before the compositor finished attaching the consumer for the
window's pixmap's original eglstream), leading to a use-after-free and a
crash when trying to use that data as the window pixmap.
Make sure to clear the private data when the pending stream is freed.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1055
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Karol Szuster <karolsz9898@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using multiple window buffers crashes with EGLStream, which does not
need it anyway as this is handled through EGL directly.
Add a flag to the EGL backend to indicate whether it would benefit from
multiple buffers and use this in the get_buffer() function.
Thanks to Adam Jackson <ajax@redhat.com> for pointing out that issue
with EGLStream.
v2: Fix logical test (Adam Jackson <ajax@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The present flip does not work with the EGLStream backend. Similarly,
the EGLStream backend does not require the buffer to be flushed as
eglSwapBuffers() should take care of this.
Instead of actually checking the backend in use in the present code,
add a flag in the form of a bitfield to the EGL backend to indicate
its features and requirements.
This should not introduce any functional change.
v2: Fix logical test (Adam Jackson <ajax@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Major/minor numbers are a.. major (ha) source of pain in FreeBSD porting.
In this case, Xwayland was thinking that /dev/dri/card0 is already a render node,
because the st_rdev on FreeBSD was passing the Linux-style check,
and because of the assumption, acceleration would fail because
various ioctls like AMDGPU_INFO would be denied on the non-render node.
Switch to libdrm's function that already works correctly on all platforms.
Signed-off-by: Greg V <greg@unrelenting.technology>
Reviewed-by: Emmanuel Vadot <manu@FreeBSD.org>
Fetch VariableRefresh option value from X conf file for
modesetting backend DDX driver. This option defaults to false,
and must be set to "true" in conf file for variable refresh
support in the DDX driver.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Window wrappers gets the notification when the window
properties changes. These wrappers are mainly used to
keep track of per-window _VARIABLE_REFRESH property values.
These changes have been ported from AMDGPU
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
These changes have been ported from AMD GPU DDX driver.
This patch adds support for setting the CRTC variable refresh property
for suitable windows flipping via the Present extension.
In order for a window to be suitable for variable refresh it must have
the _VARIABLE_REFRESH property set by the MESA and inform Modesetting
DDX driver with window property updates.
Then the window must pass the checks required to be suitable for
Present extension flips - it must cover the entire X screen and no
other window may already be flipping. And also DRM connector should
be VRR capable.
With these conditions met every CRTC for the X screen will have their
variable refresh property set to true.
Kernel Changes to support this feature in I915 driver is under development.
Tested with DOTA2, Xonotic and custom GLX apps.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
present_wnmd_toplvl_pixmap_window returns a window with the same window
pixmap, so the check could never fail.
Reviewed-by: Roman Gilg <subdiff@gmail.com>
We can only flip if the window pixmap matches that of the toplevel
window. Doing so regardless could cause the toplevel window pixmap to
get destroyed while it was still referenced by the window, resulting in
use-after-free and likely a crash.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1033
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Noticed this was missing while working on the following fix.
v2:
* Dropped present_wnmd_can_window_flip hunk (that function is never
called, will be cleaned up in a follow-up MR).
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com> # v1
Reviewed-by: Roman Gilg <subdiff@gmail.com>
The need_rotate variable is only used once anymore and had semantics which lead
to errors in the past. In particular when negated we are dealing with a double
negation.
The variable gets replaced with a simple check on the xdg-output directly.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
This reverts commit 427f8bc009.
When receiving an output update for the mode size we need to rotate the stored
width and height values if and only if we have an xdg-output for this output
since in this case the stored values describe the output's size in logical
space, i.e. rotated.
The here reverted commit made a code change with which we would not rotate though
when an xdg-output was available since in this case the need_rotate variable was
set to False what caused in the check afterwards the first branch to execute.
That is just a small style-change to the output_get_new_size function. The
function before did take first the height and then the width argument, what
is unusual since resolutions are normally named the other way around, for
example 1920x1080. Also compare the update_screen_size function.
Therefore change the order of arguments for output_get_new_size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
We can just read out the xdg_output field of the provided xwl_output to check
if a rotation is necessary or not.
This makes the function easier to understand. Additionally some documentation
is added.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
CVE-2020-14362 ZDI-CAN-11574
This vulnerability was discovered by:
Jan-Niklas Sohn working with Trend Micro Zero Day Initiative
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
CVE-2020-14361 ZDI-CAN 11573
This vulnerability was discovered by:
Jan-Niklas Sohn working with Trend Micro Zero Day Initiative
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
CVE-2020-14346 / ZDI-CAN-11429
This vulnerability was discovered by:
Jan-Niklas Sohn working with Trend Micro Zero Day Initiative
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
CVE-2020-14345 / ZDI 11428
This vulnerability was discovered by:
Jan-Niklas Sohn working with Trend Micro Zero Day Initiative
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
It always takes one update cycle for the copy to become visible on the
host windowing system, so waiting for the target MSC resulted in 1 cycle
delay.
We re-use the idle list for copies which were executed but need their
completion event sent.
Fixes black seams when resizing the "Builder" sub-window of
GDK_BACKEND=x11 gtk4-demo
on Xwayland (see
https://gitlab.gnome.org/GNOME/mutter/-/issues/1290#note_873557).
Unfortunately, this cannot completely fix the seams with apps which
queue up multiple frames in advance, since there's always at least one
queued frame corresponding to the old window size. But it should at
least help a little in that case as well.
v2:
* Bug fix: Don't update exec_msc in present_wnmd_check_flip_window.
(Roman Gilg)
* Use exec_msc = target_msc - 1 instead of exec_msc--, and add a
comment, for clarity.
v3:
* Drop exec_msc = target_msc again in present_wnmd_execute.
* present_execute_copy should never set vblank->queued in
present_wnmd_execute now, so replace that branch with an assertion.
(Roman Gilg)
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
Allowing it to be called from more functions than before. No functional
change.
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
For tracking the MSC when the present can be executed separately from
the target MSC.
Allows removing the requeue field instead, plus more later.
v2:
* Rename wait_msc → exec_msc (Roman Gilg)
* Use exec_msc = target_msc instead of exec_msc++, for clarity.
* Bug fix: Set exec_msc = target_msc also if present_flip returned
false in present_execute.
v3:
* Set exec_msc = target_msc also if present_wnmd_flip returned
false in present_wnmd_execute, for consistency.
v4:
* Specifically check for exec_msc == crtc_msc + 1 in
present_execute_wait/copy, to avoid re-introducing
https://bugs.freedesktop.org/show_bug.cgi?id=94596 .
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
Preparation for different handling between SCMD & WNMD. No functional
change intended.
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
(Using GLSL 1.30 or newer)
The width/height members of xRectangle are unsigned, but they were
being interpreted as signed when converting to floating point for the
vertex shader, producing incorrect drawing for values > 32767.
v2:
* Use separate GL_UNSIGNED_SHORT vertex attribute for width/height.
(Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
You will not find GL_ARB_* extensions in a GLES context by definition,
the droid you're looking for is named GL_KHR_debug.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Xwayland is just a Wayland client, no X11 screensaver should be
expected to work reliably on Xwayland when running rootless because
Xwayland cannot grab the input devices so it has no way to actually
lock the screen managed by the Wayland compositor.
Turn off the screensaver on Xwayland when running rootless by setting
the screensaver timeout and interval and their default values to zero
and disable the MIT-SCREEN-SAVER extension.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1051
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Avoid leaking un-initalized memory to clients by zeroing the
whole pixmap on initial allocation.
This vulnerability was discovered by:
Jan-Niklas Sohn working with Trend Micro Zero Day Initiative
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Instead of optionally return early when an event is aborted and potentially
clean it up in there we can only optionally inform Present if not aborted and
afterwards clean it up if required.
Saves some lines of code and conditional branches.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
On a DT-base PCI platform, the sysfs path of vga device is like this:
/sys/devices/platform/bus@10000000/1a000000.pci/pci0000:00/0000:00:11.0/0000:04:00.0.
Then the ID_PATH from udev is platform-1a000000.pci-pci-0000:04:00.0 and
the BusID will be pci-0000:04:00.0, which causes Xorg start fail. This
is because config_udev_odev_setup_attribs() use strstr() to search the
first "pci-" in ID_PATH. To fix this, we implement a strrstr() function
and use it to search the last "pci-" in ID_PATH, which can get a correct
BusID.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
For Pixmap flips to have well defined outcomes the window must be contained by
the valid region if such region was specified.
The valid region is inserted as an argument to the check in window mode.
Setting this argument is missing in screen mode as well but we ignore it for now
and only add it to window mode.
It seems there are none or only very few clients actually making use of valid
regions at the moment. For simplicity we therefore just check if a valid region
was set by the client and in this case do never flip, independently of the
window being contained by the region or not.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
The function is never called from present_screen.c in contrast to the behavior
in screen mode.
In present_wnmd.c we can simply remove the function which does an unnecessary
check of the property before setting it and directly set the property at the
two locations the function was called previously.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
With the newly introduced separate API method for idling a presented Pixmap in
window mode we can simplify the logic by allowing calls to it at any point in
time.
This is done by setting the flip_idler flag if the Pixmap was idled before
being presented.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Notifying Present about events' states was done prior with the single function
present_wnmd_event_notify just like in screen mode. But it is more intelligible
if at least in window mode we make use of three different functions with names
that directly indicate what their purpose is:
* present_wnmd_event_notify only for queued events feedback.
* present_wnmd_flip_notify for when a presentation occured (flip).
* present_wnmd_idle_notify for when the Pixmap of the event can be reused.
This is an API-breaking change in regards to window mode. DDX written against
the previous version won't work anymore. It is assumed that there only exists
the XWayland DDX at the moment using the window mode such that this is not an
issue for the overall ecosystem.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Rename the lists release_queue to release_list and event_list to
wait_list.
The prior names release_queue and event_list were ambiguous: in both are event-
like vblanks which can be removed from the lists in random order. In the
release_queue can be flips that are already released but still wait for the
sync or frame callback but normally the release comes later. In the event_list
are queued events waiting for a later msc.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Commit 1e3f9ea1 removed some NULL checks from xf86RandR12.c, on the premise that
they can't be reached unless RandR has already been initialized. For threesuch
calls, that's not true:
xf86Crtc.c::xf86CrtcScreenInit():
if (c == config->num_crtc) {
xf86RandR12SetRotations(screen, RR_Rotate_0 | RR_Rotate_90 |
RR_Rotate_180 | RR_Rotate_270 |
RR_Reflect_X | RR_Reflect_Y);
xf86RandR12SetTransformSupport(screen, TRUE);
}
else {
xf86RandR12SetRotations(screen, RR_Rotate_0);
xf86RandR12SetTransformSupport(screen, FALSE);
}
xf86Crtc.c::xf86CrtcCloseScreen():
xf86RandR12CloseScreen(screen);
This change adds checks back to xf86RandR12Set{Rotations,TransformSupport}() and
xf86RandR12CloseScreen(), checking that xf86RandR12KeyRec has been registered.
Without this, X will hit an assert that causes it to abort.
Signed-off-by: Alex Goins <agoins@nvidia.com>