Add support for Amiga-style bitplanes, with 4 or 8 bits per pixel.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Keith Packard <keithp@keithp.com>
Add support for Atari-style interleaved bitplanes, with 2 bytes interleave
and 4 or 8 bits per pixel.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
miCreateDefColormap() only preallocates black and white pixels if
depth > 1.
Hence override the visual, so fbdevCreateColormap() takes care of it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Monochrome supports StaticGray, with hardcoded black and white pixels.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Older frame buffer devices may not fill in fix.line_length, in which
case it must be calculated by the application.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This fixes:
hw/kdrive/fbdev/fbdev.c: In function 'fbdevInitialize':
hw/kdrive/fbdev/fbdev.c:41:25: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
So when we VT switch back and attempt to flush the input devices,
we don't succeed because evdev won't return part of an event,
since we were only asking for 4 bytes, we'd only get -EINVAL back.
This could later cause events to be flushed that we shouldn't have
gotten.
This is a fix for CVE-2013-1940.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Revert 70739e817b and mostly revert
c31eac647a.
Further investigation shows the encountered race condition is between
lightdm and plymouth-splash, as implemented in the Ubuntu distribution
within the limitations of upstart's job coordination logic, and can (and
should) be fixed within those limiations. Not in xserver itself.
This leaves some of the diagnostic improvements from the recent patch
series, in case others run into a similar situation.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This path is technically executed through config/udev, but having two
messages in the form "config/udev: Adding drm device" makes it appear as if
the udev filters are wrong and it's trying to add the same device twice. In
fact, it's only one device, only added once, but a duplicate log message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We don't want to hotplug output devices while we are VT switched,
as we get races between multiple X servers on the device open, and
drm device master status. This just queues device opens until we return
from VT switch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This replaces some previous uses of direct xf86Screens[0] accesses.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This is just a simple interface to avoid accessing x86Screens[0]
directly.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This removes a large number of redundant declaration warnings.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
If other processes have had drm open previously, xserver may attempt to
open the device too early and fail, with xserver error exit "Cannot
run in framebuffer mode" or Xorg.0.log messages about "setversion 1.4
failed".
In this situation, we're receiving back -EACCES from libdrm. To address
this we need to re-set ourselves as the drm master, and keep trying to
set the interface until it works (or until we give up).
See https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/982889
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
And if we've had to delay booting due to not being able to set the
interface, fess up.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
hw/kdrive/fbdev/fbdev.c: In function 'fbdevRandRSetConfig':
hw/kdrive/fbdev/fbdev.c:470:19: warning: variable 'newheight' set but not used [-Wunused-but-set-variable]
hw/kdrive/fbdev/fbdev.c:470:9: warning: variable 'newwidth' set but not used [-Wunused-but-set-variable]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Section "Monitor"
Identifier "a21inch"
Option "PreferredMode" "1600x1200"
Option "ZoomModes" "1600x1200 1280x1024 1280x1024 640x480"
EndSection
The option's effect is to search for and mark once each named mode in
the output modes list. So the specification order is free and the zoom
modes sequence follows the order of the output modes list. All marked
modes are available via the Ctrl+Alt+Keypad-{Plus,Minus} key
combination.
See also http://bugs.freedesktop.org/show_bug.cgi?id=17954.
This option has its use for combined monitor and television setups.
It allows for easy switching between 60 Hz and 50 Hz modes even when a
monitor refuses to display the input signal.
(Includes a few minor changes suggested by Aaron for v2)
Signed-off-by: Servaas Vandenberghe <vdb@picaros.org>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Changes to correctly initialize the sRGB capability attribute and
transfer it between XServer and the client. Modifications include
extension string, transferring visual config attribs and fbconfig
attribs. Also, attribute is initialized in the modules which do not
really use it (xquartz and xwin).
This version advertises both ARB and EXT strings, and initializes
the capability to default value of FALSE. It has corrected required
GLX version and does not influence swrast. The sRGB capable attribute
is attached only to those configs which do have this capability.
Both ARB and EXT versions share the same GLX extension enabling bit.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ephyrvideo.c: In function 'ephyrPutVideo':
ephyrvideo.c:1009:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1009:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1009:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1009:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrGetVideo':
ephyrvideo.c:1058:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1058:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1058:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1058:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrPutStill':
ephyrvideo.c:1107:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1107:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1107:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1107:9: warning: variable 'drw_x' set but not used
ephyrvideo.c: In function 'ephyrGetStill':
ephyrvideo.c:1156:42: warning: variable 'drw_h' set but not used
ephyrvideo.c:1156:31: warning: variable 'drw_w' set but not used
ephyrvideo.c:1156:20: warning: variable 'drw_y' set but not used
ephyrvideo.c:1156:9: warning: variable 'drw_x' set but not used
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
kinput.c: In function 'KdEnqueueKeyboardEvent':
kinput.c:1845:16: warning: variable 'ctrl' set but not used
kinput.c:1844:17: warning: variable 'keyc' set but not used
kinput.c: In function 'KdEnqueuePointerEvent':
kinput.c:1887:12: warning: variable 'ms' set but not used
kxv.c: In function 'KdXVDisable':
kxv.c:1181:19: warning: variable 'ScreenPriv' set but not used
mouse.c: In function 'ps2SkipInit':
mouse.c:444:9: warning: variable 'skipping' set but not used
mouse.c: In function 'ps2Init':
mouse.c:473:10: warning: variable 'waiting' set but not used
mouse.c:472:9: warning: variable 'skipping' set but not used
fbdev.c: In function 'fbdevRandRSetConfig':
fbdev.c:468:19: warning: variable 'newheight' set but not used
fbdev.c:468:9: warning: variable 'newwidth' set but not used
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Otherwise, displays driven by GPU screens remain on all the time.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use bytes_per_line and bits_per_pixel from the created XImage to fix
https://bugzilla.redhat.com/show_bug.cgi?id=518960
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
So in the cold plug server shutdown case, we reap the resources
before we call CloseScreen handlers, so the config->randr_provider
is a dangling pointer when the xf86CrtcCloseScreen handler is called,
however in the hot screen unplug case, we can't rely on automatically
reaped resources, so we need to clean up the provider in the xf86CrtcCloseScreen
case.
This patch provides a cleanup callback from the randr provider removal
into the DDX so it can cleanup properly, this then gets called by the automatic
code for cold plug, or if hot unplug it gets called explicitly.
Fixes a number of random server crashes on shutdown
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58174
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=891140
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The previous fix for the previous fix, didn't fully work,
If we don't set compat_output we end up doing derferences
of arrays with -1, leading to valgrind warnings.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Due to another bug, the modesetting/udl driver would fail to init properly
on hotplug, when it did the code didn't clean up properly, and on removing
the device the server could crash.
Found in F18 testing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
With this option passed, ephyr windows can be resized like normal
windows on the fly, without the need of an explicit parent window.
Signed-off-by: Daniel Martin <daniel.martin@secunet.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86Cursor.c:19:18: warning: redundant redeclaration of 'inputInfo'
[-Wredundant-decls]
In file included from xf86Cursor.c:18:0:
../../../include/inputstr.h:614:57: note: previous declaration of
'inputInfo' was here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Unused as of 5d309af2ed
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
This is necessary when the input handler deletes itself from the
list. Bug found by Maarten Lankhorst, this patch uses the list macros
instead of open-coding the fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
man xorg.conf states that the 'Device' identifier is required in the
'Screen' section, yet current xserver defaults properly and boots up
fine without it.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=20742
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of defaulting to -intel for Oaktrail, Medfield, and CDV chips,
default to -fbdev. For Poulsbo (only), attempt to use -psb if it's
installed, and fallback to fbdev otherwise. All other Intel chips
should use -intel.
This fixed an issue where -intel would load on these chips and cause a
boot failure. Newer -intel drivers avoid the boot hang, but it's still
the wrong driver to load, so why take chances.
The patch was originally created by Stefan Dirsch for OpenSUSE. We have
included it in our stable release (Ubuntu "quantal" 12.10) since
December.
ref: https://bugzilla.novell.com/show_bug.cgi?id=772279
ref: https://bugs.launchpad.net/ubuntu/+bug/1069031
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60514
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If acpid sends a string in a format that we can't parse, bail out instead of
potentially dereferencing a NULL-pointer.
X.Org Bug 73227 <http://bugs.freedesktop.org/show_bug.cgi?id=73227>
Signed-off-by: Ted Felix <ted@tedfelix.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
dmx-config.h is a server header which includes dix-config.h. That again
defines a bunch of server-specifics, including setting the size of XID to
32 bit.
libX11 uses unsigned long (8 bits on x86_64). XGCValues thus ends up being
16 bytes smaller in xdmxconfig than in the library, causing garbage to be
sent to the server.
X.Org Bug 37502 <http://bugs.freedesktop.org/show_bug.cgi?id=37502>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Call find_header first, returning on failure before calling malloc.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>