Request-handlers as registered in the requestVector array, always get
passed the clientPtr for the client which sent the request.
But the implementation of many request-handlers typically consists of
a generic handler calling implementation specific callbacks and / or
various helpers often multiple levels deep and in many cases the clientPtr
does not get passed to the callbacks / helpers.
This means that in some places where we would like to have access to the
current-client, we cannot easily access it and fixing this would require
a lot of work and often would involve ABI breakage.
This commit adds a GetCurrentClient helper which can be used as a
shortcut to get access to the clienPtr for the currently being processed
request without needing a lot of refactoring and ABI breakage.
Note using this new GetCurrentClient helper is only safe for code
which only runs from the main thread, this new variable MUST NOT be used
by code which runs from signal handlers or from the input-thread.
The specific use-case which resulted in the creation of this patch is adding
support for emulation of randr / vidmode resolution changes to Xwayland.
This emulation will not actually change the monitor resolution instead it
will scale any window with a size which exactly matches the requested
resolution to fill the entire monitor. The main use-case for this is
games which are hard-coded to render at a specific resolution and have
sofar relied on randr / vidmode to change the monitor resolution when going
fullscreen.
To make this emulation as robust as possible (e.g. avoid accidentally scaling
windows from other apps) we want to make the emulated resolution a per client
state. But e.g. the RRSetCrtc function does not take a client pointer; and is
a (used) part of the Xorg server ABI (note the problem is not just limited
to RRSetCrtc).
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When building Xwayland with neither DRI nor GLamor support enabled with
the Meson build system, the resulting binary would still link against
libdrm and epoxy even though those are not used/needed.
Make sure we require and link against libdrm and epoxy only if needed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
MinGW defines SIG_BLOCK, but doesn't have signal masks, so rather than
checking for SIG_BLOCK, add a configure check for sigprocmask.
v2:
Also add check to meson.build
I don't think an input thread can ever be useful on Windows.
There is a pthread emulation, so having the thread itself isn't much of
a problem.
However, there is no device to wait on for Windows events, and even if
we were to replace select() with WFMO, Windows wants to send events for
a window to the thread which created that window.
So, disable input thread by default for MinGW
v2:
Also add similar to meson.build
Add a new function, GlxServerExports::setClientScreenVendor, which will change
the vendor that handles GLX requests for a screen, but only for requests from
a specific client.
v2: Increment the GLXVND minor version number.
v3: Note the GLXVND version requirement for setClientScreenVendor.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Differences from autotools:
* Autotools defined NO_ALLOCA for OSX builds. I don't think we need
this anymore as Xalloc.h is no longer used anywhere in the xserver.
* X11.bin is linked with -u,miDCInitialize, and then libserver_mi
provided to satisfy (just) that. It's been that way since the commit
which added it. We can't write the equivalent in meson due to linker
argument ordering issues, but do we really need to?
* An explicit -Dsecure-rpc=false is required for OSX, since in meson we
don't do the checks that XTRANS_SECURE_RPC_FLAGS did for the existence
of the specific RPC functions required.
A workaround for https://github.com/mesonbuild/meson/issues/3672
MinGW-w64 gcc has a built-in strndup, but it's not in the C library and
MinGW-w64 headers don't prototype it.
Don't try to use it, as that will cause an undefined reference if gcc
decides that an out-of-line call is appropriate.
Currently, this can error if dri.pc isn't found, as we can't then get
the value of pkgconfig variable from it:
include/meson.build:199:10: ERROR: 'dri' is not a pkgconfig dependency
I think we need DRI_DRIVER_PATH (only) when building GLX, even if dri2/3
isn't enabled, so we know where to load swrast_dri.so from.
(For autotools, configure.ac directly calls `pkg-config
--variable=dridriverdir dri`, the backticks swallowing any error,
causing the value of this define to be empty if dri.pc isn't present)
It doesn't require shared memory dir and thus allows
to avoid cases when this dir is detected incorrectly,
as in https://bugreports.qt.io/browse/QTBUG-71440
Signed-off-by: Alexander Volkov <a.volkov@rusbitech.ru>
If the server resets, most client workqueues are cleaned up as the
clients are killed.
The one exception is the server's client, which is exempt from
the killing spree.
If that client has a queued work procedure active, it won't get
cleared on reset.
This commit ensures it gets cleared too.
glibc 2.25 has dropped sys/sysmacros.h from sys/types.h, so add
it explicitly in config/udev.c.
This is similar to the commit 84e3b96b53
Signed-off-by: Manoj Gupta <manojgupta@chromium.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
___CLIENTSIGNAL_DEFINED___ is a hack to work around the declaration of
ClientSignal both in our own headers and in <X11/include/fontproto.h>,
the latter of which is properly part of libXfont (1, only) but packaged
in xorgproto because we have made some mistakes. ClientSignalAll needs
no such workaround.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Despite being packaged in xorgproto (formerly fontsproto), fontproto.h
is actually a list of the ABI libXfont version 1 expected of the X
server. We switched to libXfont2 three years ago, this is unnecessary.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Lifted from vfb. xfree86 had almost the same thing but unparameterized,
port it to the vfb style.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Prodding the builder's filesystem for tmp dirs doesn't necessarily
tell you anything about what the actual host's filesystem is going to
look like, so we should just try the dirs at runtime.
Signed-off-by: Eric Anholt <eric@anholt.net>
I don't think this is useful information to have in the log, and it's
a bunch of autotools and meson logic to produce it.
Signed-off-by: Eric Anholt <eric@anholt.net>
60ec8ead broke the autotools build:
sdksyms.o:(.data+0x58): undefined reference to `InitConnectionLimits'
sdksyms.o:(.data+0x2ec8): undefined reference to `xf86ServerName'
collect2: error: ld returned 1 exit status
Makefile:811: recipe for target 'Xorg' failed
Likewise 3a4d7c79 for InitConnectionLimits.
Signed-off-by: Adam Jackson <ajax@redhat.com>
This variable was no longer being read anywhere. MAXCLIENTS the macro is
the compile-time maximum limit, LIMITCLIENTS the macro is the default
limit, LimitClients the variable is the limit for the current server.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The client ID is only needed for XRes, and autotools build ignores the
--clientids= arg if xres is disabled. We haven't made a meson option
for disabling tracking client ids (is it actually worth a build
option?), so just make this depend on xres.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This makes us match the featureset of autotools, and also fixes the
non-Linux default value to match.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is silly to have optional based on detection of the protocol
headers, particularly now that we have a single protocol header repo
to install.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
We already have pm_noop.c being built most of the time for the
no-OS-PM case, so just switch to always using it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
CONFIG_UDEV and CONFIG_UDEV_KMS are the actual defines that are used
in the C code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The SCM_RIGHTS flag seems to be the thing that xtrans depends on, and
meson makes the check easy without needing a build option.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The autoconf build hard-codes XCONFIGFILE to just 'xorg.conf':
XF86CONFIGFILE="xorg.conf"
AC_DEFINE_DIR(XCONFIGFILE, XF86CONFIGFILE, [Name of configuration file])
Later, the X server passes that into DoSubstitution() which expands the path:
DoSubstitution(template="/etc/X11/%X", ..., XConfigFile="xorg.conf")
This returns "/etc/X11/xorg.conf".
The Meson build, on the other hand, sets XCONFIGFILE to
join_paths(get_option('sysconfdir'), 'xorg.conf'). If sysconfdir is /etc, this
results in '/etc/xorg.conf', resulting in DoSubstitution returning
'/etc/X11/etc/xorg.conf'.
Fix this by just hard-coding XCONFIGFILE to 'xorg.conf'.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
'libdir' defaults to 'lib', so running X -showDefaultLibPath just prints 'lib'
instead of '/usr/lib' or '/usr/local/lib'. Use joint_paths() to get the correct
full path.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
This adds initial support for displaying Xwayland applications through
the use of EGLStreams and nvidia's custom wayland protocol by adding
another egl_backend driver. This also adds some additional egl_backend
hooks that are required to make things work properly.
EGLStreams work a lot differently then the traditional way of handling
buffers with wayland. Unfortunately, there are also a LOT of various
pitfalls baked into it's design that need to be explained.
This has a very large and unfortunate implication: direct rendering is,
for the time being at least, impossible to do through EGLStreams. The
main reason being that the EGLStream spec mandates that we lose the
entire color buffer contents with each eglSwapBuffers(), which goes
against X's requirement of not losing data with pixmaps. no way to use
an allocated EGLSurface as the storage for glamor rendering like we do
with GBM, we have to rely on blitting each pixmap to it's respective
EGLSurface producer each frame. In order to pull this off, we add two
different additional egl_backend hooks that GBM opts out of
implementing:
- egl_backend.allow_commits for holding off displaying any EGLStream
backed pixmaps until the point where it's stream is completely
initialized and ready for use
- egl_backend.post_damage for blitting the content of the EGLStream
surface producer before Xwayland actually damages and commits the
wl_surface to the screen.
The other big pitfall here is that using nvidia's wayland-eglstreams
helper library is also not possible for the most part. All of it's API
for creating and destroying streams rely on being able to perform a
roundtrip in order to bring each stream to completion since the wayland
compositor must perform it's job of connecting a consumer to each
EGLstream. Because Xwayland has to potentially handle both responding to
the wayland compositor and it's own X clients, the situation of the
wayland compositor being one of our X clients must be considered. If we
perform a roundtrip with the Wayland compositor, it's possible that the
wayland compositor might currently be connected to us as an X client and
thus hang while both Xwayland and the wayland compositor await responses
from eachother. To avoid this, we work directly with the wayland
protocol and use wl_display_sync() events along with release() events to
set up and destroy EGLStreams asynchronously alongside handling X
clients.
Additionally, since setting up EGLStreams is not an atomic operation we
have to take into consideration the fact that an EGLStream can
potentially be created in response to a window resize, then immediately
deleted due to another pending window resize in the same X client's
pending reqests before Xwayland hits the part of it's event loop where
we read from the wayland compositor. To make this even more painful, we
also have to take into consideration that since EGLStreams are not
atomic that it's possible we could delete wayland resources for an
EGLStream before the compositor even finishes using them and thus run
into errors. So, we use quite a bit of tracking logic to keep EGLStream
objects alive until we know the compositor isn't using them (even if
this means the stream outlives the pixmap it backed).
While the default backend for glamor remains GBM, this patch exists for
users who have had to deal with the reprecussion of their GPU
manufacturers ignoring the advice of upstream and the standardization of
GBM across most major GPU manufacturers. It is not intended to be a
final solution to the GBM debate, but merely a baindaid so our users
don't have to suffer from the consequences of companies avoiding working
upstream. New drivers are strongly encouraged not to use this as a
backend, and use GBM like everyone else. We even spit this out as an
error from Xwayland when using the eglstream backend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just a small autogenerated header that will soon contain more then just
one macro.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Install missing headers to the SDK directory to allow external modules
to properly build against the SDK. After this commit, the list of files
installed in the SDK include directory is the same as the list of files
installed by the autotools-based build.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Provide more values for the definitions in xorg-server.h for Meson
builds. The only missing defines left after this are _BSD_SOURCE,
_POSIX_SOURCE and _XOPEN_SOURCE, but Meson seems to already define
these via the command-line if necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Some drivers (such as xf86-input-libinput) require the xorg-server.h to
build. Generate it and install it so that it can be used by users.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There is no code around that will ever define values for the
WORKING_UNALIGNED_INT or XORG_RELEASE symbols, so they will always end
up commented out and are therefore completely useless.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There is no code around that will ever define values for the XLOADABLE,
WORKING_UNALIGNED_INT or XORG_RELEASE symbols, so they will always end
up commented out and are therefore completely useless.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xdmcp is an optional dependency, so make sure the build succeeds if it
is missing.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The autotools build gets this from some macros in fontutil, but they're
just wrappers around pkgconfig.
v2: Use same default as autotools (Keith Packard)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Having different types of code all trying to check for elevated privileges
is a bad idea. This implementation is the most thorough one.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Everything is implemented to support protocol version 1.2. Make it
official.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Otherwise this is broken on cygwin:
rrlease.c: In function ‘ProcRRCreateLease’:
rrlease.c:305:9: error: implicit declaration of function ‘WriteFdToClient’ [-Werror=implicit-function-declaration]
if (WriteFdToClient(client, fd, TRUE) < 0) {
Signed-off-by: Adam Jackson <ajax@redhat.com>
Enable DRI3 v1.2 now that all functions have been implemented and
that there is at least one backend implementing the driver hooks
(modesetting/glamor).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It relies on GBM >= 17.1.0 where we can import BO with multiple
planes and a format modifier (GBM_BO_IMPORT_FD_MODIFIER).
v2: Properly free fds in Xwayland
[Also add glamor_egl_ext.h to Makefile.am for distcheck's sake - ajax]
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Retrieve IN_FORMATS property from the plane. It gives the
allowed formats and modifiers for BO allocation.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add 'check_flip2' hook for driver to let know the core
about why flipping is not possible ('reason').
If it is because of unsupported buffer format/modifier,
a PresentCompleteNotify event is sent to the client with
the PresentCompleteModeSuboptimalCopy mode.
v2: Check for PresentOptionSuboptimal and check driver version
before using 'check_flip2'.
v3: Only require one of 'check_flip' or 'check_flip2' to be
implemented by the driver.
Refactor reasons list to enum
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a stub for Xnest so it continues to link, but otherwise we support
GLX on every server so there's no need to make every DDX add it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The big change here is MakeCurrent and context tag tracking. We now
delegate context tags entirely to the vnd layer, and simply store a
pointer to the context state as the tag data. If a context is deleted
while it's current, we allocate a fake ID for the context and move the
context state there, so the tag data still points to a real context. As
a result we can stop trying so hard to detach the client from contexts
at disconnect time and just let resource destruction handle it.
Since vnd handles all the MakeCurrent protocol now, our request handlers
for it can just be return BadImplementation. We also remove a bunch of
LEGAL_NEW_RESOURCE, because now by the time we're called vnd has already
allocated its tracking resource on that XID.
v2: Update to match v2 of the vnd import, and remove more redundant work
like request length checks.
v3: Add/remove the XID map from the vendor private thunk, not the
backend. (Kyle Brenneman)
v4: Fix deletion of ghost contexts (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is based on an out-of-tree module written by Kyle:
https://github.com/kbrenneman/libglvnd/tree/server-libglx
I (ajax) did a bunch of cosmetic fixes, ported it off xfree86 API,
added request length checks, and fixed a minor bug or two.
v2: Use separate functions to set/get a context tag's private data, and
call the backend's MakeCurrent when a client disconnects to unbind the
context. (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Just mimic autoconf file for xf86bigfont, screensaver,
xres, xace and xinerama extensions
Signed-off-by: Laurent Carlier <lordheavym@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just mimic autoconf file, DPMS is disabled with Xquartz
Signed-off-by: Laurent Carlier <lordheavym@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The helper xorg_list_is_empty returns True when the list is empty and not when
it contains one or more elements.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keeps us from needing to add glx/ to the include path everywhere, since
we can't add it to the dix include path because the header file names
conflict with glxproxy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This really just wants to be the list of disable booleans and
initialization functions, and nothing else. Stop including the protocol
headers from extinit.h, remove a stray mention of xgl, and move an
XInput declaration to a better place.
v2: A bunch of drivers assume they'll get the DPMS tokens implicitly,
so add it to globals.h.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Formerly used by the rgb database code, which hasn't been a thing in
over a decade.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
x11perf -noop with 200 xlogos connected is slightly faster with ports:
before after Operation
---------- ----------------- --------------------
18400000.0 19200000.0 (1.04) X protocol NoOperation
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Harris <pharris@opentext.com>
AIX's poll only allows FD_SETSIZE entries in the fd list, which is
insufficient for expanded MaxClients.
As a bonus, x11perf -noop with ~250 xlogos connected is slightly faster
with pollset:
before after Operation
--------- ---------------- --------------------
5750000.0 5990000.0 (1.04) X protocol NoOperation
Signed-off-by: Peter Harris <pharris@opentext.com>
Acked-by: Keith Packard <keithp@keithp.com>
If one misconfigures a ZaphodHeads value (more than 20 characters
without a delimiter), we get an overflow of our buffer. Use
xstrtokenize() instead of writing/fixing our own tokenizer.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>