Even if the driver is handling the transform, we still need to transform
the cursor position for clipping, otherwise we may hide the HW cursor
when the cursor is actually inside the area covered by the CRTC.
v2: Use crtc_x/y local variables for clarity
Reviewed-by: Adam Jackson <ajax@redhat.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
No longer needed now that xf86CursorResetCursor is getting called for
each CRTC configuration change.
v2: Keep xf86_reload_cursors as a deprecated empty inline function
until all drivers stop calling it. (Adam Jackson)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Fixes a crash on startup in the radeon driver's drmmode_show_cursor()
due to xf86_config->cursor == NULL, because no CRTC was enabled yet, so
xf86_crtc_load_cursor_image was never called.
(Also use scrn->pScreen instead of xf86ScrnToScreen(scrn))
v2: Set xf86_config->cursor at the beginning of xf86_load_cursor_image
instead of at the end.
Reviewed-by: Keith Packard <keithp@keithp.com>
This makes the cursor pointer held by xf86Cursors.c get reset to NULL
whenever the cursor isn't displayed, and means that the reference
count held in xf86Cursor.c is sufficient to cover the reference in
xf86Cursors.c.
As HideCursor may be called in the cursor loading path after
UseHWCursor or UseHWCursorARGB when HARDWARE_CURSOR_UPDATE_UNHIDDEN
isn't set in the Flags field, the setting of the cursor pointer had to
be moved to the LoadCursor paths.
LoadCursorARGBCheck gets the cursor pointer, but LoadCursorImageCheck
does not. For LoadCursorImageCheck, I added a new function,
xf86CurrentCursor, which returns the current cursor. With this new
function, we can eliminate the cursor pointer from the
xf86CrtcConfigRec, once drivers are converted over to use it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Slave GPUs don't have a root window to set this on, so don't.
This fixes some crashes I saw just playing around.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When the HW cursor is hidden (e.g. because xf86CursorResetCursor
triggers a switch from HW cursor to SW cursor), the driver isn't
notified of this for disabled CRTCs. If the HW cursor was shown when the
CRTC was disabled, it may still be displayed when the CRTC is enabled
again.
Prevent this by explicitly hiding the HW cursor again after setting a
mode if it's currently supposed to be hidden.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94560
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Add xf86CursorResetCursor, which allows switching between HW and SW
cursor depending on the current state.
Call it from xf86DisableUnusedFunctions, which is called after any CRTC
configuration change such as setting a mode or disabling a CRTC. This
makes sure that SW cursor is used e.g. while a transform is in use on
any CRTC or while there are active PRIME output slaves, and enables HW
cursor again once none of those conditions are true anymore.
Reviewed-by: Keith Packard <keithp@keithp.com>
We currently don't handle transforms for the HW cursor image, so return
FALSE to signal a software cursor must be used if a transform is in use
on any CRTC.
v2: Check crtc->transformPresent instead of crtc->transform_in_use. The
latter is TRUE for rotation as well, which we handle correctly.
Reviewed-by: Keith Packard <keithp@keithp.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The correct refresh rate for this mode is 75, not 85.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
When xf86RandR12Key is not set we will not get to the places where
these tests are done as the functions in question are not called.
In most cases we would have crashed before these checks anyway.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If no compat_output is defined, we inadvertently (attempt to) return
whatever data is at index -1. Instead, return NULL since that's what
callers are expecting.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
This creates an automatic monitor for a tiled monitor at startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the tiles of the monitor in the right place at
X server startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change the X server default to do right-of placement
at startup. This gives an option to allow drivers to
override this placement, which has been used for server
drivers where both heads are not in the same physical
place.
Been in Fedora for a few years, but for tiled monitors
we really want something along these lines.
This is an ABI break.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add support for drivers to set the tiling
property. This is used by clients to
work out the monitor tiles for DisplayID
monitors.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Don't try to destroy rotation_damage in the xf86RotateCloseScreen; it
will have been destroyed when the screen pixmap was destroyed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When no shadow frame buffer is needed, the rotate block handler
doesn't need to be called any more. Remove it from the chain.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
xf86Rotate, it was delaying unwrapping the BlockHandler until after
calling xf86RotateRedisplay. If there was a software cursor on the
screen, the redisplay operation would cause cursor to be removed from
the frame buffer and the misprite block handler to be inserted into
the block handler chain with the misprite screen private saved block
handler now set to xf86RotateBlockHandler.
When xf86RotateRedisplay returned, xf86RotateBlockHandler would then
set screen->BlockHandler to its saved value, call down and then reset
screen->BlockHandler to xf86RotateBlockHandler. miSpriteBlockHandler
would never be called after that, which meant that the software cursor
will now disappear from the screen whenever rendering overlapped and
would only reappear when the cursor was moved.
To correct this, all that is needed is to move the restoration of
screen->BlockHandler to the top of xf86RotateBlockHandler, before the
call to xf86RotateRedisplay.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Create load_cursor_image_check, load_cursor_argb_check,
LoadCursorImageCheck and LoadCursorARGBCheck that can return failure
and use them in preference to the old unchecked variants.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
When setting crtc->gamma_size to randr_crtc->gammaSize we should
use randr_crtc->gammaSize to allocate new gamma table in crtc.
Currently, if randr_crtc->gammaSize > crtc->gammaSize the subsequent
memcpy will overwrite memory beyond the end of gamma table.
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
load_cursor_argb() may need to be able to fail and have the server fall back
to a software cursor in at least the following circumstances.
1) The hardware can only support some ARGB cursors and this does not just
depend on cursor size.
2) Virtual hardware may not wish to pass through a cursor to the host at a
particular time but may wish to accept the same cursor at another time.
This patch adds a return value to the API and makes the server do the
software fall-back on failure.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The detailed timings are for a 15.6" display when max image size
correctly reports 13.3".
Signed-off-by: Arun Raghavan <arun@accosted.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This gets the easy warnings, mostly constant string problems.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of only relying on the Range section, we can do better on
HDMI to find out what is the max dot clock the monitor supports. The
HDMI CEA vendor block adds a TMDS max freq we can use.
This makes X not prune 4k resolutions on HDMI.
v2: Replace X_INFO by X_PROBED in the message that prints the max
TMDS frequency (Chris Wilson)
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
With outputless GPUs showing up we crash here if there are not outputs
try and recover with a bit of grace.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
EDID sometimes lies about screen sizes. Since the screen size is used
by clients to determine the DPI a wrong ration will lead to terrible
looking fonts.
Add a sanity check for the h/v ratio cutting off at 2.4. This would
still accept the cinemascope aspect ratio as valid.
Also add message suggesting to add a quirk table entry.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
You can only register one drawable on a given damage, so there's no
reason to require the caller to specify the drawable, the damage is
enough. The implementation would do something fairly horrible if you
_did_ pass mismatched drawable and damage, so let's avoid the problem
entirely.
v2: Simplify xf86RotateDestroy even more [anholt]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Commit 8f4640bdb9 fixed a bit of a
chicken-and-egg problem by detaching GPU screens when their providers
are destroyed, which happens before CloseScreen is called. However,
this created a new problem: the GPU screen tears down its RandR crtc
objects during CloseScreen and if one of them is active, it tries to
detach the scanout pixmap then. This crashes because
RRCrtcDetachScanoutPixmap tries to get the master screen's screen
pixmap, but crtc->pScreen->current_master is already NULL at that
point.
It doesn't make sense for an unbound GPU screen to still be scanning
out its former master screen's pixmap, so detach them first when the
provider is destroyed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no point in turning on outputs connected to GPU screens during initial
configuration. Not only does this cause them to just display black, it also
confuses clients when these screens are attached to a master screen and RandR
reports that the outputs are already on.
Also, don't print the warning about no outputs being found on GPU screens,
since that's expected.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
scrn->display is a property of the main screen really, and we don't
want to have the GPU screens use it for anything when picking modes
or a front buffer size.
This fixes a bug where when you plugged a display link device, it
would try and allocate a screen the same size as the current running
one (3360x1050 in this case), which was too big for the device. Avoid
doing this and just pick sizes based on whats plugged into this device.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we disconnect an output/offload slave set the changed bits,
so a later TellChanged can do something.
Then when we remove a GPU slave device, sent change notification
to the protocol screen.
This allows hot unplugged USB devices to disappear in clients.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6703a7c7cf
Author: Keith Packard <keithp@keithp.com>
Date: Tue Jan 8 20:24:32 2013 -0800
hw/xfree86: Require only one working CRTC to start the server.
changed the logic to try to set the mode on all connected outputs rather
than abort upon the first failure. The return error code was then
tweaked such that it reported success if it set a mode on any crtc.
However, this confuses the headless case where we never enable any crtcs
and also, importantly, never fail to set a crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59190
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Also-written-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes a large number of redundant declaration warnings.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Section "Monitor"
Identifier "a21inch"
Option "PreferredMode" "1600x1200"
Option "ZoomModes" "1600x1200 1280x1024 1280x1024 640x480"
EndSection
The option's effect is to search for and mark once each named mode in
the output modes list. So the specification order is free and the zoom
modes sequence follows the order of the output modes list. All marked
modes are available via the Ctrl+Alt+Keypad-{Plus,Minus} key
combination.
See also http://bugs.freedesktop.org/show_bug.cgi?id=17954.
This option has its use for combined monitor and television setups.
It allows for easy switching between 60 Hz and 50 Hz modes even when a
monitor refuses to display the input signal.
(Includes a few minor changes suggested by Aaron for v2)
Signed-off-by: Servaas Vandenberghe <vdb@picaros.org>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
So in the cold plug server shutdown case, we reap the resources
before we call CloseScreen handlers, so the config->randr_provider
is a dangling pointer when the xf86CrtcCloseScreen handler is called,
however in the hot screen unplug case, we can't rely on automatically
reaped resources, so we need to clean up the provider in the xf86CrtcCloseScreen
case.
This patch provides a cleanup callback from the randr provider removal
into the DDX so it can cleanup properly, this then gets called by the automatic
code for cold plug, or if hot unplug it gets called explicitly.
Fixes a number of random server crashes on shutdown
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58174
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=891140
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The previous fix for the previous fix, didn't fully work,
If we don't set compat_output we end up doing derferences
of arrays with -1, leading to valgrind warnings.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of requiring every mode set to complete successfully, start up
as long as at least one CRTC is working. This avoids failures when one
or more CRTCs can't start due to mode setting conflicts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Following commit 37d956e3ac
Author: Keith Packard <keithp@keithp.com>
Date: Mon Sep 10 11:14:20 2012 +1000
xf86: fix compat output selection for no output GPUs
headless servers can no longer startup as we no longer select a compat
output for the fake framebuffer.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56343
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is set by pre_init not screen init, so if we free it here
and then recycle the server, we lose all the providers.
I think we need to wrap FreeScreen here to do this properly,
will investigate for 1.14 most likely, safer to just leak this
on server exit for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The core RandR screen cleanup now involves cleaning up any GPU screen
associations, and those call down into DDX to clean up the driver. If
the pointers from the xf86 structures back to the core randr
structures are set to NULL at that point, bad things happen.
This patch "knows" that the core RandR close screen is underneath the
xf86 randr close screen function, and so makes sure it gets called
first.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The indenter seems to have gotten confused by initializing arrays of
structs with the struct defined inline - for predefined structs it did
a better job, so match that.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The RandR CRTC structures are freed when their resource IDs are
destroyed during server shut down, which is before the screen is
closed. Calling back into RandR with stale pointers just segfaults the
server.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Knut Petersen <knut_petersen@t-online.de>
Panning is at odds with CRTC cursor confinement. This disables CRTC cursor
confinement as long as panning is enabled.
Fixes regression introduced in 56c90e29f0.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's say - purely for the sake of argument, mind you - that you had a
server GPU with anemic memory bandwidth, and you walked up to it and
plugged in a monitor that was 1920x1080 because that's what happened to
be on the crash cart. Say the memory bandwidth is such that anything
larger than 1280x1024 gets filtered away. Now you're in trouble,
because the established timings section includes a 720x400 mode because
that's what DOS 80x25 is, and that happens to just about match the
physical aspect ratio.
Instead let's reuse the logic from the existing aspect-match path: pick
the larger mode of either the physical aspect ratio or 4:3.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Based on the original patch by Chris Wilson, which was a better fix than mine.
We stash a copy of the desiredMode on the crtc so that we can restore it
after a vt switch. This copy is a simple memcpy and so also stashes a
references to the pointers contained within the desiredMode. Those
pointers are freed the next time the outputs are probed and mode list
rebuilt, resulting in us chasing those dangling pointers on the next
mode switch.
==22787== Invalid read of size 1
==22787== at 0x40293C2: __GI_strlen (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==22787== by 0x668F875: strdup (strdup.c:42)
==22787== by 0x5DBA00: XNFstrdup (utils.c:1124)
==22787== by 0x4D72ED: xf86DuplicateMode (xf86Modes.c:209)
==22787== by 0x4CA848: xf86CrtcSetModeTransform (xf86Crtc.c:276)
==22787== by 0x4D05B4: xf86SetDesiredModes (xf86Crtc.c:2677)
==22787== by 0xA7479D0: sna_create_screen_resources
(sna_driver.c:220)
==22787== by 0x4CB914: xf86CrtcCreateScreenResources (xf86Crtc.c:725)
==22787== by 0x425498: main (main.c:216)
==22787== Address 0x72c60e0 is 0 bytes inside a block of size 9 free'd
==22787== at 0x4027AAE: free (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==22787== by 0x4A547E: xf86DeleteMode (xf86Mode.c:1984)
==22787== by 0x4CD84F: xf86ProbeOutputModes (xf86Crtc.c:1578)
==22787== by 0x4DC405: xf86RandR12GetInfo12 (xf86RandR12.c:1537)
==22787== by 0x518119: RRGetInfo (rrinfo.c:202)
==22787== by 0x51D997: rrGetScreenResources (rrscreen.c:335)
==22787== by 0x51E0D0: ProcRRGetScreenResources (rrscreen.c:475)
==22787== by 0x513852: ProcRRDispatch (randr.c:493)
==22787== by 0x4346DB: Dispatch (dispatch.c:439)
==22787== by 0x4256E4: main (main.c:287)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36108
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
This adds support for setting the offload sink to the xf86 ddx.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is so we can tell the scanout pixmap has changed between calls
to the crtc set function.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes a segfault where this code believes we are outside the screen
boundaries on a slave device, but we aren't.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for the randr callback for setting the output source
for a device.
v2: drop root clip change on detach
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will detach any scanout pixmaps attached to slave crtcs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add the simple passthrough interface for drivers to use,
so they can set scanout pixmaps.
v2: detach scanout pixmap properly.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
v2: Split out DGAAvailable into two interfaces, one for calls from protocol
decoding and one for internal usage, after discussion with ajax and keithp.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is the default attachment, unbound gpu screens get
attached to the 0 protocol screen.
detach on hotunplug.
v2: detach after tearing down crtc/outputs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the framework for DDX provider support.
v2: as per keithp's suggestion remove the xf86 provider object
and just store it in the toplevel object.
v3: update for new protocol
v4: drop devPrivate, free name
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This loop needs to count from 7 to 0, not only from 7 to 1.
The current code always skips the modes {1152, 864, 75, 0}, {1280, 1024, 85, 0},
{1400, 1050, 75, 0}, {1600, 1200, 70, 0} and {1920, 1200, 60, 0}.
Signed-off-by: Torsten Kaiser <x11@ariolc.dyndns.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using -O3 gcc notes that m could reach beyound the end of the EstIIIModes array,
if the last bits of the 11s byte where set.
Fix this, by extending the array to cover all possible bits from est.
https://bugs.freedesktop.org/show_bug.cgi?id=45623
Signed-off-by: Torsten Kaiser <x11@ariolc.dyndns.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This code existed in 3 different forms, perhaps it should be
consolidated.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a squash merge containing all the API changes, as
well as the video ABI bump.
Its been squashed to make bisection easier.
Full patch log below:
commit b202738bbf0c5a1c1172767119c2c71f1e7f8070
Author: Aaron Plattner <aplattner@nvidia.com>
Date: Mon May 14 15:16:11 2012 -0700
xfree86: Bump video ABI to 13.0
The ABI was broken by changes to convert from screen index numbers to ScreenPtr
/ ScrnInfoPtr in various structures and function signatures.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d5f7d9f8d408bcad3f83277d255f25d3b0edbf3
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 10:56:57 2012 +0100
xf86: xf86ClearEntityListForScreen should take a pScrn
When adding GPU screens this make life easier.
(also fix comment, as pointed out by Alan)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit afee8b5ab4501597ecc1ade34124d7ca227ab055
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 07:07:32 2012 +0100
xf86i2c: add pscrn for drivers to use
This just adds a pScrn pointer into the struct for the drivers to use
instead of scrnIndex. Mostly scrnIndex is used for logging, but some
drivers use it to lookup xf86Screens, so let them stash a pScrn instead.
Removing the scrnIndex is a bit more involved and I'm not sure its worth
the effort. Doing i2c in the X server is legacy code as far as I'm concerned.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit ea5092f1f679691d187f1eee9427e6057beec56e
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 19:25:20 2012 +0100
dix/gc: consolidate GC object creation in one place
The standard GC create and scratch GC create were 90% the same really,
and I have a need in the future for creating GC objects without the
other bits, so wanted to avoid a third copy.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d91482ea9b4883e64e496f2768168e0ffa21ba1
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 10:24:06 2012 +0100
xf86: add a define to denote the new non-index interfaces are being used
This can be used by drivers to provide compatible APIs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 37c3ae3e6cd4f3dedc72f371096d6743f8f99df3
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 15:09:12 2012 +0100
dix: make Create/Free scratch pixmaps take a ScreenPtr
While technically an API/ABI change I doubt anyone uses it,
but it helps in splitting screens up.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 75f2062a3fe94f04764ecc7d2ff2fbbeccb9da60
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:57:55 2012 +0100
xf86/xv: remove scrnIndexfrom xf86FindXvOptions.
Move this interface to taking an ScrnInfoPtr.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit f80c2374f40ea7b2ee0556e2e76cc07406f3d843
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:53:59 2012 +0100
xf86: make xf86DeleteScreen take a ScrnInfoPtr (v2)
stop passing indices into this function.
v2: drop flags argument.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 58824e414f35682435f15bfe6c4b656bd90b9235
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:48:09 2012 +0100
xf86: fix xf86IsScreenPrimary interface to take a pScrn (API/ABI)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6b4fc1f9d391bcdf7ca288766e49bce60f4635cd
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:18:59 2012 +0100
xserver: convert block/wakeup handlers to passing ScreenPtr (ABI/API) (v2)
Instead of passing an index, pass the actual ScreenPtr. This allows
more moving towards not abusing xf86Screens + screenInfo.
v2: drop the blockData/wakeupData args as per ajax's suggestion.,
fix docs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 790d003de20fb47674420a24dadd92412d78620d
Author: Dave Airlie <airlied@gmail.com>
Date: Wed Apr 11 09:53:14 2012 +0100
xf86/common: remove some more pScrn->pScreen uses
remove some more conversions that appeared after api cleanups.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aac85e18d1dd093f2cad6bd29375e40bd7af0b8f
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:34:53 2012 +0100
ddc: change API to take ScrnInfoPtr (v2)
This removes all xf86Screens usage from ddc code,
it modifies the API for some functions to avoid taking indices.
v2: address Alan's comments about dropping DDC2Init parameter.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit fe3f57b6eaf6860a33876a54f9439f69578f03a5
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:31:26 2012 +0100
vbe: don't use index for VBEInterpretPanelID (API)
Remove use of xf86screens from vbe module.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit abf1965f4ed91529036d3fdb470d6a3ce6f29675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:25:11 2012 +0100
int10/vbe: don't use xf86Screens. (ABI) (v3)
Pass the ScrnInfoPtr instead of the index in the int10 struct.
This saves us using it to dereference xf86Screens.
v2: address Alan's comment to fix struct alignment.
v3: squash in all the int10 fixes, test the vm86 code builds,
after comments by Keith.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 23cca612b4fb5efc33683c7624b803b457387e3d
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:30:18 2012 +0100
xserver: drop index argument to ScreenInit (ABI/API) (v2)
This drops the index argument, its the same as pScreen->myNum,
and its the last major index abuse I can find.
v2: address Alan's review - update docs, fix xwin/xnest/darwin
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 40d360e2d7e832407f3ed64e3a02c27ecc89a960
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:23:01 2012 +0100
xf86: migrate PointerMoved from index to ScrnInfoPtr (ABI/API)
This migrates PointerMoved from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aa60a2f38679d0eeb979a9c2648c9bc771409bf9
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:20:46 2012 +0100
xf86: migrate PMEvent to a ScrnInfoPtr (ABI/API)
This migrates the PMEvent from index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d3f28ef44371ed4a039ffc5dd7eb6408d1269ba2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:18:30 2012 +0100
xf86: migrate SetDGAMode from index to ScrnInfoPtr (ABI/API)
This migrates the SetDGAMode callback from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit baf5e4818a74f2b68c3dfdcc56f54322351039a0
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:14:11 2012 +0100
xf86: migrate ChangeGamma from index to ScrnInfoPtr (ABI/API) (v2)
This migrates the ChangeGamma interface to avoid passing a index.
v2: fix xf86RandR12.c + xf86cmap.c call
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 51e5f90ada929d6b23176090badbb42fdb3fa550
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:11:09 2012 +0100
xf86/exa: migrate index to screen types for EnableDisableFBAccess (ABI/API)
The EXA interface migrates to ScreenPtr,
and the xf86 interface migrated to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 94f1f21d17e86f96d4a54292a399160950087675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:02:11 2012 +0100
xf86: migrate ValidMode callback to ScrnInfoPtr (ABI/API)
This migrates the ValidMode to passing a ScrnInfoPtr instead
of an index.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3f8f18198fed4f39ec805b508a3482e91eea26b2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:59:46 2012 +0100
xf86: migrate SwitchMode to taking ScrnInfoPtr (ABI/API) (v2)
This migrate the SwitchMode interface to take a ScrnInfoPtr
instead of an index.
v2: drop flags.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d06a038a5c49328ab3a8d969d24f9fcd22c63202
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:50:37 2012 +0100
xf86: move AdjustFrame to passing ScrnInfoPtr (ABI/API) (v2)
This converts AdjustFrame code paths to passing a ScrnInfoPtr
instead of an integer index.
v2: drop flags args.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 53d2f8608ffd4090d08e7d5cf2e92fb954959b90
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:41:27 2012 +0100
xf86: modify FreeScreen callback to take pScrn instead of index. (ABI/API) (v2)
Another index->pScrn conversion.
v2: drop flags arg.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 60db37c0b247052e0f5c54b1921fe58a3609c2e3
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:35:41 2012 +0100
xf86: change EnterVT/LeaveVT to take a ScrnInfoPtr (ABI/API break) (v2)
This modifies the EnterVT/LeaveVT interfaces to take a ScrnInfoPtr
instead of an index into xf86Screens. This allows dropping more
public dereferences of the xf86Screens and screenInfo.
v2: drop flags args as suggested by Keith, fix docs.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 06729dbbc804a20242e6499f446acb5d94023c3c
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:04:59 2012 +0100
xserver: remove index from CloseScreen (API/ABI breakage)
This drops the index from the CloseScreen callback,
its always been useless really, since the pScreen contains it.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This macro did lookups via privates but we can just use the ScreenToScrn
conversion instead.
This patch drops all in-server uses, we should drop the macro later,
once drivers have been converted to not use it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just simple conversion to use the lookup function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just use new macros to access scrn->screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
migrate to new helper API.
This just wraps all the obvious uses of xf86Screens[pScreen->myNum],
and should be fairly simple to review.
v2: remove commented out lines.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to generate a 256-entry ramp in [0,65535] which covers the full
range, one must mupliply eight-bit values not by 256 but rather by 257.
Many years back – well before the RANDR extension was written, and
before xorg@fdo – a similar bug fix was made to the DIX for converting
client-supplied eight-bit color values into sixteen-bit values.
Noticed by: Elle Stone and Graeme Gill.
Signed-off-by: James Cloos <cloos@jhcloos.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Clears gcc warning in every file that includes xf86Modes.h:
xf86Modes.h:102:1: warning: redundant redeclaration of 'xf86ValidateModesFlags'
xf86Modes.h:72:1: note: previous declaration of 'xf86ValidateModesFlags' was here
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
At least one revision of the AAO reports a 190x110mm maximum size but a
451x113mm mode.
X.Org Bug 41141 <https://bugs.freedesktop.org/show_bug.cgi?id=41141>
Signed-off-by: Ross Burton <ross@linux.intel.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
245cb8e94f fixed xf86RotateDestroy() to actually run its teardown
code, causing the Damage object to properly be re-allocated after a
server regeneration. However the block that does that still thinks the
Rotate layer BlockHandler is wrapped from the last generation, meaning
the shadow pixmap is never re-allocated and the Damage object is never
re-registered, causing a blank screen, and potentially a driver crash
on the next teardown after the server asks it to free a 0x0 Pixmap.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If you started an X server with no connected outputs, we pick a default
1024x768 mode, however if you then ran an xvidmode using app against that
server it would segfault the server due to not finding any valid modes.
This was due to the no output mode set code, only adding the modes to the
scrn->modes once, when something called randr 1.2 xf86SetScrnInfoModes would
get called and remove all the modes and we'd end up with 0.
This change fixes xf86SetScrnInfoModes to always report a scrn mode of at
least 1024x768, and pushes the initial configuration to just call it instead
of setting up the mode itself.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=746926
I've seen other bugs like this on other distros so it might also actually fix them.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
It's fairly common to have multiple, identical monitors plugged in. In
that case, it's preferable to run the monitor's preferred mode on each
output, rather than just matching the width & height and end up with
different timings or refresh rates.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
For Zaphod mode screen crossing handling we need to know the size of all
screens together (i.e. the whole desktop size). Store that in the screenInfo to
have it readily available in events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Driver may change screen pixmaps after page flipping that would then
make damage lose track of the root pixmap.
Using root window for shadow damages fixes the problem because
SetWindowPixmap is implemented in shadow code.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the driver can handle the crtc transform in hardware, it sets
crtc->driverIsPerformingTransform, which turns off both the shadow
layer and the cursor's position-transforming code. However, some
drivers actually do require the cursor position to still be
transformed in these cases. Move the cursor position transform into a
helper function that can be called by such drivers.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
If a driver can use hardware to handle the crtc transform, then
there's no need for the server's shadow layer to do it. Add a crtc
flag that lets the driver indicate that it is handling the transform.
If it's set, consider the transformed size of the screen but don't
actually enable the shadow layer. Also stop adjusting the cursor
image and position.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
