v2: Cover more paths, spotted by Daniel Stone.
v3: pass down the mode field for movement mode.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The removal of the double-use will cause some suble bugs as some conditions
to check for the dev->u.master case were broken and also evaluated as true
if lastSlave was set (instead of master).
Also breaks the input ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
This is not a straightforward search/replacement due to a long-standing
issue.
dev->u.master is the same field as dev->u.lastSlave. Thus, if dev is a master
device, a check for dev->u.master may give us false positives and false
negatives.
The switch to IsFloating() spells out these cases and modifies the
conditions accordingly to cover both cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
These two were sideeffects of lastSlave being in the same field as the
master. For devices generated by the master device directly, lastSlave was 0
and the device would (with the old checks) be interpreted as floating.
Add the required checks to safeguard against master devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Note sure why this is in if 0 but it's been that way since 2007.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Push into the respective devices. This should have no functional changes
since we never warp more than one device at a time. In the glorious future
with true multithreading, still the better thing to do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Which makes it useless, so remove it.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The extra SourceValidate calls from damageCopyArea and damageCopyPlane
can be removed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
miSpriteBlockHandler takes about 10us in arm each time BlockHandlers are
called. To eliminate that overhead from xserver side only register the
BlockHandler when there actually is any cursor down.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
There is no need to have damage handler registered when there isn't any
pointer in the screen. This avoids some overhead from damage handling
which takes tens of microseconds on arm.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
SCREEN_EPILOGUE should read the current function pointer from screen
after calling wrapped function in case the pointer changes.
Passing pPriv to macros instead of asking dix each time makes sense when
both macros need same pointer.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The subtype in the DGA event is the core type and all ET_ event types (where
applicable) are identical to the core types. Thus the switch statement below
will work as required and assign the right master device.
Fixes a crasher bug on keyboard devices with valuators. If a device sends a
motion event while grabbed and a DGA client is active (but has not selected
input through DGA), the valuator event is posted through the VCK and
eventually results in a NULL-pointer dereference on dev->valuator.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Lines of length greater than 46340 can be drawn with one of the
coordinates being negative. However for dashed lines, miPolyBuildPoly
overflows the int type when setting up edges for a section of the
dashed line. This results in the dashed segments not being drawn at
all.
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
event_size is never assigned to in mieqProcessInputEvents(), so realloc()
is always called. This is benign, but I'm guessing not intended.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This replaces dixCreatePrivateKey and the only uses, which were in
midispcur.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The caller is required to have validated the GC for the drawable before
calling any ops, including PolyGlyphBlt.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
pBSReg is always NULL, so the statement after the conditional will never be
reached.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
We should update the serial number even if we just change a single field.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Having miPointerMove and miPointerMoved is confusing, especially since both
do the same thing bar the event delivery. Also, miPointerMove calls
miPointerMoved which indicates some confusion in the temporal alignment of
cause and effect.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This reverts commit 9120e58556.
Whoops, please revert this patch -- overlay is in use in nvidia drivers,
and it's too late in release cycle to remove it.
I feel really sorry that I kept this patch in my tree. I will submit
another one, removing only XAA overlay hooks which are not used at all.
The only reference to it in server and drivers is in XAA overlay code which
would segfault as no miInitOverlay is called ever. No segfaults were observed
"in wild", so XAA overlay is probably also unused.
XAA code is modified to act as if miOverlayCopyUnderlay always returned false,
because XAACopyWindow8_32 could only set doUnderlay to true if it's called from
miOverlayMoveWindow or miOverlayResizeWindow, which can only be called if
miInitOverlay has hooked those functions, and no driver (on fd.o) or server code
calls that.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
midispcur was abusing the CursorScreenKey to index the cursor_bits
privates, it also had a MAXSCREENS array of keys to index device
privates. Switch both of these to the new dixCreatePrivateKey API and
store a pointer to that in the screen private.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The CursorScreenKey array is supposed to be used by the DDX for cursor
private data, but midispcur was abusing it to hold cursor bits private
information. Create a separate set of privates for the dispcur cursor
bits information.
This also renames the device private index and macros to better
reflect their usage:
miDCSpriteKey -> miDCDeviceKey
MIDCBUFFER -> miGetDCDevice
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
