This gets the server to link with xshmfence again, and also ensures
that the miSyncShm code is linked into the server with the reference
from sdksyms.
Signed-off-by: Keith Packard <keithp@keithp.com>
APM support in the Xserver was used to restore the console mode
prior to a power management event. This was to ensure the mode
upon suspend/resume was one that the system firmware or kernel
could deal with.
APM support is now largely obsolete, KMS drivers don't require a
mode restoration anyhow. Therefore it should be possible to disable
this feature.
(small modification by keithp - move test for XF86PM flag after check
for APM, then move XF86PM flag to xorg-config.h.in)
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ACPI support in the Xserver was used to restore the console mode
prior to a power management event. This was to ensure the mode
upon suspend/resume was one that the system firmware or kernel
could deal with.
The feature depended on acpid to be running. Most of this functionality
is now take over by systemd, KMS drivers don't require a mode restoration
anyhow. Therefore it should be possible to disable this feature under
some circumstances.
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Provides both a software implementation using timers and driver hooks
to base everything on vblank intervals.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds DRM compatible fences using futexes.
Uses FD passing to get pixmaps from DRM applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
94ed0ba1b5 moved backtracing into the DIX, so
this comment is outdated. since no-one noticed and it's easier to just grep
than update file references, remove the comment.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Fix Automake warning: AC_OUTPUT should be used without arguments.
www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Files
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We now expect to be linked against something that provides the GL API,
instead of manually grubbing about in the DRI driver's dispatch table.
Since the GLX we expose calls GL functions that are meant to be looked
up dynamically, also add a way to thunk through to GetProcAddress.
This includes a refresh of the generated sources, which requires a
correspondingly new Mesa.
The GetProcAddress stubs are at the moment merely enough to make this
link against Mesa 9.2, but should really be provided for everything not
in the OpenGL 1.2 ABI.
v2: Explicitly hide the GetProcAddress stubs so we can't conflict with
libGL symbols; fix leading tab/space issues [anholt]
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mesa doesn't ship DRI1 drivers as of 8.0, which is about 18 months and
three releases ago. The main reason to have wanted DRI1 AIGLX was to
get a GLX compositor working, but DRI1's (lack of) memory management API
meant that the cost of a GLX compositor was breaking direct GLX apps,
which isn't a great tradeoff.
Of the DRI1 drivers Mesa has dropped, I believe only mga stands to lose
some functionality here, since it and only it has support for
NV_texture_rectangle. Since that's required for every extant GLX
compositor I know of, I conclude that anybody with a savage, say, would
probably not notice AIGLX going away, since they wouldn't be running a
GLX compositor in the first place.
In the future we'd like to use GL in the server in a more natural way,
as just another EGL client, including in the GLX implementation itself.
Since there's no EGL implemented for DRI1 drivers, this would already
doom AIGLX on DRI1 (short of entirely forking the GLX implementation,
which I'm not enthusiastic about).
v2: Remove DRI1 from AIGLX conditionals in configure.ac [anholt]
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Replaces old use of floatMode attribute with new, extended range of
values in __DRI_ATTRIB_RENDER_TYPE. Also adds new conditions, where the
float modes support requires it. Enables support for not only float
configs, but packed float configs as well.
v2 (idr): Whitespace and formatting fixes. Refactor render type
vs. pbuffer checking to a separate function that includes a quote from
the spec. Re-write commit message. Fix compiler warnings:
glxdricommon.c: In function 'glxConvertConfigs':
glxdricommon.c:212:35: warning: pointer targets in passing argument 3 of 'core->getConfigAttrib' differ in signedness [-Wpointer-sign]
glxdricommon.c:212:35: note: expected 'unsigned int *' but argument is of type 'int *'
glxdricommon.c:230:35: warning: pointer targets in passing argument 3 of 'core->getConfigAttrib' differ in signedness [-Wpointer-sign]
glxdricommon.c:230:35: note: expected 'unsigned int *' but argument is of type 'int *'
Signed-off-by: Daniel Czarnowski <daniel.czarnowski@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Commits a1d41e311c, 7d859bd878 & 3ed2c6e112 made extinit.h require
the XF86 Big Font, XRes & ScrnSaver proto headers, but failed to add them
to the SDK_REQUIRED_MODULES so pkg-config would find them for driver builds.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Require new xcb-xf86dri to get fixed GetDrawableInfo.
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Julien Cristau <jcristau@debian.org>
v2: Massive, conflict-filled rebase. I think I resolved everything
right, but this host xv code makes my eyes bleed. Touch-tested XV
after the rebase (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
v2: Dropped the hostx_load_keymap changes, now that that function is
gutted (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Move pseudoramiX code to a separate top-level directory. Link Xwin and Xquartz
with libPseudoramiX
I'm not sure moving this to a top-level directory is appropriate, but I'm not
sure where else it fits.
Future work: pseudoramiX can probably be consolidated with the rrxinerama code
(which I think provides fake xinerama data when real XINERAMA is disabled and we
only have one screen)
v2: fix distcheck
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Replace hardcoded SVR4 || linux || CSRG_BASED with an autoconf check and
the _POSIX_SAVED_IDS macro.
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Check for python at configure time when building XWin with AIGLX, it's used to
generate the wrapper code for native GL functions.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
XQuartz already conditionally renames main() as dix_main() so it can provide
it's own main(). This isn't the ideal way of doing this, as it prevents libdix
built this way from being useful with any other DDX.
So instead, always name that function dix_main(), and also provide a stub main()
which just calls dix_main(), which can be overriden in the DDX.
Add a main() to XWin (XQuartz already has one, of course).
It's no longer neccessary to link XWin and XQuartz with libmain.
v2: Remove unneeded stub main hw/xwin/InitOutput.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Simplifies code and reduces risk of overflow from converting length
field in X replies from words to bytes.
One call to _XEatData is left in ephyrHostGLXGetStringFromServer where
it's already been checked for overflow, and other values have been
subtracted from it to reduce the size of data remaining to be eaten.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reduces risk of overflow from converting length field in X replies
from words to bytes. (Also seems to be what several calls were
already incorrectly passing to _XEatData.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
If both are missing, input device hotplugging will not work out of the box.
While we still have a DBus-API or the user may want to set AAD off all the
time, the most likely source of this is misconfiguration (i.e. lack of the
udev/hal devel packages).
Message printed last to make it more obvious to the user.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This picks up support for Xi pointer barriers in the protocol.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
libnettle is smaller than libgcrypt, currently being released more
frequently, and has replaced the latter in gnutls-3.x (which is used
by TigerVNC, so they can avoid pulling in two crypto libraries
simultaneously).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
As for Cygwin, define FD_SETSIZE for uses of select() to be correct.
Link with libpthread.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
All this does is make it so editing configure.ac or Makefile.am doesn't
rebuild the makefiles. Which is just stupid.
v2: Remove --enable-maintainer-mode from autogen.sh
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some compilers have difficulty with the previous implementation which
relies on undefined behavior according to the C standard. Using
offsetof() from <stddef.h> (which most likely just uses
__builtin_offsetof on modern compilers) allows us to accomplish this
without ambiguity.
This fix also requires support for typeof(). If your compiler does not
support typeof(), then the old implementation will be used. If you see
failures in test/list, please try a more modern compiler.
v2: Added fallback if typeof() is not present.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We've had reports of two copies of the GLX bits, one in the server
and one in libglx.so causing problems, I didn't understand why the
X server needed a copy so drop it, however then we have to fix a missing
GlxExtensionInit that comes from sdksyms, so work around it by moving
that one declaration into a header that sdksyms doesn't scan.
Thanks to Jon Turney for debugging the actual problem.
(copyright header from extinit.h that seems most appropriate put on top).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52402
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XAA was the only consumer.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 0c6987df in June 2008 disabled XAA offscreen pixmaps per default,
as they were broken, leaving XAA only able to accelerate operations
directly on the screen pixmap and nowhere else, eliminating acceleration
for basically every modern toolkit, and any composited environment.
So, it hasn't worked for over four years. No-one's even come close to
fixing it.
RIP.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Not to be confused with XFree86Loader or XorgLoader. Which are both now
dead too.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than building the tiny amount of code required for XFree86-DRI as
an external module, build it in if it's enabled at configure time.
v2: Fix test/Makefile.am to only link libdri.la if DRI is set
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
fixup for DRI1 move
Signed-off-by: Keith Packard <keithp@keithp.com>
Now that libXextmodule.la is both empty and unused, we can just build
the one libXext.la for everyone, rather than having Xorg be special and
unique.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
extmod was originally a big pointless module. Now it's an empty,
pointless module. This commit makes it unexist.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than languishing in its own special module, move RECORD into the
core server.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If DBE support is compiled in the server, just man up and build it into
the server, rather than having it as an external module.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
On Linux in order for future hotplug work, we are required to interface
to udev to detect device creation/removal. In order to try and get
some earlier testing on this, this patch adds the ability to use
udev for device enumeration on Linux.
At startup the list of drm/kms devices is probed and this info is
used to load drivers.
A new driver probing method is introduced that passes the udev
device info to the driver for probing.
The probing integrates with the pci probing code and will fallback
to the pci probe and old school probe functions in turn.
The flags parameter to the probe function will be used later
to provide hotplug and gpu screen flags for the driver to behave
in a different way.
This patch changes the driver ABI, all drivers should at least
be set with a NULL udev probe function after this commit.
v2: rename to platform bus, now with 100% less udev specific,
this version passes config_odev_attribs around which are an array
of id/string pairs, then the udev code can attach the set of attribs
it understands, the OS specific code can attach its attrib, and then
the core/drivers can lookup the required attribs.
also add MATCH_PCI_DEVICES macro.
This version is mainly to address concerns raised by ajax.
v3: Address comments from Peter.
fix whitespace that snuck in.
rework to use a linked list with some core functions that
xf86 wraps.
v4: add free list, fix struct whitespace.
ajax this address most of your issues?
v5: drop probe ifdef, fix logic issue
v6: some overhaul after more testing.
Implement primaryBus for platform devices.
document hotplug.h dev attribs - drop sysname attrib
fix build with udev kms disabled
make probing work like the PCI probe code,
match against bus id if one exists, or primary device.
RFC: add new bus id support "PLAT:syspath". we probably
want to match on this a bit different, or use a different
property maybe. I was mainly wanting this for use with
specifying usb devices in xorg.conf directly, but PLAT:path
could also work I suppose.
v6.1: add missing noop platform function
v7: fix two interactions with pci probing and slot claiming, prevents
pci and platform trying to load two drivers for same slot.
v8: test with zaphod mode on -ati driver, fixup resulting issue
clean up common probe code into another function, change busid
matching to allow dropping end of strings.
v9: fix platform probing logic so it actually works.
v9.1: fix pdev init to NULL properly.
v10: address most of Keith's concerns.
v4 was thanks to Reviewed-by: Adam Jackson <ajax@redhat.com>
v5 was Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The Solaris linker recently added a -z parent flag for easier checking
of symbol definitions in plugins against the program that loads them.
If that's present, this enables it, along with -z defs to error on
undefined symbols to alert us if any modules call symbols that won't
be found at runtime.
This builds upon, and requires, the recent Cygwin work to build Xorg.
It moves a couple more modules to be after the Xorg binary in the build
order so that they can find the binary to check against, much as the
Cygwin changes did (these would be modules built on Solaris but not
Cygwin).
v2: This version only sets the flags for the xorg-server build itself,
and does not yet export them in xorg-server.pc to the drivers, since
most of the drivers are not ready to build with -no-undefined yet.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Link XWIN with GLX_SYS_LIBS, just like all the other DDXs
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Bump dri2proto dependency to 2.7.
Bump DRI2INFOREC_VERSION to 7.
This new protocol request effectively allows clients to perform feature
detection on the DDX. The request was added in DRI2 protocol 1.4.
If I had DRI2GetParam in June 2011, when I was implementing support in the
Intel DDX and Mesa for new hardware that required a new DRI2 attachment
format, then I could have avoided a week of pain caused by the necessity
to write a horrid feature detection hack [1] in Mesa. In the future, when
the work begins to add MSAA support to the Intel DDX, having a clean way
to do feature detection will allow us to avoid revisiting and expanding
that hack.
[1] mesa, commit aea2236a, function intel_verify_dri2_has_hiz
v2: If driver doesn't define ds->GetParam, dont' crash. Fall back to
default behavior, per keithp.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net> (v1)
Reviewed-by: Ian Romanick <idr@freedesktop.org> (v1)
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
v2: Bump glproto version to 1.4.15. This patch uses structure names
that only exist in that glproto version and later. Noticed by
Christopher James Halse Rogers.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Both Cygwin and MinGW can use Windows' native CryptoAPI for SHA1,
saving a dependency on libgcrypt or OpenSSL. The necessary functions
are in ADVAPI32.DLL, which is among the default lib flags and is
already used in hw/xwin for accessing the registry.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
ws2_32 is the correct name for the libary (even on 64 bit Windows :-))
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
If the target platform isn't in a list of platforms we know don't use a
setuid binary, we try to test if we can chown something to root.
This test possibly won't give the right answer if we are cross-compiling,
which is common for the MinGW target. This patch adds MinGW to the list
of platforms we know don't use a setuid binary.
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
The MITSHM extension uses SYSV IPC, but even if configure's test
for IPC failed, MITSHM was still enabled by default, breaking
MinGW builds by default.
Unfortunately, fixing this exposes the fact that the HAVE_SYSV_IPC
test wasn't being used for anything before and so we hadn't noticed it
was failing on Cygwin.
Change from using SHM_W|SHM_R flags (which aren't required by POSIX) to
S_IRUSR|S_IWUSR flags (which are)
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Same as the default configuration for Cygwin, --disable-xorg and --disable-dmx DDX by default,
and force --disable-xv and other unsupported extensions
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
As a PE platform, all symbols in both EXEs and DLLs must be resolved
at link time. As Xorg modules depend on symbols in the Xorg
executable, we must build Xorg before its modules, creating an implib
from the former which is used to link the latter. This implib must
then be installed in order to build the drivers.
Currently only two drivers are supported on Cygwin: xf86-video-dummy
(to replace Xvfb/Xfake) and xf86-video-nested (to replace Xnest/Xephyr).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This will be necessary to port Xorg to Cygwin, but other platforms may
find this useful as well.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
grab_window and touchid were removed from the struct for ABI compatibility
reasons, we need to pull in the new, XI 2.2-specific struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is provided by dixmods/libshadow.so and is not part of the main binary.
This addresses a build failure on darwin due to MIEXT_SHADOW_LIB having
unsatisfied dependencies (FB_LIB) in XORG_LIBS.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Uses kvm_getargv() from libkvm.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows us to run the server as a normal user whilst still
being able to use the -modulepath, -logfile and -config switches
We define a xf86PrivsElevated which will do the checks and cache
the result in case it is called more than once.
Also renamed the paths #defines to match their new meaning.
Original discussion which led to this patch can be found here:
http://lists.freedesktop.org/archives/xorg-devel/2011-September/025853.html
Signed-off-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Michal Suchanek <hramrach at centrum.cz>
Reviewed-by: Jamey Sharp <jamey at minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
We do the same thing for libraries and optional modules already, and it's
much easier to read when one of them changes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
