Looping around LoadExtension() meant that ExtensionModuleList was reallocated
on every extension. Using LoadExtensionList() we pass an array thus the
function can do the reallocation in one go, and then loop and setup the
ExtensionModuleList.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
v2: Update ephyr [Keith Packard]
v3: Eliminate const warnings in LoadExtensionList [Keith Packard]
Signed-off-by: Keith Packard <keithp@keithp.com>
Without these, after commit fdb4ec86c2, it fails to build on Solaris,
with errors of:
xf86Xinput.c: In function 'xf86stat':
xf86Xinput.c:816:5: error: implicit declaration of function 'major' [-Werror=implicit-function-declaration]
xf86Xinput.c:817:5: error: implicit declaration of function 'minor' [-Werror=implicit-function-declaration]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
So that the fd in use test in systemd_logind_release_fd works properly.
Note we cannot change the test inside systemd_logind_release_fd as it must
work for devices which were never added to the xf86InputDevs too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
config_odev* functions are called in code-paths were we already use
XNF* functions in other places, so which are not oom safe already.
Besides that oom is something which should simply never happen, so aborting
when it does is as good a response as any other.
While switching to XNF functions also fixup an unchecked strdup case.
Note the function prototypes are kept unchanged, as they are part of the
server ABI.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Only devices from the config backend have their attributes set, devices from
the xorg.conf only have Option "Device". That option is also set by the
config backend, so use it.
And since the config backend sets our major/minor but xorg.conf devices don't
have that set, make sure we try to stat it first where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This makes how we handle video drivers identical to what we do for input
drivers, and this should make live easier for old non kms drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
And use it from xf86platformAddDevice too, instead of directly calling
drvp->platformProbe.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
With systemd-logind we cannot probe input devices while switched away, so
if we're switched away, put the pInfo on a list, and probe everything on
that list on VT-Enter.
This is using an array grown by re-alloc, rather than a xorg_list since
creating a new data-type to store a pInfo + list-entry just for this seems
overkill.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits makes the changes necessary outside of the systemd-logind core
to make the server use systemd-logind managed fds for input devices and drm
nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits add the bulk of the systemd-logind integration code, but does
not hook it up yet other then calling its init and fini functions, which
don't do that much.
Note the configure bits check for udev since systemd-logind use will only be
supported in combination with udev. Besides that it only checks for dbus
since all communication with systemd-logind is happening over dbus, so
no further libs are needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for drm nodes.
This commit adds a fd member to OdevAttributes to store the fd to pass it
along to the driver.
systemd-logind tracks devices by their chardev major + minor numbers, so
also add OdevAttributes to store the major and minor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The OdevAttributes struct should just be a head of the attributes list, and
not contain various unrelated flags. Instead add a flags field to
struct xf86_platform_device and use that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add a couple of new functions for dealing with storing integer values into
OdevAttributes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a config_odev_get_attribute helper, and replace the diy looping over all
the attributes done in various places with calls to this helper.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for input devices.
This commit adds a new capabilities field to the InputDriverRec and a
XI86_DRV_CAP_SERVER_FD flag for drivers to indicate that they support server
managed fds.
This commit adds a new XI86_SERVER_FD flag to indicate to drivers when the
server is managing the fd and they should not open/close it. Note that even
if drivers declare they support server managed fds there is no guarantee they
will actually get them.
Since this changes the input driver ABI, this commit bumps it.
systemd-logind tracks devices by their chardev major + minor numbers, since
we are breaking ABI anyways also add major and minor fields for easy storage /
retrieval of these.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Just for consistency, I'm pretty sure the code is generally not happy for
malloc failures anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Only Xorg -configure uses a hardcoded value here, so let's not change the rest
of the server for that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The only place this isn't allocated is during Xorg -configure where we just
statically assing "mouse"/"kbd" and the identifiers for it. Everywhere else
it's strdup'd and then free'd already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Allocated in one place, freed in another.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This reverts commit 22592855e9.
What warning was this supposed to fix?
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Just forcing everything to const char* is not helpful, compiler warnings are
supposed to warn about broken code. Forcing everything to const when it
clearly isn't less than ideal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Factor this code out into functions so that it can be re-used for the
systemd-logind device pause/resume paths.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Use kernel goto style error handling for xf86VTSwitchAway() failure. This
makes it much easier to read the straight path.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind the dbus-core will be used for more then just config, so
it should be possible to build it even when using a non dbus dependent config
backend.
This patch also removes the config_ prefix from the dbus-core symbols.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Updated patch following Hans de Goede's advice.
If -seat option is passed with a value different from seat0,
X server won't call xf86OpenConsole().
This is needed to avoid any race condition between seat0 and
non-seat0 X servers. If a non-seat0 X server opens a given VT
before a seat0 one which expects to open the same VT, one can
get an inactive systemd-logind graphical session for seat0.
This patch was first tested in a multiseat setup with multiple
video cards and works quite well.
I suppose it can also make things like DontVTSwitch and -sharevts
meaningless for non-seat0 seats, so it may fix bug #69477, too.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=71258https://bugs.freedesktop.org/show_bug.cgi?id=69477 (maybe)
See also: http://lists.x.org/archives/xorg-devel/2013-October/038391.htmlhttps://bugzilla.redhat.com/show_bug.cgi?id=1018196
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Flagged by cppcheck 1.62:
[hw/xfree86/common/xf86Helper.c:220] -> [hw/xfree86/common/xf86Helper.c:231]:
(warning) Possible null pointer dereference: pScrn - otherwise it is
redundant to check it against null.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
defaultFontPath is now a const char * so that it can be initialized
from a string constant. This patch kludges around that by inserting
suitable casts to eliminate warnings. Fixing this 'correctly' would
involve inserting some new variables and conditionals to use them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Make lots of string pointers 'const char' so that we can use constant
strings with them without eliciting warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This avoids compiler warnings when initializing with string constants.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
On UEFI machines you'd prefer fbdev to grab efifb instead of vesa trying
to initialize and failing in a way we can't unwind from. On BIOS
machines this is harmless: either there is an fbdev driver and it'll
probably be more capable, or there's not and vesa will kick in anyway.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
... unless you explicitly disabled it with -bs on the command line, or
with the corresponding thing in xorg.conf.
v2: Drop a bogus hunk from compChangeWindowAttributes [vsyrjala]
v3: s/TRUE/WhenMapped/ [jcristau]
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Since we're using RedirectAutomatic to do this, we don't actually
preserve contents when unmapped.
v2: Don't say WhenMapped if Composite didn't initialize [vsyrjala]
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A call to Xrandr SetScreenConfig (for randr 1.1) causes the Xserver to
crash when xf86SetViewport() which does not check if the hardware is
accessible.
Wrap accesses to xf86SetViewport() with if (vtSema) { ... } to avoid that.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When enabling/disabling input handlers in xf86VTSwitch() we treat Input-
and GeneralHandlers equally. The result is that after a VT switch the
masks for EnabledDevices and AllSockets are equal and the distiction
between both types is lost.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
DMPS calls dixSaveScreens() when turned off but not when turned
on. In most cases this is irrelevant as DPMS is done when a
key is hit in which case dixSaveScreens() will be called to
unblank anyhow. This isn't the case if we use xset (or the
DPMS extension directly) to unblank.
Check screenIsSaved to make sure the state needs to be changed
before calling dixSaveScreens().
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
After fc3ab84d the pVideo field in DevToConfig[i] is no longer
initialized, so it's always NULL. This causes the duplicate finding
algorithm in the beginning of the function to not work anymore as it
is based on this field.
The symptom of this bug is that X -configure reports
Number of created screens does not match number of detected devices.
Configuration failed.
Server terminated with error (2). Closing log file.
rather than producing a working config file.
This patch fixes that bug by initializing the field before calling
xf86PciConfigureNewDev().
Cc: tvignatti@gmail.com
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Send RRResourceChangeNotify event when provider, output or crtc was created or
destroyed. I.e. when the list of resources returned by RRGetScreenResources and
RRGetProviders changes.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As of server 1.13, systems with DRM and Udev will have BUS_PLATFORM as
their primary bus type. However, drivers not implementing a
platformProbe function will still create entities of type BUS_PCI. We
need to account for this when checking for the primary entity.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Acked-by: Tormod Volden <debian.tormod@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>