Split ChangeMasterDeviceClasses into an extra XISendDeviceChangedEvent that
assembles the XI2 wire event for the DeviceChanged event. Re-use this when
detaching the last SD.
Not quite perfect yet, we still copy the device classes from the slave now
rather than from the data we had when the event occured. But it's a start.
(We can now unexport SizeDeviceInfo and CopySwapDevices, not needed anymore)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All XI2 requests have XI prefixes.
Requests affected:
ChangeDeviceCursor
QueryDevicePointer
WarpDevicePointer
SetClientPointer
GetClientPointer
XIChangeDeviceHierarchy.
The masks were originally designed to generically handle event masks for
extensions. Since all that is in-server anyway, it's much better writing
custom event masks for those extensions that need it and not providing a
unified mechanism.
XI2 needs more than the current implementation, which is already too complex
for most other extensions. good riddance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keeping an AllExtensionVersions array to save all versions of
all extension is rather pointless if only one extension uses it.
Rename to XIVersion, reduce to a single struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
They end up being the same anyway on startup, so let's not have a dynamic mask
assignment mechanism and instead just hardcode them already.
Also unexport SelectForWindow and remove the valid_masks parameter. We can
check that before calling, since there's only one caller anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
Really, this was a bad idea. It's not security, the UI features that would
have been cool (e.g. clicking through windows) aren't implemented anyway, and
there's nothing you can't achieve just by using plain XI anyway.
Requires inputproto 1.9.99.6.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
When the opcode squash happened in the protocol, the processing vector got out
of sync for a few requests. As a result, client and server would interpret
requests differently, leading to a couple of BadLength problems.
Remember the version the client sent to us, so we can adjust our replies
accordingly. This requires the client to use the {major|minor}Version fields
in the GetExtensionVersion request. However, they were padding before, so we
must assume they are garbage if nbytes is non-zero. If nbytes is zero, the
client is probably a new client and we can handle it correctly.
If we have one global filter, one pointer may change the filter value and
affect another pointer.
Reproduceable effect:
blackbox and xterm, start dragging xterm then click anywhere with the other
pointer (attached to different masterd device!). The button release resets
the filter[Motion_Filter(button)] value, thus stopping dragging and no event
is sent to the client anymore.
Having the filters set per device gets around this.
Each time a different slave device sends through a master, an
DeviceClassesChangedEvent is enqueued. When this event is processed, all
classes of the matching master device are changed, and the event is sent to
the clients.
Next time the master is queried, it thus shows the evclasses of the last slave
device. The original classes are stored in the devPrivates.
TODO: if all slave devices are removed, the master's original classes need to
be restored.
