Use $(SHELL) to run it. Someone may want to build out of a source tree
in a filesystem with the noexec mount flag set.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This does not really handle hotplug (it's handled inside the kernel,
by the 'mux' devices), but uses the wscons console driver
configuration to figure out the keyboard layout and the list of
pointing devices found by the kernel.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
The xorg.conf manual uses the following convention in most of its
sections:
bold = text to be copied literally to the config file,
italic = a symbolic name to be substituted by a true value.
Some configuration keywords seem to have been changed into generic
options. Prepending Option to the manual entry swapped the
bold-italic logic. This patch restores the convention in the monitor
section and consists of
-.BI "Option " "\*qPreferredMode\*q " \*qstring\*q
+.BI "Option \*qPreferredMode\*q \*q" name \*q
modifications.
Plus a few minor changes (Modes → Mode) and a typo fix.
Signed-off-by: Servaas Vandenberghe
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Recent changes to the server change the default absolute input device
behaviour on zaphods to span the whole desktop too. Since these setups
usually use an xorg.conf, allow the transformation matrix to be specified in
the config as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
In all cases, the pointer was simply type-cast anyway. Let's get some
compile-time type safety going, how about that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Squashed in:
xfree86: Move definition of xf86OptionPtr into separate header file
The pile of spaghettis that is the xfree86 include dependencies make it
rather hard to have a single typedef somewhere that's not interfering with
everything else or drags in a whole bunch of other includes.
Move the xf86OptionRec and GenericListRec declarations into a separate
header.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Swapping the wrong size was never caught because swap{l,s} are macros.
It's clear in the case of Xext/xres.c, that the author believed
client_major/minor to be CARD16 from looking at the code in the first
hunk.
v2: dmx.c fixes from Keith.
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
DDX can now implement validation for swap_limit changes to prevent
configurations that are not support in driver.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
CC: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This allows ddx to set swap_limit if there is more than one back
buffer for drawable. Setting swap_limit has to also check if change
affects a client that is blocked.
This can be used to implement N-buffering in driver with minimal
logic in allocation and selecting next back.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
ReuseBufferNotify hook is called whenever old buffer is reused in DRI2
code.
Driver can use this hook to rewrite the buffer name if hardware requires
shared buffers. Shared buffer might be some hardware limited resources like
framebuffer that is preallocated in boot.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Dear,
A patch I posted on xorg-devel was reviewed and is ready for
inclusion in xserver. Would you be willing to apply the patch so that
it finds its way into the master branch ?
Thank you, Servaas Vandenberghe.
http://lists.x.org/archives/xorg-devel/2011-August/024769.htmlhttp://lists.x.org/archives/xorg-devel/2011-August/024777.html
This patch adds printing of the DisplayMode type bits to
xf86PrintModeline(). It helps to trace the modeline origin and to
understand the initial configured modeline.
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Signed-off-by: Servaas Vandenberghe
Signed-off-by: Keith Packard <keithp@keithp.com>
The video driver ABI was bumped to 11.0 in commit
0de7cec907 because of a change to the
size of ATOM in commit 51f353d0a0. This
also affects extension modules, so the extension ABI version should
have been bumped too.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fortunately, the massive decrease in the cost of whitespace in the past
decade has allowed us to be much more generous with it, and much more
consistent in its application, even for code like this that clearly no
one has ever tried to read.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Use new per-screen privates API instead.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Alan Coopersmith explains:
XmuSnprintf() can be replaced by snprintf() now. (It was a
implementation X provided for it's libraries to use in the days
before all platforms we cared about had snprintf in libc.)
Reported-by: walter harms <wharms@bfs.de>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This field was never read at any time in the git history.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Also fix up XineramaInitData's caller, XineramaReinitData.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Stop duplicating in each os-support variant before it gets replicated
even further.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Throughout the xserver git history, the generic portion of the int10
module has always used other methods for reading the video BIOS. For
some time now it's been purely libpciaccess based. This commented-out
use of xf86ReadBIOS is entirely superfluous.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Patch produced with:
unifdef -UNO_INLINE -B
This change isn't relevant to the similar code in
hw/xfree86/common/compiler.h, because x86emu is expected to someday move
out of xserver entirely and so should not depend on any xserver headers.
Also, some platforms apparently do have NO_INLINE versions of
compiler.h.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
InputOptions is not switched to use struct list for a future patch to unify
it with the XF86OptionRec.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 43d9edd31e.
This commit was introduced in the 1.2 cycle when hotplugging was less than
ideal (i.e. it didn't exist). From the commit message:
Always add a mouse driver instance configured to send core events, unless
a core pointer already exists using either the mouse or void drivers. This
handles the laptop case where the config file only specifies, say,
synaptics, which causes the touchpad to work but not the pointing stick.
We don't double-instantiate the mouse driver to avoid the mouse moving twice
as fast, and we skip this logic when the user asked for a void core pointer
since that probably means they want to run with no pointer at all.
To get this case above, a user would need to disable hotplugging _and_ have a
xorg.conf that only references one device. This is possible, but not a use-case
we should worry about too much now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Add support for multi-seat-aware input device hotplugging. This
implements the multi-seat scheme explained here:
http://www.freedesktop.org/wiki/Software/systemd/multiseat
This introduces a new X server switch "-seat" which allows configuration
of the seat to enumerate hotplugging devices on. If specified the value
of this parameter will also be exported as root window property
Xorg_Seat.
To properly support input hotplugging devices need to be tagged in udev
according to the seat they are on. Untagged devices are assumed to be on
the default seat "seat0". If no "-seat" parameter is passed only devices
on "seat0" are used. This means that the new scheme is perfectly
compatible with existing setups which have no tagged input devices.
Note that the -seat switch takes a completely generic identifier, and
that it has no effect on non-Linux systems. In fact, on other OSes a
completely different identifier scheme for seats could be used but still
be exposed with the Xorg_Seat and -seat.
I tried to follow the coding style of the surrounding code blocks if
there was any one could follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Slowly merging the vastly different code-paths.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, just readability improvements. This also gets rid of
the count variable. Count was just used for resizing the null-terminated
list. Since we're not in a time-critical path here at all we can afford to
loop the list multiple times instead of keeping an extra variable around.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
If we find the core device, move all other device pointers forward right
then and there. The break will jump out of the top loop.
They had a special on braces today, so I added some for readability (and
fixed up tab vs space indentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes.
The options we assign are the ones from the Pointer/Keyboard device so we
might as well use those readable names instead of dev[count-1]->options.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices are core pointers/keyboards by default now anyway, but let's set the
option to some value instead of just NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
It doesn't matter. All devices are core pointer devices by default now
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes assertion failure when calling dixSetPrivate
Debian bug#632549 <http://bugs.debian.org/632549>
Reported-and-tested-by: Mohammed Sameer <msameer@foolab.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
