If the event is an XI event, we need to work on the correct device, not on
the VCK.
Adds XIGetDevice(event) function to extract the device from an event.
Really, this was a bad idea. It's not security, the UI features that would
have been cool (e.g. clicking through windows) aren't implemented anyway, and
there's nothing you can't achieve just by using plain XI anyway.
Requires inputproto 1.9.99.6.
These weren't even being used, which isn't overly surprising, given that
they were already in the struct.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The current code exposes to inconsistent updates, i.e. if handler N succeeds
but handler N+1 fails in setting the property, an error is returned to the
client although parts of the server now behave as if the property change
succeeded.
This patch adds a "checkonly" parameter to the SetProperty handler. The
handlers are then called twice, once with checkonly set to TRUE.
On the checkonly run, handlers _MUST_ return error codes if the property
cannot be applied. Handlers are not permitted to actually apply the changes.
On the second run, handlers are permitted to apply property changes.
Errors codes returned on the second run are ignored.
A property can only be deleted if any of the following is true:
- if a property is deletable and all handlers return Success.
- if a property is non-deleteable and the all handlers return Success AND the
delete request does not come from a client (i.e. driver or the server).
A client can never delete a non-deletable property.
Now that the code has been fixed so that Unmap means unmap and not "don't
remap", 'remap' was confusing to have in the function names/parameters, so
change it to simple 'map'.
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes yet another xalloc() each server generation. Also, I
couldn't find the corresponding xfree() so I guess that used to be a
memory leak there.
This was to account for cases where you had video and print screens in
the same server. Lunacy. Leave the slot in ScreenInfo, but rename it,
and stop looking at it.
OsInitColors always just returned TRUE, so just remove calls to it and
insane special-case logic. Remove unused kcolor.c implementation, and
merge oscolor.h into oscolor.c since it was the only user. Remove
open-coded strncasecmp in oscolor.c.
Since we no longer need to call OsInitColors after reading the config
file, just call PostConfigInit() from one place, and move PM handling to
one place so we can install the signal handlers earlier.
Add strncasecmp (as we're now using it) in case someone doesn't have it,
and also change strncasecmp args to be const, in accordance with
everything else.
We may need more than one handler to deal with a property (e.g. one in the
driver, one in the DIX), so get the handlers into a linked list and call them
one-by-one. This is of course slightly less entertaining than the hilarious
WRAP/UNWRAP game we play in other parts of the server.
XIRegisterPropertyHandler/XIUnregisterPropertyHandler are the interface
drivers/the DIX should use to attach themselves to the device.
XIDeleteAllDeviceProperties destroys everything, including the handlers.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Using id = 0 only worked pre-MPX since XInput didn't allow XOpenDevice for the
core devices (0 and 1). Now we can now legally register for events so we may
overwrite our device-independent classes with the ones selected for the VCP.
So, increase the EMASKSIZE to MAX_DEVICES + 1 and use MAX_DEVICES as the ID
when we don't have a device.
Spiritual revert of 1fa4de80fc. Intel's C
compiler claims to be gcc-compatible; if they're not defining the same
macros as gcc then that's their bug, not ours. Even if we were to do
this aliasing we should do it once and for all in servermd.h.
Mixing usage where some parts of the code treated this field as a bitmask
and other parts as an array of card8 was wrong, and as the wire protocol
wanted bitmasks, it was less invasive to switch the newer counting code use
booleans.
Master devices track slave buttons by waiting for all slave buttons to be
released before delivering the release event to the client.
This also removes the state merging code in DeepCopyDeviceClasses -- that
code was changing master device state without delivering any events,
violating protocol invariants. The result will be that existing slave
button state which does not match the master will not be visible through the
master device. Fixing this would require that we synthesize events in this
function, which seems like a bad idea. Note that keyboards have the same
issue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
This code hasn't been updated with anything even resembling what anyone is
shipping in nearly thirty months. It hasn't built out of the box since
7.1. Most of its features over AIGLX are accomplished with DRI2 and
friends.
We only have one set of default rules options in xkb. When the second keyboard
is brought up with Xkb options specified, these new options overwrite the old.
In future server generations, the rules used for the VCK are a mixture of the
default ones and ones previously specified for other keyboards. Simply
resetting the xkb default rules to NULL avoids this issue.
Reproducable by setting XkbLayout "de" and XkbVariant "nodeadkeys". In the
second server generation, the VCK has "us(nodeadkeys)". This again produces a
SIGABRT when the first key is hit.
I could not figure out why the SIGABRT happens. This patch is avoiding the
issue rather than fixing it.
Add each event to the master's MH as well as to the SDs. In the MD, store
min/max and the actual value. When retrieving the MH, rescale all coordinates
to the current coordinate range and only post those valuators that are
currently active on the device.
Since we can't predict how many valuators may be in a future SD attached to an
MD, we need to preallocate a history buffer that is large enough to keep
MAX_VALUATORS coordinates per event.
In addition, the history buffer needs to memorize the coordinate ranges at the
time, thus requiring MDs to store (min_val, max_val, current_val, time)
instead of (current_val, time) for each motion history entry.
This commit only fixes the allocation.
With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
Assuming master->last.valuators is in screen coords, SD's are always in device
coordinates.
1. If an event comes in, scale masters->last to the device, drop into device's
last->valuators.
2. Apply motion from the actual event
3. Scale back to screen coords, check if we may need to cross screens
4. Drop screen coords into master->last
5. Rescale to device coords, drop into deviceValuator event and SD->last
6. Drop screen coords into ev->root_x/y
Whoopee...
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
After UpdateDeviceState, the device has the current position in absolute
coordinates, the event has the correct valuator data to be delivered to the
client.
Remember the version the client sent to us, so we can adjust our replies
accordingly. This requires the client to use the {major|minor}Version fields
in the GetExtensionVersion request. However, they were padding before, so we
must assume they are garbage if nbytes is non-zero. If nbytes is zero, the
client is probably a new client and we can handle it correctly.
This extension provided bug-compatibility with pre-X11R6, but has been
stubbed out in our server since 2006 to return BadRequest when you actually
asked for it.
A few pieces of code were abusing this define for other purposes, which are
converted to #ifndef DEBUG instead. There should be no ABI consequences
to this change.
The rationale is that having the define in xorg-server.h also disables
assert() drivers, which is unexpected, and also difficult to avoid since
xorg-server.h is included in their config.h, and you can't put a #undef in
config.h. As for removing it from the server instead of moving it to an
internal header, we probably shouldn't have unnecessary assert()s in
critical server paths anyway, and if we do we could #define NDEBUG in the
specific cases needed.
Instead of a simple counter, use bits to keep track of which device is where
etc. When device enters a window (or sets focus), the bit matching the device
is set, when it leaves again, it is unset. If there are 0 bits set, then
Leave/Enter/Focus events may be sent to the client.
Same theory as before, but this should get around the insanity with
Grab/Ungrab special cases. Those cases are basically untested though.
If input processing is frozen, only wrap realInputProc: don't smash
processInputProc as well. When input processing is thawed, pIP will be
rewrapped correctly.
This supersedes the previous workaround in 50e80c9.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Evaluating the address of a BoxRec as a boolean gives this warning:
i830_driver.c:2317: warning: the address of 'ScreenBox' will always
evaluate as 'true'
which is pretty annoying. This patch compares the address to NULL to
avoid the pointer->bool conversion and gets rid of the warning. Seems
like a lame hack, but the warning is worse.
To recap: the original XC-SECURITY extension disallowed background "None" if
the window was untrusted. XACE 1.0 preserved this check as a hook function.
XACE pre-2.0 removed the hook and first abolished background "None entirely,
then restored it as a global on/off switch in response to Bug #13683.
Now it's back to being per-window, via a flag instead of a hook function.
The latter is used to increase the amount of allocated memory for the event
list. This will be needed for ClassesChangedEvents that can be of more or less
arbitrary size (larger than 32 anyway).
Rather than letting the DDX allocate the events, allocate them once in the DIX
and just pass it around when needed.
DDX should call GetEventList() to obtain this list and then pass it into
Get{Pointer|Keyboard}Events.
Sorry about the megacommit, but this touches on a lot of stuff.
Get rid of XkbFileInfo, which was pretty seriously redundant, and move the
only useful thing it had (defined) into XkbDescRec. defined will be removed
pretty soon anyway. Is the compat map pointer non-NULL? Then you have a
compat map, congratulations! Anyhow, I digress.
All functions that took an XkbFileInfoPtr now take an XkbDescPtr, _except_
XkmReadFile, which returns an XkbDescPtr *, because people want to deal in
XkbDescPtrs, not XkbDescRecs.
We need to start breaking the XKB API to enforce sanity, so drag whichever
headers we need to do so into the server tree, as the client API is set in
stone, being part of Xlib.
If two devices are attached to the same master device, pressing button 1 on
each of them leads to two button presses from the same device. Some apps
really don't like that.
So we just put a counter in place and only send the first press and the last
release.
In some cases (triggered by a key repeat during a sync grab) XKB unwrapping
can overwrite the device's realInputProc with the enqueueInputProc. When the
grab is released and the events are replayed, we end up in an infinite loop.
Each event is replayed and in replaying pushed to the end of the queue again.
This fix is a hack only. It ensures that the realInputProc is never
overwritten with the enqueueInputProc.
This fixes Bug #13511 (https://bugs.freedesktop.org/show_bug.cgi?id=13511)
(cherry picked from commit eace88989c)
In some cases (triggered by a key repeat during a sync grab) XKB unwrapping
can overwrite the device's realInputProc with the enqueueInputProc. When the
grab is released and the events are replayed, we end up in an infinite loop.
Each event is replayed and in replaying pushed to the end of the queue again.
This fix is a hack only. It ensures that the realInputProc is never
overwritten with the enqueueInputProc.
This fixes Bug #13511 (https://bugs.freedesktop.org/show_bug.cgi?id=13511)
If we have one global filter, one pointer may change the filter value and
affect another pointer.
Reproduceable effect:
blackbox and xterm, start dragging xterm then click anywhere with the other
pointer (attached to different masterd device!). The button release resets
the filter[Motion_Filter(button)] value, thus stopping dragging and no event
is sent to the client anymore.
Having the filters set per device gets around this.
We free the ValuatorClassRec quite regularly. If a SIGIO is handled while
we're swapping device classes, we can bring the server down when we try to
access lastx/lasty of the master device.
Turns out it's really really hard synchronising device state across multiple
duplicated events if they all share the same struct. So instead of doing so,
when the SD changes deep-copy all it's classes into the MD. The MD then has
the same capabilities, but the state can be set separately. This should fix
xkb, key state, repeat etc. problems.
Updating the device state allows us to remove the SwitchCoreKeyboard from the
event gathering, it's all done during event processing now.
These hints allow an acceleration architecture to optimize allocation of certain
types of pixmaps, such as pixmaps that will serve as backing pixmaps for
redirected windows.
If we inherited a signal mask from the parent process that ignores SIGUSR1,
then we will send SIGUSR1 to the parent to indicate when we're ready to
accept connections. Unfortunately, we send this notification way too
early, right after creating the sockets rather than just before entering
the main loop.
Move it to just before Dispatch() so we're not lying quite so much.
The smart scheduler itimer currently always fires after each request
(which in turn causes the CPU to wake out of idle, burning precious
power). Rather than doing this, just stop the timer before going into
the select() portion of the WaitFor loop. It's a cheap system call, and
it will only get called if there's no more commands batched up from the
active fd.
This change also allows some of the functions to be simplified;
setitimer() will only fail if it's passed invalid data, and we don't do
that... so make it void and remove all the conditional code that deals
with failure.
The change also allows us to remove a few variables that were used for
housekeeping between the signal handler and the main loop.
Signed-off-by: Keith Packard <keithp@koto.keithp.com>
XI events can now take the same processing paths as core events, and should do
the correct state changes etc.
There's some cases where XKB will use KeyPress as type for an event to be
delivered to the client. Stuck warnings in, not sure what the correct solution
is yet.
(cherry picked from commit 6334d4e7be with some
additional compile fixes and non-MPX adaptations)
using a hardcoded ProcessKeyboardEvent. Otherwise we lose the ability to
process DeviceKeyEvents after the first key press.
This should be the correct fix now.
(cherry picked from commit 4d5df14f2c)
Using a global array for action filters is bad. If two keyboard hit a modifier
at the same time, releaseing the first one will deactivate the filter and
thus the second keyboard can never release the modifier again.
(cherry picked from commit bfe6b4d2d9)
the hook - the hook only needs the Atom to control access to the selection
object. Upgraded the SelectionCallback to take a client argument and
additional type codes so that it can be used for redirection.
Set isMaster for VCP/VCK.
Init sprites for master pointer devices.
Pair master kbds with master pointers (1:1 pairing!).
Attach other devices to VCP/VCK.
For now, we don't allow attaching slaves to other slaves, and we don't allow
pairing slaves with other slaves.
Pairing is for master keyboard->master pointer only.
Attaching is for slave device->master device only.
"master" points to the device this device is attached to. Event sent by the
device will also be routed through the master.
master and spriteOwner are mutually exclusive.
* configure.ac,include/dix-config.h.in: define the XEPHYR_DRI macro.
define it when --enable-xephyr and --enable-dri are both turned on.
* hw/kdrive/ephyr/XF86dri.c: copy this from mesa source to enable
Xephyr to talk DRI protocol the host X. In mesa, this is used by libGL.so to
talk DRI protocol with the server.
* hw/kdrive/ephyr/ephyr.c: finally initialise the DRI extension
in the ephyrInitScreen() function.
* hw/kdrive/ephyr/ephyrdri.c,ephyrdriext.c: safeguard the compilation
using the XEPHYR_DRI macro.
* dix/events.c, include/dix.h:
(UpdateSpriteForScreen): added this to update the mouse sprite context
when we switch from a pScreen to another.
* mi/mipointer.c:
(miPointerWarpCursor): as we are switching to a new pScreen,
don't forget to update the mouse sprite context.
Removes "LookupKeyboardDevice" and "LookupPointerDevice" in favor of
inputInfo.keyboard and inputInfo.pointer, respectively; all use cases
are non-XI compliant anyway.
Let the drivers only generate XI events and put those into the event queue.
When processing events, generate core events as needed. This fixes a number of
problems with XKB and the DIX in general.
The previous approach was to put core events and XI events as separate events
into the event queue. When being processed, the server had no knowledge of
them coming from the same device state change. Anything that would then change
the state of the device accordingly was in danger of changing it twice,
leading to some funny (i.e. not funny at all) results.
Emulating core events while processing XI events fixes this, there is only one
path that actually changes the device state now. Although we have to be
careful when replaying events from synced devices, otherwise we may lose
events.
Note: XI has precedence over core for passive grabs, but core events are
delivered to the client first.
This removes the wrapping added in 340911d724
