When setting crtc->gamma_size to randr_crtc->gammaSize we should
use randr_crtc->gammaSize to allocate new gamma table in crtc.
Currently, if randr_crtc->gammaSize > crtc->gammaSize the subsequent
memcpy will overwrite memory beyond the end of gamma table.
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mark mips64 as 64bit
Use long as PORT_SIZE
Signed-off-by: YunQiang Su <wzssyqa@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Ok, that's embarassing -- I didn't even make sure Adam's patch
compiled. These are minimal fixes to make it build.
Signed-off-by: Keith Packard <keithp@keithp.com>
Somewhat shocking how much simpler this is, isn't it? We no longer need
to wrap the screen or GC or Picture, because damage does it for us,
which is doubly great since the old shadowfb code didn't wrap _enough_
things (border updates and Render glyphs, at least). The only real
difference now between this and shadow is a) shadow will let you track
arbitrary pixmaps, and b) shadow's update hook runs off the BlockHandler
whereas shadowfb is immediate.
Tested on nouveau.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes Piglit test "swapbuffersmsc-return swap_interval 0".
Ensure that *swap_target gets initialized on any 'return Success' path,
even if the swap request can't be completed by the driver and the server
falls back to a simple blit. That path can also be triggered by setting
swap_interval to 0, which disables sync to vertical retrace.
We originally found this bug because for some reason SDL2 automatically
sets swap_interval to 0, when we were trying to test OML_sync_control in
an SDL2 test application. We then discovered that the above-mentioned
Piglit test has been failing for the same reason since it was
introduced.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
swap_target is an out-parameter that needs to be set to the value that
SBC will take on after this SwapBuffers request completes.
However, it was also being used as a temporary variable to hold the MSC
at which the SwapBuffers request got scheduled to occur. This confusion
makes it harder to reason about whether swap_target is being set
correctly for its out-parameter usage. (Hint: It isn't.)
For the latter use, it makes more sense to use the existing target_msc
variable, which already has the right value unless target_msc, divisor,
and remainder are all 0, in which case we can set it using swap_interval
as usual.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This was added for DRM_IOCTL_SET_VERSION support, which has been around
for over ten years now. Since we require ≥2.3.0 in configure.ac this
would really only protect you if you managed to build against a modern
libdrm but run against one that's more than 7½ years old, which, doctor
it hurts when I do this.
Archaeology: http://cgit.freedesktop.org/~ajax/dri/commit/xc/programs/Xserver/GL/dri/dri.c?id=77d62efca033dced96ab7998b7c62a4e2df907d5
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Handle the unported case by issuing a build-time and run-time warning.
And add support for FreeBSD kernel based systems, by using the
VT_GETINDEX ioctl to check if the file descriptor is on a virtual
console.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not printing the program name produces very confusing messages that
might be difficult to attribute while trying to diagnose problems,
let's be explicit about who we are.
Also add a missing "/" between SUID_WRAPPER_DIR and "Xorg.bin".
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The libdrm.pc file gives us the correct include path, do not try to
hardcode it on the source, as it might vary on the installed system,
for example on Debian-based systems it's under /user/include/libdrm/.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
load_cursor_argb() may need to be able to fail and have the server fall back
to a software cursor in at least the following circumstances.
1) The hardware can only support some ARGB cursors and this does not just
depend on cursor size.
2) Virtual hardware may not wish to pass through a cursor to the host at a
particular time but may wish to accept the same cursor at another time.
This patch adds a return value to the API and makes the server do the
software fall-back on failure.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
An X11 client may need to know whether the X server virtual terminal is
currently the active one. This change adds a root window property which
provides that information. Intended interface user: the VirtualBox Guest
Additions.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When no logfile was specified (xf86LogFileFrom == X_DEFAULT) and we're not
running as root log to $XDG_DATA_HOME/xorg/Xorg.#.log as Xorg won't be able to
log to the default /var/log/... when it is not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather then a full path prefix, this is a preparation patch for adding
support for logging to another location when not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Include os.h for ErrorF() to fix implicit-function-declaration warnings when
configured with --enable-debug.
hw/xfree86/parser/DRI.c: In function 'xf86parseDRISection':
hw/xfree86/parser/DRI.c:87:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
hw/xfree86/parser/Extensions.c: In function 'xf86parseExtensionsSection':
hw/xfree86/parser/Extensions.c:77:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Build fbcmap_mi.c once, rather than once for each DDX, and make it part of libfb
or libwfb convenience library.
Since 84e8de1271 we don't have fbcmap.c
This is a sort of revert of 17d85387d1
v2: Remove libkdrivestubs.la from configure.ac
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
When we're using server managed-fds through systemd-logind, systemd-logind
*must* keep running while we are using it, as it does things like drmSetMaster
and drmDropMaster for us on vt-switch.
On a systemd-logind restart, we cannot simply re-connect since we will then
get a different fd for the /dev/dri/card# node, and we've tied a lot of
state to the old fd. I've discussed this with the systemd people, and in the
future there may be a restart mechanism were systemd-logind passed fds from
the old logind to the new logind. But for now there answer is simply:
"Don't restart systemd-logind", and there never really is a good reason to
restart it.
So to ensure unpleasentness if people do decide to restart systemd-logind
anyways (or when it crashes), monitor logind going away and make this a fatal
error. This avoids getting a hard-hung machine on the next vt-switch and will
hopefully quickly educate users to not restart systemd-logind while they have
an X session using it active.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
All files specified in AC_CONFIG_FILES get distributed automatically.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Looping around LoadExtension() meant that ExtensionModuleList was reallocated
on every extension. Using LoadExtensionList() we pass an array thus the
function can do the reallocation in one go, and then loop and setup the
ExtensionModuleList.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
v2: Update ephyr [Keith Packard]
v3: Eliminate const warnings in LoadExtensionList [Keith Packard]
Signed-off-by: Keith Packard <keithp@keithp.com>
Without these, after commit fdb4ec86c2, it fails to build on Solaris,
with errors of:
xf86Xinput.c: In function 'xf86stat':
xf86Xinput.c:816:5: error: implicit declaration of function 'major' [-Werror=implicit-function-declaration]
xf86Xinput.c:817:5: error: implicit declaration of function 'minor' [-Werror=implicit-function-declaration]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
So that the fd in use test in systemd_logind_release_fd works properly.
Note we cannot change the test inside systemd_logind_release_fd as it must
work for devices which were never added to the xf86InputDevs too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
InputDevices may share a single device-node, this happens ie with Wacom
tablets.
This patch makes take_fd and release_fd properly deal with this, together
with the earlier patch for updating the fd in all matching xf86InputDevs
on pause / resume this completes support for such shared device-nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
And use it where appropriate.
Setting the fd for all matching InputDevices is necessary when we've
multiple InputDevices sharing a single device-node, such as happens with
Wacom tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a preparation patch for adding support for server managed fds
for InputDevices where multiple input devices share the same device node (and
thus also their major and minor).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Modify systemd_logind_find_info_ptr_by_devnum to take a start argument, so
that it can be used to find all occurences of a devnum in an InputInfo list,
rather then just the first.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that there are more callers but those were already not doing any
error checking.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
config_odev* functions are called in code-paths were we already use
XNF* functions in other places, so which are not oom safe already.
Besides that oom is something which should simply never happen, so aborting
when it does is as good a response as any other.
While switching to XNF functions also fixup an unchecked strdup case.
Note the function prototypes are kept unchanged, as they are part of the
server ABI.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With the recent systemd-logind changes it is possible to install the Xorg
binary without suid root rights and still have everything working as it
should *if* the user only has cards which are supported by kms.
This commit adds a little suid root wrapper, which is a bit weird, first we
strip the suid-root bit of the Xorg binary, and then we add a wrapper ?
The function of this wrapper is to see if a system still needs root-rights,
if it does not (it supports kms and the kms drivers are properly loaded),
then it will immediately drop all elevated rights before executing the real
Xorg binary. If it finds (some) cards which don't support kms, or no cards
at all, then it will execute the Xorg server with elevated rights so that
ie the nvidia binary driver and the vesa driver can keep working normally.
To make it possible for security concious users who don't need the root
rights to completely remove the wrapper, Xorg is started in a 3 step process
when the wrapper is enabled during build time:
1) A simple shell script which checks if the wrapper is there, if it is
it executes the wrapper, if not it directly executes the real Xorg binary
2) The wrapper gets executed, does its checks, normally drops all elevated
rights and then executes the real Xorg binary
3) The real Xorg binary does its thing
This allows distributions to put the wrapper binary in a separate package, and
will allow users to remove this package. IE the plan with Fedora is to make
"legacy" drivers depend on the wrapper pkg, and since our default install
contains some legacy drivers it will be part of the default install, but
users can later yum remove it (which will also automatically remove the
legacy driver packages as those won't work without it anyways).
The wrapper is loosely modelled after the existing Debian Xwrapper, it
uses the same config-file + config-file format, and also allows restricting
Xserver execution (through the wrapper) to console users only.
There also is a new needs_root_rights config file directive, which can
be used to override the auto-detection the wrapper does.
Hopefully this will allow Debian to replace their own wrapper with this
upstream one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Only devices from the config backend have their attributes set, devices from
the xorg.conf only have Option "Device". That option is also set by the
config backend, so use it.
And since the config backend sets our major/minor but xorg.conf devices don't
have that set, make sure we try to stat it first where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This makes how we handle video drivers identical to what we do for input
drivers, and this should make live easier for old non kms drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
And use it from xf86platformAddDevice too, instead of directly calling
drvp->platformProbe.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
If there is only a single non kms video device (tested with the vesa driver),
then we will never get a resume signal for a drm node, so also call vtenter
when we get a resume for an input device.
Notes:
1) vtenter checks if it is ok to do the vtenter, so if there are kms video
devices the calls for input device resumes are a nop
2) This assumes that there will always be at least one server event fd
supporting input device. Since all non legacy input-drivers will be patched
to supported server fds this seems a safe assumption.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The render-nodes case is untested.
v2: Add a flag for wayland to suppress the native DRI3 support.
Wayland isn't running as a master itself, so it can't do the auth
on its own and has to ask the compositor to do it for us. Dropped
XXX about randr provider -- the conclusion from discussion with
keithp was that if the driver's dri3_open for a provider on a
different screen, that's a core dri3 bug.
v3: Don't put quite so much under GLAMOR_NO_DRI3, and add a comment
explaining what this is about.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Porting this code to be non-xorg-dependent is going to take
significant hacking, so just dump it in the glamoregl module for the
moment, so I can hack on it while regression testing.
v2: Fix compiler warnings by adding #include dix-config.h at the top,
don't try to auto-init (I'll try to fix the xv ABI later).
v3: Fix last minute breakage of having reintroduced xf86ScrnToScreen
(one of the compat macros). Just use the drawable's pScreen instead.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is not exposing the API we want long term, but it should get
existing DDX drivers up and running while we massage the API into
shape.
v2: Use LIBADD instead of LDFLAGS to fix deps on libglamor.la, and use
version 0.5.1 (the point it was forked from the external repo).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Try to get a server managed fd from the Options before trying to open the
device node ourselves.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind we cannot probe input devices while switched away, so
if we're switched away, put the pInfo on a list, and probe everything on
that list on VT-Enter.
This is using an array grown by re-alloc, rather than a xorg_list since
creating a new data-type to store a pInfo + list-entry just for this seems
overkill.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits makes the changes necessary outside of the systemd-logind core
to make the server use systemd-logind managed fds for input devices and drm
nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits add the bulk of the systemd-logind integration code, but does
not hook it up yet other then calling its init and fini functions, which
don't do that much.
Note the configure bits check for udev since systemd-logind use will only be
supported in combination with udev. Besides that it only checks for dbus
since all communication with systemd-logind is happening over dbus, so
no further libs are needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for drm nodes.
This commit adds a fd member to OdevAttributes to store the fd to pass it
along to the driver.
systemd-logind tracks devices by their chardev major + minor numbers, so
also add OdevAttributes to store the major and minor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The OdevAttributes struct should just be a head of the attributes list, and
not contain various unrelated flags. Instead add a flags field to
struct xf86_platform_device and use that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
