Some games (namely openttd) will raise an XError and fail with a
BadValue if their request to XF86VidModeSetViewPort fails.
Support only the default zoom and viewport, fail for everything else.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some applications (e.g. using lwjgl) try to parse the output of the
xrandr command and get confused with the mode name returned by Xwayland,
because it contains "@[frequency]" (e.g. "1024x640@60.0Hz").
Remove the @[frequency] part of the mode name to match what is found in
usual mode names on regular X servers to please those applications.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94589
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We had HAVE_POSIX_FALLOCATE checks, but no such macros were ever
defined anywhere. This commit makes it so that this macro is defined if
the posix_fallocate is detected during configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
On output removal, the CRTC that was added in xwl_output_create()
is not removed in xwl_output_destroy() and would cause a segmentation
fault later on in ProcRRGetMonitors():
(EE) Segmentation fault at address 0x100000001
(EE)
(EE) 10: ? (?+0x29) [0x29]
(EE) 9: /usr/bin/Xwayland (_start+0x29) [0x423299]
(EE) 8: /lib64/libc.so.6 (__libc_start_main+0xf0) [0x7fdd80e7f580]
(EE) 7: /usr/bin/Xwayland (dix_main+0x3b3) [0x544ef3]
(EE) 6: /usr/bin/Xwayland (Dispatch+0x31e) [0x54109e]
(EE) 5: /usr/bin/Xwayland (ProcRRGetMonitors+0x9b) [0x4ca18b]
(EE) 4: /usr/bin/Xwayland (RRMonitorMakeList+0x269) [0x4c9ba9]
(EE) 3: /usr/bin/Xwayland (RRMonitorSetFromServer+0x118) [0x4c9198]
(EE) 2: /usr/bin/Xwayland (MakeAtom+0x30) [0x530710]
(EE) 1: /lib64/libc.so.6 (__restore_rt+0x0) [0x7fdd80e93b1f]
(EE) 0: /usr/bin/Xwayland (OsSigHandler+0x29) [0x5792d9]
Remove the output CRTC in xwl_output_destroy() to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Older games (mostly those based on SDL 1.x) rely on the XVidMode
extension and would refuse to run without.
Add a simple, limited and read-only xvidmode support that reports the
current mode used so that games that rely on xvidmode extension can run
on XWayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Prefix the temporary file names used for allocating pixmaps with
"xwayland-" instead of "weston-". This makes it less confusing while
looking at the file names of the currently open fds of the Xwayland
process.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The last cursor frame we commited before the pointer left one of our
surfaces might not have been shown. In that case we'll have a cursor
surface frame callback pending which we need to clear so that we can
continue submitting new cursor frames.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This adds support to Xwayland to try and use OpenGL core
profile for glamor first.
v1.1: use version defines.
v2: let glamor work out core profile itself.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Replace the block/wakeup handler with a NotifyFd callback instead.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When unplugging an output, it's still listed in xrandr and the size
of the root window still includes the removed output.
The RR output should be destroyed when its Wayland counterpart is
destroyed and the screen dimensions must be updated in both the done
and the destroy handlers.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92914
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
In Wayland, a client (in this case XWayland) should set the cursor
surface when it receives pointer focus. Not doing this will leave the
curser at whatever it was previously.
When running on XWayland, the X server will not be the entity that
controls what actual pointer cursor is displayed, and it wont be notified
about the pointer cursor changes done by the Wayland compositor. This
causes X11 clients running via XWayland to end up with incorrect pointer
cursors because the X server believes that, if the cursor was previously
set to the cursor C, if we receive Wayland pointer focus over window W
which also has the pointer cursor C, we do not need to update it. This
will cause us to end up with the wrong cursor if cursor C was not the
same one that was already set by the Wayland compositor.
This patch works around this by, when receiving pointer focus, getting
the private mipointer struct changing the "current sprite" pointer to
an invalid cursor in order to trigger the update path next time a cursor
is displayed by dix.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Otherwise the server may try to draw onto the root window when closing
down, but when running rootless the root window has no storage thus
causing a memory corruption.
Thanks to Adam Jackson <ajax@redhat.com> for helping tracking this down!
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93045
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Marek Chalupa <mchqwerty@gmail.com>
check return values of RR.*Create calls
v2. do not bail out if we don't have any output
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
don't leak memory when realizing window fails
v2. take care of all memory allocation and return values,
not just one leak
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
wl_keyboard::enter is the equivalent of FocusIn + KeymapNotify: it
notifies us that the surface/window has now received the focus, and
provides us a set of keys which are currently down.
We should use these keys to update the current state, but not to send
any events to clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a pixmap isn't getting exported as a dmabuf, then we don't need to
make an EGLImage/GBM bo for it. This should reduce normal pixmap
allocation overhead, and also lets the driver choose non-scanout
formats which may be much higher performance.
On Raspberry Pi, where scanout isn't usable as a texture source, this
improves x11perf -copypixwin100 from about 4300/sec to 5780/sec under
xcompmgr -a, because we no longer need to upload our x11perf window to
a tiled temporary in order to render it to the screen.
v2: Just use pixmap->usage_hint instead of a new field. Drop the
changes that started storing gbm_bos in the pixmap priv due to
lifetime issues.
v3: Fix a missing gbm_bo_destroy() on the pixmap-from-fd success path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
One less layering violation (EGL should call glamor, if anything, not
the other way around).
v2: Move glamor.c's DestroyPixmap wrapping up above the
glamor_egl_screen_init() call, since glamor.c's DestroyPixmap
needs to be the bottom of the stack (it calls fb directly and
doesn't wrap). Caught by Michel.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When we have a single output, just set it to the physical size of that
output. Otherwise try to approximate it calculating a mean m.m. per
dot. Last fallback is to default to 96 DPI.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When a new output is hot-plugged we need to not only update our internal
screen dimensions, but also the dix screen dimensions, screenInfo
dimensions and the root window dimensions.
https://bugs.freedesktop.org/show_bug.cgi?id=92273
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
While we have keyboard focus, the server's xkb code is already locking
and latching modifiers appropriately while processing keyboard
events.
Since there is no guaranteed order between wl_keyboard key and
modifiers events, if we got the modifiers event with a locked or
latched modifier and then process the key press event for that
modifier we would wrongly unlock/unlatch. To prevent this, we ignore
locked and latched modifiers while any of our surfaces has keyboard
focus.
But we always need to set the xkb group index since this might be
triggered programatically by the wayland compositor at any time.
Reviewed-by: Daniel Stone <daniels@collabora.com>
output.done event can be sent even on some property change, not only
when announcing the output. Therefore we must check if we already have it
otherwise we may corrupt the list by adding it multiple times.
This fixes bug when xwayland looped indefinitely in output.done handler
and that can be reproduced following these steps (under X without
multi-monitor setup):
1) run weston --output-count=2
2) run xterm, move it so that half is on one output
and half on the other
3) close second output, try run weston-terminal
weston sends updated outputs which trigger this bug.
v2. factor out common code into function
move expecting_events into right branch
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
This makes Xwayland correctly handle a monitor getting unplugged.
[Marek]: use xorg_list_for_each_entry_safe
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
snprintf does not allocate memory, so we can never get an out-of-memory
error.
(Also, the error handler would free xwl_output after it was already
registered as an event listener.)
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Commit 2172714c changed behavior of capability handling, but it only
solved part of the problem. If Xwayland is launched without a capability
(e.g. no pointer device is connected when Xwayland was spinned up), and
later that capability comes, the device added will not be automatically
initialized. This patch initializes the device when the capability is
reported for the first time, thus avoiding the problem.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=81819
Signed-off-by: Boyan Ding <stu_dby@126.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is (eventually) called during
InitializeSprite() → *pScreen->SetCursorPosition → miPointerSetCursorPosition
when a device is set to floating. We don't do anything special outselves, but
we need to pass on to the next layer to make sure the device is initialized
properly. Otherwise, pScreen stays NULL and eventually crashes the server when
we try to clean up behind us.
Test case: grab a device → floats it, ungrab again → crash
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When grabbed, the slave device is floating, i.e. the master device is NULL.
CheckMotion() isn't happy with NULL. Make sure we pass the right device in,
either the master device when the device is attached, or the device itself
when it is floating.
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
A DeviceIntPtr with touch valuators is also created in order to deliver
the translated touch events. The lifetime of xwl_touch structs is tied
to the wayland ones, finishing in either wl_touch.up() or wl_touch.cancel()
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This struct holds information about each individual, ongoing touchpoint.
A list of these is held by the xwl_seat.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This was built as a hack for simple Wayland compositors like Weston
which were lazy and didn't want to configure windows server-side when
moved.
Since comboboxes and menus are separate toplevel O-R windows, this hack
breaks input as it needs to be traced normally, not simply sent to the
focused window.
X11 toolkits really do need their windows to be configured correctly
for their O-R windows comboboxes or menus other things, so let's fix
the lazy compositors and remove this.
I have tested this patch with both Weston and Mutter and neither of
them require any changes, and it fixes comboboxes and menus.
If somebody then wants to revert 73698d4, that's fine by me, so we
reduce the amount of API that DDXen have.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
xwayland windows ignored any key repeating settings
advertised by a compositor
v2. don't hardcode version 4 of seat
use AutoRepeatModeOn/Off
v3. use min(version, 4) when binding seat
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
By the time we get here we've already done CloseDownDevices, so on the
second regeneration you get:
Invalid read of size 4
at 0x43402A: RemoveDevice (devices.c:1125)
by 0x427902: xwl_seat_destroy (xwayland-input.c:568)
by 0x42649C: xwl_close_screen (xwayland.c:116)
by 0x4B7F67: CursorCloseScreen (cursor.c:187)
by 0x536003: AnimCurCloseScreen (animcur.c:106)
by 0x539831: present_close_screen (present_screen.c:64)
by 0x43E486: dix_main (main.c:351)
by 0x30D70206FF: (below main) (libc-start.c:289)
Address 0x980e1a0 is 64 bytes inside a block of size 904
at 0x4A07D6A: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x434158: RemoveDevice (devices.c:1157)
by 0x42F77B: CloseDeviceList (devices.c:1017)
by 0x430246: CloseDownDevices (devices.c:1047)
by 0x43E3EB: dix_main (main.c:333)
by 0x30D70206FF: (below main) (libc-start.c:289)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
By the time we get here we've already been through FreeAllResources,
which has already torn down the RANDR objects, so on the second
regeneration you get:
Invalid read of size 4
at 0x51C6F0: RRCrtcDestroy (rrcrtc.c:659)
by 0x4285F5: xwl_output_destroy (xwayland-output.c:191)
by 0x426464: xwl_close_screen (xwayland.c:112)
by 0x4B7F77: CursorCloseScreen (cursor.c:187)
by 0x536013: AnimCurCloseScreen (animcur.c:106)
by 0x539841: present_close_screen (present_screen.c:64)
by 0x43E496: dix_main (main.c:351)
by 0x30D70206FF: (below main) (libc-start.c:289)
Address 0x4cc6640 is 0 bytes inside a block of size 728 free'd
at 0x4A07D6A: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x51BCCF: RRCrtcDestroyResource (rrcrtc.c:689)
by 0x45CD91: doFreeResource (resource.c:872)
by 0x45DE56: FreeClientResources (resource.c:1138)
by 0x45DF06: FreeAllResources (resource.c:1153)
by 0x43E3BD: dix_main (main.c:321)
by 0x30D70206FF: (below main) (libc-start.c:289)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We need this for doing USB offload scenarios using glamor
and modesetting driver.
unfortunately only gbm in mesa 10.6 has support for the
linear API.
v1.1: fix bad define
v2: update the configure.ac test as per amdgpu. (Michel)
set linear bos to external to avoid cache. (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Xwayland opens anonymous files for its sharing buffers, move these
file descriptors out of the range of the client select mask to avoid
reaching the maximum number of clients prematurely.
https://bugs.freedesktop.org/show_bug.cgi?id=91072
Tested-by: Olivier Fourdan <fourdan@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In some extreme cases with animated cursors at a high frame rate we
could end up filling the wl_display outgoing buffer and end up with
wl_display_flush() failing.
In any case, using the frame callback to throttle ourselves is the
right thing to do.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Right now if "-auth" isn't passed on the command line, we let
any user on the system connect to the Xwayland server.
That's clearly suboptimal, given Xwayland is generally designed
to be used by one user at a time.
This commit changes the behavior, so only the user who started the
X server can connect clients to it.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xwayland currently allows wide-open access to the X sockets
it listens on, ignoring Xauth access control.
This commit makes sure to enable access control on the sockets,
so one user can't snoop on another user's X-over-wayland
applications.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix missing newlines from error string and fix grammar.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't even need to simulate button clicks; it's done automatically.
This also fixes scrolling in Qt5 apps.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove these defines as we start to remove support for non-standard
glamor layering as used by the intel driver.
v2: Rebase on the blockhandler change and the Xephyr init failure
change (by anholt), fix stray NO_DRI3 addition to xwayland.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
So that Xwayland gets re-linked each time glamor is modified.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Carlos Olmedo Escobar <carlos.olmedo.e@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
