This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Lots more const char stuff.
Remove duplicate defs of CoreKeyboardProc and CorePointerProc from
test/xi2/protocol-common.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
defmin/defmax are screen coords and thus use a min-inclusive, max-exclusive
range. device axes ranges are inclusive, so bump the max up by one to get the
scaling right.
This fixes off-by-one coordinate errors if the coordinate matrix is used to
bind the device to a fraction of the screen. It introduces an off-by-one
scaling error in the device coordinate range, but since most devices have a
higher resolution than the screen (e.g. a Wacom I4 has 5080 dpi) the effect
of this should be limited.
This error manifests when we have numScreens > 1, as the scaling from
desktop size back to screen size drops one device unit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Obsolete since 4bc2761ad5. This struct
existed so copying a passive grab could be simply done by
activeGrab = *grab
and thus have a copy of the GrabPtr we'd get from various sources but still
be able to check device->grab for NULL.
Since 4bc2761 activeGrab is a pointer itself and points to the same memory
as grabinfo->grab, leaving us with the potential of dangling pointers if
either calls FreeGrab() and doesn't reset the other one.
There is no reader of activeGrab anyway, so simply removing it is
sufficient.
Note: field is merely renamed to keep the ABI. Should be removed in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If drivers supply incorrect values don't just quietly return False, spew to
the log so we can detect what's going on. All these cases are driver bugs
and should be fixed immediately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
InitPointerClassDeviceStruct/InitKeyboardDeviceStruct allocate a
proximity/focus class, respectively. If a driver calls
InitFocusClassDeviceStruct or InitProximityClassDeviceStruct beforehand,
the previously allocated class is overwritten, leaking the memory.
Neither takes a parameter other than the device, so we can simply skip
initialising it if we already have one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
==2547== 1 bytes in 1 blocks are still reachable in loss record 1 of 111
==2547== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2547== by 0x64D1551: strdup (strdup.c:43)
==2547== by 0x4802FB: Xstrdup (utils.c:1113)
==2547== by 0x585B6C: XkbSetRulesUsed (xkbInit.c:219)
==2547== by 0x58700F: InitKeyboardDeviceStruct (xkbInit.c:595)
==2547== by 0x419FA3: vfbKeybdProc (InitInput.c:74)
==2547== by 0x425A3D: ActivateDevice (devices.c:540)
==2547== by 0x425F65: InitAndStartDevices (devices.c:713)
==2547== by 0x5ACA57: main (main.c:259)
and a few more of the above.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
==15562== 1,800 bytes in 1 blocks are definitely lost in loss record 298 of 330
==15562== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==15562== by 0x4312C7: InitTouchClassDeviceStruct (devices.c:1644)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Slave devices don't need these and the matching code in CloseDevice() has a
IsMaster() condition on freeing these, causing a leak.
==16111== 384 bytes in 4 blocks are definitely lost in loss record 72 of 105
==16111== at 0x4C28BB4: calloc (vg_replace_malloc.c:467)
==16111== by 0x42AEE2: AllocDevicePair (devices.c:2707)
==16111== by 0x4BAA27: AllocXTestDevice (xtest.c:617)
==16111== by 0x4BA89A: InitXTestDevices (xtest.c:570)
==16111== by 0x425F5E: InitCoreDevices (devices.c:690)
==16111== by 0x5ACB2D: main (main.c:257)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The transformation matrix we previously stored was a scaled matrix based on
the axis ranges of the device. For relative movements, the scaling is not
required (or desired).
Store two separate matrices, one as requested by the client, one as the
product of [scale . matrix . inv_scale]. Depending on the type of movement,
apply the respective matrix.
For relative movements, also drop the translation component since it doesn't
really make sense to use that bit.
Input ABI 19
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XTest devices are the first ones in the list, being initialised together
with the master devices. If we disable the devices in-order and a device has
a button down when being disabled, the XTest device is checked for a
required button release (xkbAccessX.c's ProcessPointerEvent). This fails if
the device is already NULL.
Instead of putting the check there, disable the devices in the reverse order
they are initialised. Disable physical slaves first, then xtest devices,
then the master devices.
Testcase: shut down server with a button still held down on a physical
device
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Disabling a XTest device followed by an XTest API call crashes the server.
This could be fixed elsewhere but disabled devices must not send events
anyway. The use-case for disabled XTest devices is somewhat limited, so
simply disallow disabling the devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Otherwise:
* We can't end the touches while device is disabled
* New touches after enabling the device may erroneously be mapped to old
logical touches
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The property handler is registered after setting the property, so
dev->transform remains as all-zeros. That causes pixman_f_transform_invert()
to fail (in transformAbsolute()) and invert remains as garbage. This
may then cause a cursor jump to 0,0.
Since the axes are not yet initialized here and we need to allow for drivers
changing the matrix, we cannot use the property handler for matrix
initialization, essentially duplicating the code.
Triggered by the fix to (#49347) in 749a593e49https://bugzilla.redhat.com/show_bug.cgi?id=852841
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since we call directly into XKB and may be doing so before the extension
has been initialised, make sure its privates are set up first. XTest
had a hack to do this itself, but seems cleaner to just make sure we do
it in AllocDevicePair.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In:
commit d792ac125a
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Mon Jul 9 19:12:43 2012 -0700
Use C99 designated initializers in dix Replies
the initializer for the .length element of the xGetPointerMappingReply
structure uses the value of rep.nElts, but that won't be set until
after this initializer runs, so we get garbage in the length element
and clients using it will generally wedge.
Easy to verify:
$ xmodmap -pp
Fixed by creating a local nElts variable and using that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Always initialize to zero, and then if permission is granted, copy
the current key state maps, instead of always copying and then
zeroing out if permission was denied.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
f3410b97cf introduced a regression on server
shutdown. If any button or key was held on shutdown (ctrl, alt, backspace
are usually still down) sending a raw event will segfault the server. The
the root windows are set to NULL before calling CloseDownDevices().
Avoid this by disabling all devices first when shutting down. Disabled
devices won't send events anymore.
Master keyboards must be disabled first, otherwise disabling the pointer
will trigger DisableDevice(keyboard) and the keyboard is removed from the
inputInfo.devices list and moved to inputInfo.off_devices. A regular loop
through inputInfo.devices would thus jump to off_devices and not recover.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
If a sprite-owner is to be disabled but still paired, disable the paired
device first. i.e. disabling a master pointer will disable the master
keyboard first.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Disabled devices don't need sprites (they can't send events anyway) and the
device init process is currently geared to check for whether sprite is
present to check if the device should be paired/attached.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This is a leftover from early MPX days where any keyboard could be paired
with any pointer (before the device hierarchy).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A suspend-induced device disable may happen before the device gets to see
the button release event. On resume, the server's internal state still has
some buttons pressed, causing inconsistent behaviour.
Force the release and the matching events to be sent to the client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Previously, we only had one idle alarm that was triggered for all devices,
whenever the user used any device, came back from suspend, etc.
Add system SyncCounters for each device (named "DEVICEIDLETIME x", with x
being the device id) that trigger on that device only. This allows for
enabling/disabling devices based on interaction with other devices.
Popular use-case: disable the touchpad when the keyboard just above the
touchpad stops being idle.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: James Jones <jajones@nvidia.com>
If the typedef wasn't perfect, indent would get confused and change:
foo = (SomePointlessTypedef *) &stuff[1];
to:
foo = (SomePointlessTypedef *) & stuff[1];
Fix this up with a really naïve sed script, plus some hand-editing to
change some false positives in XKB back.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
These structs will be used to store touch-related data, events and
information.
Drivers must call InitTouchClassDeviceStruct to set up a multi-touch capable
device.
Touchpoints for the DDX and the DIX are handled separately - touchpoints
submitted by the driver/DDX will be stored in the DDXTouchPointInfoRec. Once
the touchpoints are processed by the DIX, new TouchPointInfoRecs are created
and stored. This process is already used for pointer events with the
last.valuators field.
Note that this patch does not actually add the generation of touch events,
only the required structs.
TouchListeners are (future) recipients of touch or emulated pointer events.
Each listener is in a state, depending which event they have already
received. The type of listener defines how the listener got to be one.
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Allocate the memory at device creation time and always store the event, even
if we're not frozen. This way we know which event triggered the grab.
Since the event was never freed anyway except on device shutdown, this
doesn't really change things much.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
When closing down all devices, we manually unset master for all attached
devices, but the device's sprite info still points to the master's sprite
info. This leaves us a window where the master is freed already but the
device isn't yet. A signal during that window causes dereference of the
already freed spriteInfo in mieqEnqueue's EnqueueScreen macro.
Simply block signals when removing all devices. It's not like we're really
worrying about high-responsive input at this stage.
https://bugzilla.redhat.com/show_bug.cgi?id=737031
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Instead of device and master (and just using master), drop the master
argument and let the callers pass in the device the event is to be sent for.
No effective functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
miPointerSetPosition traditionally took coordinates on a per-screen basis,
triggering a screen switch when these went out-of-bounds. For absolute
devices, this prevented screen crossing in the negative x/y direction.
This patch changes the event generation patch to handle screen coordinates
in a desktop range (i.e. all screens together). Screen switches are
triggered when these coordinates are not on the current screen.
This unifies the pointer behaviour of single ScreenRec multihead and
multiple ScreenRecs multihead in that the cursor by default moves about the
whole screen rather than be confined to one single screen. The
transformation matrix may then be used to actually confine the cursor to the
screen again.
Note: fill_pointer_events has to deal with several different coordinate
systems. Make sure you read the comment before trying to understand the code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For scroll wheel support, we used to send buttons 4/5 and 6/7 for
horizontal/vertical positive/negative scroll events. For touchpads, we
really want more fine-grained scroll values. GetPointerEvents now
accepts both old-school scroll button presses, and new-style scroll axis
events, while emitting both types of events to support both old and new
clients.
This works with the new XIScrollClass to mark axes as scrolling axes.
Drivers mark any valuators that send scroll events with SetScrollValuator.
(Currently missing: the XIDeviceChangeEvent being sent when a driver changes
a scroll axis at run-time. This can be added later.)
Note: the SCROLL_TYPE enums are intentionally different values to the XI2
proto values to avoid copy/overlapping range bugs.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
devices.c: In function 'AttachDevice':
devices.c:2409:18: warning: variable 'oldmaster' set but not used
[-Wunused-but-set-variable]
events.c: In function 'ConfineToShape':
events.c:683:15: warning: variable 'pSprite' set but not used
[-Wunused-but-set-variable]
events.c: In function 'ProcGrabPointer':
events.c:4759:15: warning: variable 'time' set but not used
[-Wunused-but-set-variable]
getevents.c: In function 'GetMotionHistory':
getevents.c:425:9: warning: variable 'dflt' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
GetMaster() currently requires an attached slave device as parameter,
resuling in many calls being IsFloating(dev) ? dev : GetMaster(...);
Add two new parameters so GetMaster can be called unconditionally to get the
right device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>