ABS_MT_DISTANCE exists since kernel v2.6.38,
ABS_MT_TOOL_X|Y appeared in v3.6.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Otherwise:
* We can't end the touches while device is disabled
* New touches after enabling the device may erroneously be mapped to old
logical touches
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InitOutput.c: In function ‘OsVendorInit’:
InitOutput.c:630:29: warning: assignment left-hand side might be a candidate for a format attribute [-Wmissing-format-attribute]
winprocarg.c: In function ‘ddxProcessArgument’:
winprocarg.c:231:29: warning: assignment left-hand side might be a candidate for a format attribute [-Wmissing-format-attribute]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This hack was added to suppress events generated by Composite's internal
unmap/map cycle on redirection state change. Since that cycle was
removed in 193ecc8b4, these can go.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pick smaller types where possible, including bitfielding some Bools and
small enums, then shuffle the result to be hole-free. 192 -> 128 bytes
on LP64, 144 -> 96 bytes on ILP32.
Signed-off-by: Adam Jackson <ajax@redhat.com>
this is a simple clean-up that is useful to stop further propogation
of this construct.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some compilers have difficulty with the previous implementation which
relies on undefined behavior according to the C standard. Using
offsetof() from <stddef.h> (which most likely just uses
__builtin_offsetof on modern compilers) allows us to accomplish this
without ambiguity.
This fix also requires support for typeof(). If your compiler does not
support typeof(), then the old implementation will be used. If you see
failures in test/list, please try a more modern compiler.
v2: Added fallback if typeof() is not present.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We've had reports of two copies of the GLX bits, one in the server
and one in libglx.so causing problems, I didn't understand why the
X server needed a copy so drop it, however then we have to fix a missing
GlxExtensionInit that comes from sdksyms, so work around it by moving
that one declaration into a header that sdksyms doesn't scan.
Thanks to Jon Turney for debugging the actual problem.
(copyright header from extinit.h that seems most appropriate put on top).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52402
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
"new" is a reserved word in C++.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Popen and Pclose are never used on Windows, so don't bother to even
try to define them.
System(s) was defined as system(s), but the two users of that
function are in xkb, which carefully redefines that as
Win32System. Move Win32System and Win32TempDir to os/utils.c, renaming
Win32System to be just System, which simplifies the xkb code
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
These flags were unexported by commit a1d41e311c,
which moved the declarations around and lost the _X_EXPORT attributes in the
process. Since drivers need these and it's late in the release cycle, just
re-export them for now.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Not to be confused with XFree86Loader or XorgLoader. Which are both now
dead too.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
setupFunc was used as an early callback for half-modular extensions such
as Xv, XvMC and DGA to set up hooks between the core server and the
modular component. Now we've rid ourselves of that, we can also bin
setupFunc.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
There was nothing XFree86-specific or loader-specific about this, aside
from using xf86MsgVerb instead of ErrorF.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In preparation for gutting loadext.c, move the ExtensionModule struct to
the DIX, and unexport ExtensionModuleList (why, why, why, why was this
ever exported in the first place, tbqh).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of letting it languish in extmod just because we want to
configure bits of it from xf86, move XSELinux to the builtin part of
Xext, and do its configuration from xf86ExtensionInit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xv used to call XvScreenInit and co. through function pointers, as
XvScreenInit may have been sitting on the other side of a module
boundary from xf86XvScreenInit. Why this was so is a mystery, but make
it not so any more.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build these extensions into the core server, rather than letting
them languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build XRes support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build DPMS support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we've built MIT-SCREEN-SAVER support, then just build it into the
main binary, rather than leaving it in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than languishing in its own special module, move RECORD into the
core server.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If DBE support is compiled in the server, just man up and build it into
the server, rather than having it as an external module.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
externsion.h required bits from Xfuncproto.h and dixstruct.h, but
included neither; fix that.
It also had _XFUNCPROTOBEGIN and _XFUNCPROTOEND wrappers, which is a bit
pointless for a server-only library, as it's only needed for C++.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Does what it says on the box, replacing those from Xi/ and glx/.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds new function padding_for_int32() and uses existing pad_to_int32()
depending on required results.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Each DDX currently calls OsReleaseSIGIO in case it was suspended when
the server regen started. This causes a BUG to occur if SIGIO was
*not* blocked at that time. Instead of relying on each DDX, make the
OS layer reliably reset all signal state at server init time, ensuring
that signals are suitably unblocked and that the various signal state
counting variables are set back to zero.
Signed-off-by: Keith Packard <keithp@keithp.com>
For DRI2 in some offload cases we need to set a new pixmap on the crtc,
this hook allows dri2 to call into randr to do the necessary work to set
a pixmap as the scanout pixmap for the crtc the drawable is currently on.
This is really only to be used for unredirected full screen apps in composited
environments.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
add the linked list and provider hooks.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds two functions for drivers to use directly to keep a
linked list of slave pixmaps to do damage tracking on and keep
updated. It also adds a helper function that drivers may optionally
call to do a simple copy area damage update.
v2: use damage.h not damagestr.h, fixes ephyr build.
v3: address ajax review: use slave_dst, drop unused dst member.
v4: check DamageCreate return, add SourceValidate comment,
add a comment addressing possible optimisation possibility
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When randr notices a crtc configuration request for a slave device,
it checks if the slave allocated pixmap exists and is suitable,
if not it allocates a new shared pixmap from the master, shares
it to the slave, and starts the master tracking damage to it,
to keep it updated from the current front pixmap.
If the resize means the crtc is no longer used it will destroy
the slave pixmap.
This adds the concept of a scanout_pixmap to the randr_crtc object,
and also adds a master pixmap pointer to the pixmap object, along
with defining some pixmap helper functions for getting pixmap box/regions.
v2: split out pixmap sharing to a separate function.
v3: update for void *
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a hooks for pixmap sharing and tracking.
The pixmap sharing ones get an integer handle for the pixmap
and use a handle to be the backing for a pixmap.
The tracker interface is to be used when a GPU needs to
track pixmaps to be updated for another GPU.
v2: pass slave to sharing so it can use it to work out driver.
v3: use void * as per keithp's suggestion.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just add the interfaces to attach/detach output slaves, and
a linked list to keep track of them. Hook up the randr providers
list to include these slaves.
v1.1: add another assert to the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This list is meant for attaching unbound gpu screens to initially,
before the client side rebinds them.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds callbacks into the ddx for udev gpu hotplug.
v2: fix some strncmp returns.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch introduces gpu screens into screenInfo. It adds interfaces
for adding and removing gpu screens, along with adding private fixup,
block handler support, and scratch pixmap init.
GPU screens have a myNum that is offset by GPU_SCREEN_OFFSET (256),
this is used for logging etc.
RemoveGPUScreen isn't used until "xfree86: add platform bus hotplug support".
v2: no glyph pictures for GPU screens for now.
v3: introduce MAXGPUSCREENS, fix return value check
v4: fixup myNum when renumbering screens (ajax)
v5: drop cursor privates for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On Linux in order for future hotplug work, we are required to interface
to udev to detect device creation/removal. In order to try and get
some earlier testing on this, this patch adds the ability to use
udev for device enumeration on Linux.
At startup the list of drm/kms devices is probed and this info is
used to load drivers.
A new driver probing method is introduced that passes the udev
device info to the driver for probing.
The probing integrates with the pci probing code and will fallback
to the pci probe and old school probe functions in turn.
The flags parameter to the probe function will be used later
to provide hotplug and gpu screen flags for the driver to behave
in a different way.
This patch changes the driver ABI, all drivers should at least
be set with a NULL udev probe function after this commit.
v2: rename to platform bus, now with 100% less udev specific,
this version passes config_odev_attribs around which are an array
of id/string pairs, then the udev code can attach the set of attribs
it understands, the OS specific code can attach its attrib, and then
the core/drivers can lookup the required attribs.
also add MATCH_PCI_DEVICES macro.
This version is mainly to address concerns raised by ajax.
v3: Address comments from Peter.
fix whitespace that snuck in.
rework to use a linked list with some core functions that
xf86 wraps.
v4: add free list, fix struct whitespace.
ajax this address most of your issues?
v5: drop probe ifdef, fix logic issue
v6: some overhaul after more testing.
Implement primaryBus for platform devices.
document hotplug.h dev attribs - drop sysname attrib
fix build with udev kms disabled
make probing work like the PCI probe code,
match against bus id if one exists, or primary device.
RFC: add new bus id support "PLAT:syspath". we probably
want to match on this a bit different, or use a different
property maybe. I was mainly wanting this for use with
specifying usb devices in xorg.conf directly, but PLAT:path
could also work I suppose.
v6.1: add missing noop platform function
v7: fix two interactions with pci probing and slot claiming, prevents
pci and platform trying to load two drivers for same slot.
v8: test with zaphod mode on -ati driver, fixup resulting issue
clean up common probe code into another function, change busid
matching to allow dropping end of strings.
v9: fix platform probing logic so it actually works.
v9.1: fix pdev init to NULL properly.
v10: address most of Keith's concerns.
v4 was thanks to Reviewed-by: Adam Jackson <ajax@redhat.com>
v5 was Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will permit midispcur to allocate its privates for hotplug outputs
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>