Ensures padding bytes are zero-filled
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Seems silly waiting to check if the client failed to send us enough bytes
until after we've already tried using them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
When passing variable pointers to functions or otherwise doing long
sequences to compute values for replies, create & use some new
temporary variables, to allow for simpler initialization of reply
structures in the following patches.
Move memsets & other initializations to group with the rest of the
filling in of the reply structure, now that they're not needed so
early in the code path.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Add a static mask of prime id and allocate them at screen time,
if the driver supports the prime interfaces and is a gpu screen.
This is instead of them changing due to user controlled randr commands,
as suggested by Keith.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the initial prime support for dri2 offload. The main thing is
when we get a connection from a prime client, we stored the information
and mark all drawables from that client as prime. We then create all
buffers for that drawable on the prime device dri2screen.
Then DRI2UpdatePrime is provided which drivers can call to get a shared
pixmap which they can use as the front buffer. The driver is then
responsible for doing the back->front copy to the shared buffer.
prime requires a compositing manager be run, but it handles the case where
a window get un-redirected by allocating a new pixmap and pointing the crtc
at it while the client is in that state.
Currently prime can't handle pageflipping, so always does straight copy swap,
v1.1: renumber on top of master.
v1.2: fix auth on top of master.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for setting the offload sink to the xf86 ddx.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is so we can tell the scanout pixmap has changed between calls
to the crtc set function.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes a segfault where this code believes we are outside the screen
boundaries on a slave device, but we aren't.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Current USB devices have no hw rendered cursors, so we need the
master GPU to render the cursor, so whenever we plug in a
slave device, fallback to sw rendered cursors.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for the randr callback for setting the output source
for a device.
v2: drop root clip change on detach
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will detach any scanout pixmaps attached to slave crtcs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add the simple passthrough interface for drivers to use,
so they can set scanout pixmaps.
v2: detach scanout pixmap properly.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
v2: Split out DGAAvailable into two interfaces, one for calls from protocol
decoding and one for internal usage, after discussion with ajax and keithp.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is the default attachment, unbound gpu screens get
attached to the 0 protocol screen.
detach on hotunplug.
v2: detach after tearing down crtc/outputs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the framework for DDX provider support.
v2: as per keithp's suggestion remove the xf86 provider object
and just store it in the toplevel object.
v3: update for new protocol
v4: drop devPrivate, free name
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the initial provider object and provider property
support to the randr dix code.
v2: destroy provider in screen close
v2.1: fix whitespace
v3: update for latest rev of protocol + renumber after 1.4 tearout.
v4: fix logic issue, thanks Samsagax on irc
v5: keithp's review: fix current_role, fix copyrights, fix master
reporting crtc/outputs.
v6: port to new randr interface, drop all set role bits for now
v7: drop devPrivate in provider, not needed, add BadMatch returns
for NULL SetProviderOffloadSink and SetProviderOutputSource, drop
the old typedef.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This loop needs to count from 7 to 0, not only from 7 to 1.
The current code always skips the modes {1152, 864, 75, 0}, {1280, 1024, 85, 0},
{1400, 1050, 75, 0}, {1600, 1200, 70, 0} and {1920, 1200, 60, 0}.
Signed-off-by: Torsten Kaiser <x11@ariolc.dyndns.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using -O3 gcc notes that m could reach beyound the end of the EstIIIModes array,
if the last bits of the 11s byte where set.
Fix this, by extending the array to cover all possible bits from est.
https://bugs.freedesktop.org/show_bug.cgi?id=45623
Signed-off-by: Torsten Kaiser <x11@ariolc.dyndns.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This option is to stop the X server adding non-primary devices as
gpu screens.
v2: fix per Keith's suggestion.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This provides add/remove support for platform devices at xfree86 ddx level.
v2: cleanup properly if no driver found.
v3: load the modesetting driver before checking driver list.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the structures and interfaces required for adding/deleteing
gpu screens at the DDX level. The platform probe can pass a new flag
to the driver, so they can call xf86AllocateScreen and pass back the new
gpu screen flag.
It also calls the gpu screens preinit and screeninit routines at
startup.
v2: fix delete screen use after free.
v3: split out pScrn into separate patch
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is in preparation for gpu screens in here, just use
a pScrn pointer to point at the new screen.
suggested by Keith.
v1.1: fix spacing as suggested by Aaron.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On Linux in order for future hotplug work, we are required to interface
to udev to detect device creation/removal. In order to try and get
some earlier testing on this, this patch adds the ability to use
udev for device enumeration on Linux.
At startup the list of drm/kms devices is probed and this info is
used to load drivers.
A new driver probing method is introduced that passes the udev
device info to the driver for probing.
The probing integrates with the pci probing code and will fallback
to the pci probe and old school probe functions in turn.
The flags parameter to the probe function will be used later
to provide hotplug and gpu screen flags for the driver to behave
in a different way.
This patch changes the driver ABI, all drivers should at least
be set with a NULL udev probe function after this commit.
v2: rename to platform bus, now with 100% less udev specific,
this version passes config_odev_attribs around which are an array
of id/string pairs, then the udev code can attach the set of attribs
it understands, the OS specific code can attach its attrib, and then
the core/drivers can lookup the required attribs.
also add MATCH_PCI_DEVICES macro.
This version is mainly to address concerns raised by ajax.
v3: Address comments from Peter.
fix whitespace that snuck in.
rework to use a linked list with some core functions that
xf86 wraps.
v4: add free list, fix struct whitespace.
ajax this address most of your issues?
v5: drop probe ifdef, fix logic issue
v6: some overhaul after more testing.
Implement primaryBus for platform devices.
document hotplug.h dev attribs - drop sysname attrib
fix build with udev kms disabled
make probing work like the PCI probe code,
match against bus id if one exists, or primary device.
RFC: add new bus id support "PLAT:syspath". we probably
want to match on this a bit different, or use a different
property maybe. I was mainly wanting this for use with
specifying usb devices in xorg.conf directly, but PLAT:path
could also work I suppose.
v6.1: add missing noop platform function
v7: fix two interactions with pci probing and slot claiming, prevents
pci and platform trying to load two drivers for same slot.
v8: test with zaphod mode on -ati driver, fixup resulting issue
clean up common probe code into another function, change busid
matching to allow dropping end of strings.
v9: fix platform probing logic so it actually works.
v9.1: fix pdev init to NULL properly.
v10: address most of Keith's concerns.
v4 was thanks to Reviewed-by: Adam Jackson <ajax@redhat.com>
v5 was Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes some really ugly code that got mangled by the indenting.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
LoaderSymbol calls dlsym with RTLD_DEFAULT pseudo handle making it search in
every loaded library. In addition glibc adds NODELETE flag to the library
containing the symbol.
It's used in doLoadModule to locate <modulename>ModuleData symbol, the
module's library gets the flag and is kept in memory even after it is
unloaded.
This patch adds LoaderSymbolFromModule function that looks for symbol only in
library specified by handle. That way the NODELETE flag isn't added.
This glibc behavior doesn't seem to be documented, but even if other
implementations differ, there is no reason to search ModuleData symbol outside
the module's library.
Signed-off-by: Michal Srb <msrb@suse.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
v2: Switch LoaderSymbolFromModule arguments order.
Correct description.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
*dev is the condition of the while loop we're in, reset to NULL after
freeing
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The hooks are left for this cycle, we can drop it next cycle once the
drivers that need it (e.g. wacom) have been updated.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
We can ignore the "wasset" argument now since the DIX will keep proper
refcounting.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This merge includes a minor fixup for '%p' arguments; must cast to
uintptr_t instead of uint64_t as we use -Werror=pointer-to-int-cast
which complains when doing a cast (even explicitly) from a pointer
to an integer of different size.
The input ABI hasn't changed, but input drivers need something to hook on if
they want to log from within signal handlers and the input ABI is the
simplest way of doing so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Already treated as const anyway by all drivers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This corresponds to XListInputDevice(3)'s "type" field (after being
converted to an Atom). Input drivers use the XI_KEYBOARD and similar
defines, even Wacom which falls out of the common defines uses constant
strings here. The use-case for having this non-const is small.
Input ABI break technically, since we never freed this information anyway it
is not a noticable change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The function can be called from a fatal signal handler.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The function may be called from a fatal signal handler.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The function may be called from a fatal signal handler.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The Solaris linker recently added a -z parent flag for easier checking
of symbol definitions in plugins against the program that loads them.
If that's present, this enables it, along with -z defs to error on
undefined symbols to alert us if any modules call symbols that won't
be found at runtime.
This builds upon, and requires, the recent Cygwin work to build Xorg.
It moves a couple more modules to be after the Xorg binary in the build
order so that they can find the binary to check against, much as the
Cygwin changes did (these would be modules built on Solaris but not
Cygwin).
v2: This version only sets the flags for the xorg-server build itself,
and does not yet export them in xorg-server.pc to the drivers, since
most of the drivers are not ready to build with -no-undefined yet.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This code existed in 3 different forms, perhaps it should be
consolidated.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The legacy logic was embarassingly wrong; AuthMagic should return errno,
so returning FALSE only when AuthMagic returns nonzero is exactly wrong.
v2: Match drmAuthMagic by returning -EINVAL rather than EINVAL
Fix trailing whitespace
https://bugs.freedesktop.org/show_bug.cgi?id=51400
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Knut Petersen <knut_petersen@t-online.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
Drivers call xf86InstallSIGIOHandler() for their fd on DEVICE_ON. That
function does not actually enable the signal if it was blocked to begin
with. As a result, if one vt-switches away from the server (SIGIO is
blocked) and then triggers a server regeneration, the signal remains
blocked and input devices are dead.
Avoid this by always unblocking SIGIO when we start the server.
X.Org Bug 50957 <http://bugs.freedesktop.org/show_bug.cgi?id=50957>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Fix glxWinCreateContext() function signature to align with commit 96d74138
"glx: Extend __GLXscreen::createContext to take attributes", which added more
parameters to the screen createContext function for implementing GLX_ARB_create_context
indirect.c: In function 'glxWinScreenProbe':
indirect.c:683:36: warning: assignment from incompatible pointer type
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix the code generator for the dispatch table initialization after
the whitespace/coding style changes to glx/dispatch.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
If the native GL renderer is the GDI generic renderer (as can happen
if we are in safe mode, or the video driver is VGA, or we have hybrid
graphics which hasn't noticed that xwin requires 3d acceleration), don't
use it. It's not accelerated and we will probably get better conformance
and perfomance from swrast.
Fix so we don't install screen function wrappers in glxWinScreenProbe
unless we are succesful.
Also, move fbConfig dumping to after GLX version has been determined
from extensions
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>