RRPointerToNearestCrtc is suppose to snap to the nearest Crtc,
but best_x and best_y is always positive, hence when calling
SetCursorPosition it will make the cursor even further away.
Correct delta x/y to allow negative values and also use
"width/height -1" in the calculation. Also choose the closest
Crtc by setting the "best" value.
Signed-off-by: David Ung <davidu@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Slaving two outputs on a secondary GPU to a primary GPU testing
picked this up, in that we'd try to resize to the totally the
wrong thing, then as usual segfault in the rotation code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
The protocol handlers all have support for swapping variable data and
replies, but the top-level dispatch plumbing was missing.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Both xRRSetProviderOutputSourceReq and xRRSetProviderOffloadSinkReq are
fixed-size requests, so the length on the wire should match exactly.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The previous code was checking the wrong table for function pointers.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The function RRCrtcSet call checks to see if the config being set is
already configured, but, doesn't check that the selected outputs are
connected to the crtc before skipping. This means that the following
sequence will omit the final CrtcSet call to the driver:
CRTC c1 connect to output o
CRTC c2 connect to output o
CRTC c1 connect to output o
This change adds the check to ensure that each of the calls are made to
the driver.
Signed-off-by: David Sodman <dsodman@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Don't use rrScrPriv for nested screen private fetching.
Eliminate a duplicate fetch of the randr screen private in rrCheckPixmapBounding.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Consider all attached output providers when looking for changed outputs and
crtcs.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Send RRResourceChangeNotify event when provider, output or crtc was created or
destroyed. I.e. when the list of resources returned by RRGetScreenResources and
RRGetProviders changes.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Send RRProviderChangeNotify event when a provider becomes output source or
offload sink.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't want to know about changes on the non-protocol screen,
we will fix up setchanged to make sure non-protocol screens update
the protocol screens when they have a change.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When SetChanged is called we now modify the main protocol screen,
not the the gpu screen. Since changed stuff should work at the protocol level.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Introduce a wrapper interface so we can fix things up for multi-gpu
situations later.
This just introduces the API for now.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
So in the cold plug server shutdown case, we reap the resources
before we call CloseScreen handlers, so the config->randr_provider
is a dangling pointer when the xf86CrtcCloseScreen handler is called,
however in the hot screen unplug case, we can't rely on automatically
reaped resources, so we need to clean up the provider in the xf86CrtcCloseScreen
case.
This patch provides a cleanup callback from the randr provider removal
into the DDX so it can cleanup properly, this then gets called by the automatic
code for cold plug, or if hot unplug it gets called explicitly.
Fixes a number of random server crashes on shutdown
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58174
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=891140
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
rrcrtc.c: In function 'RRCrtcDetachScanoutPixmap':
rrcrtc.c:366:9: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
rrcrtc.c: In function 'rrCheckPixmapBounding':
rrcrtc.c:505:13: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
rrcrtc.c:445:9: warning: unused variable 'i' [-Wunused-variable]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
When an RandR shared pixmap is created in rrCreateSharedPixmap, it has a refcnt
of 1. Then, PixmapShareToSlave bumps the refcnt to 2. However, there's no
corresponding PixmapUnshareFromSlave where the refcnt can be decreased again,
and there's no convenient common place where the refcnt can be decremented when
the slave pixmap is destroyed.
Fix this by just unreffing the pixmap twice in RRCrtcDetachScanoutPixmap.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No idea where this got lost across development cycles, but its
definitely missing.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=57448
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
These were added as part of commit 66d92afeae
but never declared or exported. Fixes warnings:
rrproviderproperty.c:255:1: warning: no previous prototype for 'RRPostProviderPendingProperties'
rrproviderproperty.c:327:1: warning: no previous prototype for 'RRConfigureProviderProperty'
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes the xinerama geometry when output slaves are enabled.
Tested with xdpyinfo -ext XINERAMA before after slave added.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reported by parfait 1.0:
Error: Memory leak (CWE 401)
Memory leak of pointer 'newModes' allocated with realloc(((char*)modes), ((num_modes + 1) * 8))
at line 93 of randr/rrmode.c in function 'RRModeCreate'.
pointer allocated at line 82 with realloc(((char*)modes), ((num_modes + 1) * 8)).
Error: Memory leak (CWE 401)
Memory leak of pointer 'newModes' allocated with malloc(8)
at line 93 of randr/rrmode.c in function 'RRModeCreate'.
pointer allocated at line 84 with malloc(8).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reported by parfait 1.0:
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with RRCreateOutputProperty(property)
at line 220 of randr/rrproperty.c in function 'RRChangeOutputProperty'.
'prop' allocated at line 154 with RRCreateOutputProperty(property).
prop leaks when pending != 0 at line 160.
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with RRCreateOutputProperty(property)
at line 346 of randr/rrproperty.c in function 'RRConfigureOutputProperty'.
'prop' allocated at line 334 with RRCreateOutputProperty(property).
at line 350 of randr/rrproperty.c in function 'RRConfigureOutputProperty'.
'prop' allocated at line 334 with RRCreateOutputProperty(property).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reported by parfait 1.0:
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with RRCreateProviderProperty(property)
at line 221 of randr/rrproviderproperty.c in function 'RRChangeProviderProperty'.
'prop' allocated at line 155 with RRCreateProviderProperty(property).
prop leaks when pending != 0 at line 161.
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with RRCreateProviderProperty(property)
at line 345 of randr/rrproviderproperty.c in function 'RRConfigureProviderProperty'.
'prop' allocated at line 333 with RRCreateProviderProperty(property).
at line 349 of randr/rrproviderproperty.c in function 'RRConfigureProviderProperty'.
'prop' allocated at line 333 with RRCreateProviderProperty(property).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
RandR 1.4 was going through review in parallel with main batch of
C99 initialization changes - sync up now that both have landed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
RandR 1.4 was going through review in parallel with main batch of
C99 initialization changes - sync up now that both have landed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds new function padding_for_int32() and uses existing pad_to_int32()
depending on required results.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Ensures padding bytes are zero-filled
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
pAtoms is only allocated if numProps was non-zero, so move the walk
through the property list to copy atoms to it inside the if (numProps)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
When passing variable pointers to functions or otherwise doing long
sequences to compute values for replies, create & use some new
temporary variables, to allow for simpler initialization of reply
structures in the following patches.
Move memsets & other initializations to group with the rest of the
filling in of the reply structure, now that they're not needed so
early in the code path.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
For DRI2 in some offload cases we need to set a new pixmap on the crtc,
this hook allows dri2 to call into randr to do the necessary work to set
a pixmap as the scanout pixmap for the crtc the drawable is currently on.
This is really only to be used for unredirected full screen apps in composited
environments.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the protocol handler and associated providers handling
for the offload slaves, it allows two providers to be connected as
offload sink/source.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
add the linked list and provider hooks.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the output sources to the associated list and adds the protocol
handler for the randr SetProviderOutputSource.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When the client asks for the screen resources list, it will now
get a list of crtc/outputs for the master + all attached slaves,
this will let randr configure all attached slave devices properly.
Keith asked I merge the two functions, but not just yet, the current
multi screen code doesn't handle primary yet properly, will fix it up later.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The master contains the complete screen size bounds, so check
the width/height against it.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tell changed need to tell only for the master pixmap,
however it gets called from various places for slave screens,
so convert to telling clients about changes on the master screen.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Current code constrains the cursor to the crtcs on the master
device, for slave outputs to work we have to include their crtcs
in the constrain calculations.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When randr notices a crtc configuration request for a slave device,
it checks if the slave allocated pixmap exists and is suitable,
if not it allocates a new shared pixmap from the master, shares
it to the slave, and starts the master tracking damage to it,
to keep it updated from the current front pixmap.
If the resize means the crtc is no longer used it will destroy
the slave pixmap.
This adds the concept of a scanout_pixmap to the randr_crtc object,
and also adds a master pixmap pointer to the pixmap object, along
with defining some pixmap helper functions for getting pixmap box/regions.
v2: split out pixmap sharing to a separate function.
v3: update for void *
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just add the interfaces to attach/detach output slaves, and
a linked list to keep track of them. Hook up the randr providers
list to include these slaves.
v1.1: add another assert to the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This provides the unattached provider list to the clients.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>