It's already defined inside REQUIRED_LIBS and all DDX are getting it already.
No semantical changes.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
X server doesn't need to understand fpe internals, so use
register_fpe_functions from libXfont.
It's required to get new version of libXfont, therefore adjust it to be passed
to autoconf.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Any module (drivers) depending on xserver also depends on some of the
server private dependencies. Any driver including xf86.h depends on
xext, kbproto, inputproto and randr.
These dependencies are in separate packages, so anything can happen,
removal, wrong version, etc... and the driver fails during compilation.
Having the private dependencies declared will ensure all packages the
server depends on are present and at the correct version.
Currently each module attempts to check for server dependencies with
various degrees of accuracy. With this patch, the driver will only need
to check for its own explicit dependencies.
Now that xproto is included in Requires.private it is removed from Requires.
All the cflags from both Requires and Requires.private are returned
to caller to pkg-config.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Helps with symbol resolution when building with -z defs
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
It's still being pulled in by the HAL CFLAGS but the requirement to define
this was dropped from DBus pre 1.0 (November 2006).
This means we require dbus 1.0 now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xserver fails to detect libsha1. Problem is that configure checks for
sha1.pc when libsha1 provides libsha1.pc.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously the code was using AC_CHECK_LIB, guaranteeing whether the library
is correct by tracking sha1_begin function. This paranoic checking is not
necessary given there's only one libsha1 in the market, which surely contains
such function.
Moreover, this patch now improves a bit the sha1 implementation checking
behavior using pkg-config to find the right flags that needs to link against.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Some drivers use DRI protocol but implement their own kernel rendering
manager. For these drivers, libdrm becomes useless. --disable-libdrm
configure parameter can be used to disable libdrm support in dri2.
To provide ABI/API compatibility for libdrm based drivers, libdrm call
is wrapped in ifdef.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Uses a fake absolute path to the entity definition files so that
the xmlto --searchpath will work for finding the actual path
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Gaetan Nadon <memsize@videotron.ca>
commit bca85e2e12 introduced it.
Use the version that includes _X_NORETURN
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Other DDXs don't use input hotplugging since config_init was moved to
the DDX in commit d33adcdf03, so there's
no need to link this in.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds DragonFly BSD, OpenSolaris, & GNU Hurd.
Drops MacOS X, since this is in the section specific to the Xorg/XFree86 DDX.
(Matches the OS patterns the configure script checks for.)
Also uses m4 macros to fix the spacing/formatting of the resulting message.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
This lets the DRI2 clients rely on the server to notify them when they
need to get new buffers. Without this, OpenGL clients poll the server
in glViewport() which can be a performance problems and also isn't
completely correct behaviour.
We bump the DRI2 protocol minor to indicate the availability of the
event, which the DRI2 clients can use to avoid polling. This speeds up
various piglit and oglc test cases as well as real applications.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A rewrite of the XWin DDX AIGLX code to actually make it do something useful again
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Features which are disabled by default use the --enable-* syntax to show
how they need to be passed to override the default.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The other SHA1 implementation detections already error out if
specifically requested but were not found.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
When no SHA1 implementation is specified, we should first prefer
system-builtin solutions (libc/libmd/CommonCrypto), then smaller
implementations over the larger ones. libsha1 is much smaller than
libgcrypt, so it should be first.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Acked-by: Julien Cristau <jcristau@debian.org>
Record was broken during the pre-1.6 development cycle and was not fixed
until 1.7.6. Now that it is fixed, re-enable it by default.
This reverts commit 3eaecdd66e.
Conflicts:
configure.ac
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In addition to the conf files found in /etc/X11 or $sysconfdir/X11 used
for local administration, we also reserve a system directory for vendor
and package usage. The simple search path is:
/usr/share/X11/xorg.conf.d
$datadir/X11/xorg.conf.d
Files from these directories will have the lowest config priority. The
directory $datadir/X11/xorg.conf.d is exported from xorg-server.pc in
the variable "sysconfigdir". Packages should install their .conf files
to the directory specified by:
`pkg-config --variable=sysconfigdir xorg-server`
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Older versions generate filenames that are different from
the ones listed in the Makefile.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
WindowsWM support is still experimental, and uses the Rootless extension
which currently breaks the simultaneous build of the other DDXs (see
commit b3415187e9). So we disable it by
default for now; once the latter issue is fixed we can make this 'auto'.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This possibly brings back whatever the bug is in
http://bugs.freedesktop.org/show_bug.cgi?id=1168 for
-rootless mode, but since we don't have reproduction
steps for that, I can't test that...
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Several extensions are not supported by XWin, some of which are enabled
by default in configure. We forcefully disable these early on so that
configure will succeed without arguments and without the corresponding
proto installed.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Only Xorg is installed setuid, so there is no need to run this configure
test on Cygwin.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Due to the checks in configure, this means it gets priority over HAL if
libudev is found.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
udev needs some xorg.conf file to tell it to load a suitable input
driver, 10-evdev.conf is as simple as they come, mapping all evdev
devices to the evdev driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
There are two noreturn functions in the X server: FatalError and
AbortServer. Having any of those two functions in the middle of a call
stack will prevent unwinding the program properly and stops the
backtrace at those functions in gdb.
The file containing FatalError and AbortServer, os/log.c, has to be
compiled with the -mapcs-frame option on ARM to get proper
backtraces. Automake imposes its own restrictions on compiling
individual source files with different options. The recommended way to
do this is to put os/log.c into a convenience library and add this
library inside os/libos.la. See the documentation of GNU Automake
manual, version 1.11.1, section 27.8 Per-Object Flags Emulation, for
details.
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This define was removed in e251c9e75a "Remove all traces of #ifdef XINPUT
and the matching bits from the configure.ac". Drivers that support multiple
server versions and still check for ifdef XINPUT now always build without
XINPUT support if they're calling XORG_DRIVER_CHECK_EXT(XINPUT, inputproto).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
The linker flag required for exporting symbols in executables varies
by platform. libtool handles this with a single -export-dynamic
flag (not to be confused with the similarly-named ELF linker flag)
which tells it to use the correct platform-specific flag at link time.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Allow the default log location to be configurable (e.g. /var/log),
and use separate logs for each display instance (e.g. XWin.0.log).
Make the type of g_pszLogFile const char*, per os/log.c:LogInit().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Although the DDX should be linked to the necessary libraries, we may
also need to pull them in directly to the module to ensure the symbols
are resolved at runtime. Should fix this bug with XSELINUX:
/usr/bin/X: symbol lookup error:
/usr/lib64/xorg/modules/extensions/libextmod.so: undefined symbol:
is_selinux_enabled
-v2: use _LIBADD instead of _LIBS; remove SELINUX_LIBS from
XSERVER_SYS_LIBS as it should only be needed in extmod.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All ddxs require linking against selinux if enabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's have all version-specific requirements in one block.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Keith Packard <keithp@keithp.com>