This picks up support for Xi pointer barriers in the protocol.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
libnettle is smaller than libgcrypt, currently being released more
frequently, and has replaced the latter in gnutls-3.x (which is used
by TigerVNC, so they can avoid pulling in two crypto libraries
simultaneously).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
As for Cygwin, define FD_SETSIZE for uses of select() to be correct.
Link with libpthread.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
All this does is make it so editing configure.ac or Makefile.am doesn't
rebuild the makefiles. Which is just stupid.
v2: Remove --enable-maintainer-mode from autogen.sh
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some compilers have difficulty with the previous implementation which
relies on undefined behavior according to the C standard. Using
offsetof() from <stddef.h> (which most likely just uses
__builtin_offsetof on modern compilers) allows us to accomplish this
without ambiguity.
This fix also requires support for typeof(). If your compiler does not
support typeof(), then the old implementation will be used. If you see
failures in test/list, please try a more modern compiler.
v2: Added fallback if typeof() is not present.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We've had reports of two copies of the GLX bits, one in the server
and one in libglx.so causing problems, I didn't understand why the
X server needed a copy so drop it, however then we have to fix a missing
GlxExtensionInit that comes from sdksyms, so work around it by moving
that one declaration into a header that sdksyms doesn't scan.
Thanks to Jon Turney for debugging the actual problem.
(copyright header from extinit.h that seems most appropriate put on top).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52402
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XAA was the only consumer.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 0c6987df in June 2008 disabled XAA offscreen pixmaps per default,
as they were broken, leaving XAA only able to accelerate operations
directly on the screen pixmap and nowhere else, eliminating acceleration
for basically every modern toolkit, and any composited environment.
So, it hasn't worked for over four years. No-one's even come close to
fixing it.
RIP.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Not to be confused with XFree86Loader or XorgLoader. Which are both now
dead too.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than building the tiny amount of code required for XFree86-DRI as
an external module, build it in if it's enabled at configure time.
v2: Fix test/Makefile.am to only link libdri.la if DRI is set
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
fixup for DRI1 move
Signed-off-by: Keith Packard <keithp@keithp.com>
Now that libXextmodule.la is both empty and unused, we can just build
the one libXext.la for everyone, rather than having Xorg be special and
unique.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
extmod was originally a big pointless module. Now it's an empty,
pointless module. This commit makes it unexist.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than languishing in its own special module, move RECORD into the
core server.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If DBE support is compiled in the server, just man up and build it into
the server, rather than having it as an external module.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
On Linux in order for future hotplug work, we are required to interface
to udev to detect device creation/removal. In order to try and get
some earlier testing on this, this patch adds the ability to use
udev for device enumeration on Linux.
At startup the list of drm/kms devices is probed and this info is
used to load drivers.
A new driver probing method is introduced that passes the udev
device info to the driver for probing.
The probing integrates with the pci probing code and will fallback
to the pci probe and old school probe functions in turn.
The flags parameter to the probe function will be used later
to provide hotplug and gpu screen flags for the driver to behave
in a different way.
This patch changes the driver ABI, all drivers should at least
be set with a NULL udev probe function after this commit.
v2: rename to platform bus, now with 100% less udev specific,
this version passes config_odev_attribs around which are an array
of id/string pairs, then the udev code can attach the set of attribs
it understands, the OS specific code can attach its attrib, and then
the core/drivers can lookup the required attribs.
also add MATCH_PCI_DEVICES macro.
This version is mainly to address concerns raised by ajax.
v3: Address comments from Peter.
fix whitespace that snuck in.
rework to use a linked list with some core functions that
xf86 wraps.
v4: add free list, fix struct whitespace.
ajax this address most of your issues?
v5: drop probe ifdef, fix logic issue
v6: some overhaul after more testing.
Implement primaryBus for platform devices.
document hotplug.h dev attribs - drop sysname attrib
fix build with udev kms disabled
make probing work like the PCI probe code,
match against bus id if one exists, or primary device.
RFC: add new bus id support "PLAT:syspath". we probably
want to match on this a bit different, or use a different
property maybe. I was mainly wanting this for use with
specifying usb devices in xorg.conf directly, but PLAT:path
could also work I suppose.
v6.1: add missing noop platform function
v7: fix two interactions with pci probing and slot claiming, prevents
pci and platform trying to load two drivers for same slot.
v8: test with zaphod mode on -ati driver, fixup resulting issue
clean up common probe code into another function, change busid
matching to allow dropping end of strings.
v9: fix platform probing logic so it actually works.
v9.1: fix pdev init to NULL properly.
v10: address most of Keith's concerns.
v4 was thanks to Reviewed-by: Adam Jackson <ajax@redhat.com>
v5 was Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The Solaris linker recently added a -z parent flag for easier checking
of symbol definitions in plugins against the program that loads them.
If that's present, this enables it, along with -z defs to error on
undefined symbols to alert us if any modules call symbols that won't
be found at runtime.
This builds upon, and requires, the recent Cygwin work to build Xorg.
It moves a couple more modules to be after the Xorg binary in the build
order so that they can find the binary to check against, much as the
Cygwin changes did (these would be modules built on Solaris but not
Cygwin).
v2: This version only sets the flags for the xorg-server build itself,
and does not yet export them in xorg-server.pc to the drivers, since
most of the drivers are not ready to build with -no-undefined yet.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Link XWIN with GLX_SYS_LIBS, just like all the other DDXs
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Bump dri2proto dependency to 2.7.
Bump DRI2INFOREC_VERSION to 7.
This new protocol request effectively allows clients to perform feature
detection on the DDX. The request was added in DRI2 protocol 1.4.
If I had DRI2GetParam in June 2011, when I was implementing support in the
Intel DDX and Mesa for new hardware that required a new DRI2 attachment
format, then I could have avoided a week of pain caused by the necessity
to write a horrid feature detection hack [1] in Mesa. In the future, when
the work begins to add MSAA support to the Intel DDX, having a clean way
to do feature detection will allow us to avoid revisiting and expanding
that hack.
[1] mesa, commit aea2236a, function intel_verify_dri2_has_hiz
v2: If driver doesn't define ds->GetParam, dont' crash. Fall back to
default behavior, per keithp.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net> (v1)
Reviewed-by: Ian Romanick <idr@freedesktop.org> (v1)
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
v2: Bump glproto version to 1.4.15. This patch uses structure names
that only exist in that glproto version and later. Noticed by
Christopher James Halse Rogers.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Both Cygwin and MinGW can use Windows' native CryptoAPI for SHA1,
saving a dependency on libgcrypt or OpenSSL. The necessary functions
are in ADVAPI32.DLL, which is among the default lib flags and is
already used in hw/xwin for accessing the registry.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
ws2_32 is the correct name for the libary (even on 64 bit Windows :-))
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
If the target platform isn't in a list of platforms we know don't use a
setuid binary, we try to test if we can chown something to root.
This test possibly won't give the right answer if we are cross-compiling,
which is common for the MinGW target. This patch adds MinGW to the list
of platforms we know don't use a setuid binary.
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
The MITSHM extension uses SYSV IPC, but even if configure's test
for IPC failed, MITSHM was still enabled by default, breaking
MinGW builds by default.
Unfortunately, fixing this exposes the fact that the HAVE_SYSV_IPC
test wasn't being used for anything before and so we hadn't noticed it
was failing on Cygwin.
Change from using SHM_W|SHM_R flags (which aren't required by POSIX) to
S_IRUSR|S_IWUSR flags (which are)
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Same as the default configuration for Cygwin, --disable-xorg and --disable-dmx DDX by default,
and force --disable-xv and other unsupported extensions
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
As a PE platform, all symbols in both EXEs and DLLs must be resolved
at link time. As Xorg modules depend on symbols in the Xorg
executable, we must build Xorg before its modules, creating an implib
from the former which is used to link the latter. This implib must
then be installed in order to build the drivers.
Currently only two drivers are supported on Cygwin: xf86-video-dummy
(to replace Xvfb/Xfake) and xf86-video-nested (to replace Xnest/Xephyr).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This will be necessary to port Xorg to Cygwin, but other platforms may
find this useful as well.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
grab_window and touchid were removed from the struct for ABI compatibility
reasons, we need to pull in the new, XI 2.2-specific struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is provided by dixmods/libshadow.so and is not part of the main binary.
This addresses a build failure on darwin due to MIEXT_SHADOW_LIB having
unsatisfied dependencies (FB_LIB) in XORG_LIBS.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Uses kvm_getargv() from libkvm.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows us to run the server as a normal user whilst still
being able to use the -modulepath, -logfile and -config switches
We define a xf86PrivsElevated which will do the checks and cache
the result in case it is called more than once.
Also renamed the paths #defines to match their new meaning.
Original discussion which led to this patch can be found here:
http://lists.freedesktop.org/archives/xorg-devel/2011-September/025853.html
Signed-off-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Michal Suchanek <hramrach at centrum.cz>
Reviewed-by: Jamey Sharp <jamey at minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
We do the same thing for libraries and optional modules already, and it's
much easier to read when one of them changes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
We do the same thing for libraries and optional modules already, and it's
much easier to read when one of them changes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The toolchain requirements are documented here:
http://www.x.org/wiki/ModularDevelopersGuide#Required_Tools
Note that autoconf features only found in versions later
than 2.60 must not be used.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Already included during Automake initialization.
After the patch, no change:
configure:3893: checking whether make sets $(MAKE)
configure:3915: result: yes
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace multiple methods of checking for functions with AC_CHECK_FUNCS
Replace multiple methods of selecting fallback funcs with AC_REPLACE_FUNCS
Replace HAS_* and NEED_* #defines with autogenerated HAVE_*
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The code that used getisax to check for MMX support was moved to pixman
and removed from the X server by commit eb2d7fe02f.
The code that used HAVE_MKSTEMP was deleted by the Xprint removal in
commit 1c8bd318fb.
All alloca calls were removed by the patch series end in commit 5e363500c8,
and used custom X checks instead of the autoconf HAVE_ALLOCA anyway.
I can find no record of HAVE_GETUID, HAVE_GETEUID, HAVE_LINK, HAVE_MEMMOVE,
HAVE_MEMSET, HAVE_STRCHR, HAVE_STRRCHR, HAVE_GETOPT, HAVE_GETOPT_LONG,
HAVE_DOPRNT, or HAVE_VPRINTF ever being used, and the calls to those
functions are not wrapped in #ifdefs.
(Most of those are in our baseline requirements of C89 & Unix98 anyway.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The compiler option -fvisibility=hidden is erroneously missing
due to a faulty configuration test. The gcc command is unable to
locate X11/Xfuncproto.h unless the build occurs on a
system where X11 development headers are installed.
configure:21294: checking for symbol visibility support
configure:21323: gcc -std=gnu99 -c -g -O2 -fvisibility=hidden conftest.c >&5
conftest.c:144:28: fatal error: X11/Xfuncproto.h: No such file or directory
The solution is to add an include directive to obtain the location
of X11/Xfuncproto.h which may or may not be the system installed headers.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Linux test code fixed by: Keith Packard <keithp@keithp.com>
If configure is generated with xorg-macros 1.16 or later, this allows
builders to --enable-unit-test and run the tests other than the xi2
tests which require ld -wrap (and are still wrapped in if HAVE_LD_WRAP
in tests/xi2/Makefile). If an older xorg-macros is used, the existing
behaviour is preserved of requiring ld -wrap for all unit tests, but
no side effects occur, so the minimum xorg-macros version is not raised.
If unit testing is enabled without ld -wrap, then we create a bogus
"xi2-tests" script just to report that we're skipping them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This should force the server to have -fno-strict-aliasing even once it
is removed from the warning flags.
See: https://bugs.freedesktop.org/show_bug.cgi?id=31238
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Every module building against xorg-server does not *Require* pixman nor
libpciaccess. If such modules need pixman or pciaccess, they should be
depending on them directly rather than inheriting a dependency from
xorg-server. To do this, they should use PKG_CHECK_MODULES in configure.ac
to check for pixman-1 or pciaccess and include the apporpriate _LIBS variable
to the appropriate _LDFLAGS variable in Makefile.am
This also moves pixman-1 to Requires.private, so CPPFLAGS is set right to
to satisfy include dependencies but avoid linking needlessly.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
This removes the need to pass the following to configure on darwin:
--disable-pciaccess -disable-int10-module --disable-vbe --disable-vgahw --disable-libdrm
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
No semantical changes. Just moved code around, grouping PCI related stuff in a
single chunk.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is slightly draconian, but that API is just awful. In all but
one case in the callers it's used to get a map of some legacy VGA
memory, and it would be cleaner for the caller to just call
pci_device_map_legacy.
The sole exception is in the vesa driver, which uses it to avoid having
to look up which device the BAR belongs to. That's similarly trivial to
fix.
Having done that, Linux's PCI layer is now very small indeed.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
pciaccess handles this now.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
udev_enumerate_add_match_tag() and udev_monitor_filter_add_match_tag()
are mostly optimizations, hence simply skip these calls if they are not
available in the installed version of libudev.
This should fix the build on older versions of udev.
[airlied: fixes tinderbox failures on RHEL6]
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Current autoconf versions are very unhappy when code fragments are not
wrapped in AC_LANG_SOURCE macros, generating errors like:
configure.ac:723: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:606: AS_IF is expanded from...
../../lib/autoconf/general.m4:2032: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2053: AC_CACHE_CHECK is expanded from...
configure.ac:723: the top level
Signed-off-by: Keith Packard <keithp@keithp.com>
This does not really handle hotplug (it's handled inside the kernel,
by the 'mux' devices), but uses the wscons console driver
configuration to figure out the keyboard layout and the list of
pointing devices found by the kernel.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
"configure --with-int10" is not a valid configuration, and the check for
sys/vm86.h and sys/io.h is not used. Delete it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This is the last mention after ccfaf82367
quit using the variable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tiago Vignatti posted an identical patch in June 2010, which I only
noticed after getting the above reviews. His patch was:
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Pasting from ./configure --help's output, one would get:
| configure: WARNING: unrecognized options: --disable-shm
Fix the help string to include the previously missing “mit” bits.
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
If config/udev was enabled, this would default to base, which means that
after regen the devices would get the wrong rules, and hilarity would
ensue.
It's probably safe to default to evdev unconditionally on Linux by now.
Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Unable to find any use of the PERL Automake variable.
It was used in hw/xfree86/scanpci around 2005.
Should it ever be needed, use XORG_WITH_PERL macro.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use the new event types so we can pass a valid SBC value to clients.
Fix up the completion calls to use CARD32 instead of CARD64 to match
the new field size.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
automake generates _DEPENDENCIES from _LIBADD, but it strips out variables.
This resulted in not relinking if some components were rebuilt (like
libdix, libos, etc).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
sdksyms moved from hw/xfree86/loader to hw/xfree86, so the
configure-time create of sdksyms.dep needs to reflect that
change. Otherwise, make might be confused by a missing file and (more
importantly to me) hw/xfree86/loader/sdksyms.dep will be left around
after 'make clean' causing 'make distcheck' to fail.
Passed through from configure.ac via manpages.am
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This matches a change in xorg-sgml-docs whereby the masterdb will look for
the target dbs into the same location as the generated documents.
The target dbs are now installed alongside the generated documents.
Previously they are installed in $prefix/sgml/X11/dbs alongside masterdb which
has the potential of installing outside the package prefix and cause
distcheck to fail when user does not have write permission in this package.
Requires XORG_CHECK_SGML_DOCTOOLS(1.8) which was released 2011-06-11
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bumping this dependency means some additional macros can be used, like
_X_UNUSED.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Implements pointer barriers as specified by version 5 of the XFIXES
protocol. Barriers are axis-aligned, zero-width lines that block pointer
movement for relative input devices. Barriers may block motion in either
the positive or negative direction, or both.
v3:
- Fix off-by-one in version_requests array
- Port to non-glib test harness
- Fix review notes from Søren Sandmann Pedersen, add tests to match
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Relocate the docs under the doc subdir.
Remove redundant xml subdir.
The xmlrules set of makefiles are no longer used.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the appropriate location for reusable configuration and/or
makefile artifacts as opposed to picking one of the subdirs where
it is used.
It shields them from future doc reorg as every subdir
will refer to the root package which never changes location.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makefile is used to build the 60+ docbooks in xorg.
Dtrace is a user document and should be located under doc subdir.
This user document can now refer to external user/specs docs
or can be referred to by such documnets.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Maintaining either requires full knowledge of both.
It's not obvious one has to check the usage of global variables
in devbook.am when maintaining doxygen target. Or vice-versa.
Being in their respective directory, one less thing to worry about.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The user/specs docs now have external references support.
Developers doc are not installed so they do not participate.
However, using a similar makefile shared amongst developers
document reduces maintenance and is forward looking.
Man pages being out of here, reorg developers docs under the same roof.
Drop the obsolete sgml subdir.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Look for Khronos OpenGL spec files using pkg-config, rather than downloading them
Also add a --with-khronos-spec-dir=PATH configure option so XWin can be directed
where to find these files without using the khronos-spec-files package
XWin with AIGLX requires OpenGL spec files in order to generate wrapper code which:
(1) thunks from the glapi dispatch table which uses the default cdecl calling convention
to native GL functions using the stdcall calling convention.
(2) performs function address lookup for OpenGL 1.2+ functions, which are treated
as extensions and so not directly linkable.
v2: KHRONOS_SPEC_DIR is only valid when XWIN_GLX_WINDOWS is defined. Avoid 'make dist'
seeing invalid dependencies by only including rules using KHRONOS_SPEC_DIR if
XWIN_GLX_WINDOWS is defined
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Let configure --enable/disable-aiglx control building of AIGLX for all DDXs. Currently
we can't use --enable/disable-aiglx to control if Xwin DDX is built with AIGLX enabled,
as at the moment it's forced off if we aren't building the X.Org DDX DRI or DRI2 loader
Rearrange things a bit, introducing a new automake conditional, AIGLX_DRI_LOADER to
specifically indicate if the X.Org DDX DRI/DRI2 loader convenience library should be
built, and replace the previous X.Org DDX-specific uses of the AIGLX conditional with that
As before, AIGLX_DRI_LOADER is only enabled if --enable-glx, --enable-aiglx and at least one
of --enable-dri or --enable-dri2 are enabled
This allows the general conditional AIGLX to control if AIGLX is built for the XWin DDX as
well
The C #define AIGLX set by AC_DEFINE(AIGLX) seems to be obsolete, I can't find anything
which checks it
Updated for ajax's "glx: Make --disable-dri not disable AIGLX" patch, which allows DRI2
to be enabled independently of DRI1
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
For fbAdd{Traps,Triangles}() and fbRasterizeTrapezoid() this is just a
matter of adding the image offsets to the trap offsets.
For fbShapes, the story is more complicated:
The recently added pixman API did not allow offsetting
trapezoids. Instead, it would use x_dst and y_dst in such a way that
the effect was to only offset the source image.
In pixman 0.21.8, this API has changed such that all the traps are
conceptually rendered to an infinitely big image, and the source and
destination coordinates are then aligned with (0, 0) of that
image. This means offsetting dst_x and dst_y will now offset the
entire drawing, which is similar to how other composite functions
work.
This patch then changes fbComposite{Triangles,Traps} such that the
source image is aligned with the shapes, and the destination
coordinates offset according to drawable->{x, y}.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
The few features from the glib test suite we used can be replaced with
assert and printf. This patch is a simple replacement for these two
g_assert → assert
g_test_message → printf
g_test_init is removed and so is g_test_bug_base. g_test_run replaced with a
simple return 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Introduced in 6a5bf15fa9
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
AX_TLS detects when toolchains support __thread or __declspec(thread),
but existing code assumed __thread.
This also adds a check to configure.ac to error out if TLS is requested
but unsupported.
Found-by: Tinderbox
http://tinderbox.x.org/builds/2011-03-22-0007
Regression-from: 82b1eaa6ca
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Tom Fogal <tfogal@alumni.unh.edu>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
A handful of modules have begun adding unit test programs.
These macros will help providing a consistent interface which will
help package builders and developers to manage the functionality.
XORG_ENABLE_UNIT_TESTS will turn on/off unit testing, regardless
of how it is implemented. The default (yes/no) can be specified by each
module. It can be used by itself if glib or -wrap support is not needed.
XORG_WITH_GLIB will probe the system for glib-2.0. A different version
can be specified in each module. It will consult XORG_ENABLE_UNIT_TESTS
but can be used by itself in contexts other then unit testing.
The default (yes/no) can be specified by each module.
XORG_LD_WRAP will probe the linker for -wrap support. It will consult
XORG_ENABLE_UNIT_TESTS but can be used by itself in contexts
other then unit testing.
configure options:
--enable-unit-tests Enable building unit test cases (default: auto)
--with-glib Use GLib library for unit testing (default: auto)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
No functional changes.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nobody can have been using this, it's never called from extension init.
XI2 device properties should now be a functional replacement.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Christof Wolf has reported a regression that seems to be caused by
this change, so reverting the change in the 1.9 branch. We'll
investigate a proper fix in master for 1.10.
This reverts commit c89f052104.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The paths in doxygen.conf assumed that srcdir=builddir and broke
otherwise. Use autoconf to fill in the paths to the srcdir so that the
files can be found when users have a separate build directory (as with
distcheck).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Non-GNU makes don't deal with the sinclude or -include variants that
allow Makefile stubs to be created and then included during the build.
Instead, create an empty file at the end of configure so that the
regular include statement can be included. This is how automake handles
automatic source dependencies.
In order to trick automake into not processing the include statement, a
variable is used.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>