In non-rootless mode, not all pixmaps need a wl_buffer backing.
Suggested-by: Twaik Yont (@twaik) in #834
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The compositor may send DRM_FORMAT_MOD_INVALID instead of a list of
modifiers for various reasons. Handle this gracefully by ignoring it.
Without this, if a compositor would send DRM_FORMAT_MOD_INVALID, it'd
result in empty windows provided by Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This FD also triggers the "wait for WM_S0" paths, so that the
compositor may set up a "maintenance line" for Xwayland, for
services that are essential to run before any client (eg. xrdb).
Those services would use this FD, disguised as an extra display
connection.
This -initfd can be seen as a generalization of -wm, a Wayland
compositor may use -initfd to launch its WM and any other clients
that should start up, or it may use -wm as a dedicated connection for
the WM and optionally use -initfd for the misc. startup clients.
If either of -wm or -initfd is passed, Xwayland will expect a selection
notification on WM_S0 before incorporating the FDs in -listen to the
poll list.
Also, correct a minor typo in the listenfd argument output,
give → given.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
If Xwayland gets to realize a window meant for composition before the
compositor redirected windows (i.e. redirect mode is not RedirectDrawManual
yet), the window would stay "invisible" as we wouldn't create a
wl_surface/wl_shell_surface for it at any later point.
This scenario may happen if the wayland compositor sets up a X11 socket
upfront, but waits to raise Xwayland until there are X11 clients. In this
case the first data on the socket is the client's, the compositor can hardly
beat that in order to redirect subwindows before the client realizes a
Window.
In order to jump across this hurdle, allow the late creation of a matching
(shell) surface for the WindowPtr on SetWindowPixmapProc, so it is ensured
to be created after the compositor set up redirection.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This will be dissociated in future commits to handle the cases
where windows are being realized before there is a compositor
handling redirection.
In that case, we still want the DamagePtr to be registered upfront
on RealizeWindowProc before a corresponding xwl_window might be
created. Most notably, it cannot be lazily created on
SetWindowPixmapProc as damage accounting gets broken.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
This adds support for xdg-output-unstable-v1 version 3, added in [1].
This new version deprecates zxdg_output_v1.done and replaces it with
wl_output.done. If the version is high enough, there's no need to wait for both
an xdg_output.done event and a wl_output.done event -- we only care about
wl_output.done.
[1]: 962dd53537
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Some modules are required in multiple places in the meson file.
Move the actual requirements to the top of the file as a variable so
that updating a version does not require changing the actual value in
multiple places.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Building Xwayland without glamor support would raise a warning at build
time:
xwayland.c: In function ‘xwl_screen_init’:
xwayland.c:980:10: warning: unused variable ‘use_eglstreams’
980 | Bool use_eglstreams = FALSE;
| ^~~~~~~~~~~~~~
When building without glamor support, we cannot have EGL Streams support
either, the two being related. So we do not need to declare the variable
`use_eglstreams` if glamor is not enabled.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When building Xwayland without glamor support enabled using automake,
the build would fail at link time trying to find `glamor_block_handler`:
/usr/bin/ld: xwayland-glx.o: in function `egl_drawable_wait_x':
hw/xwayland/xwayland-glx.c:102: undefined reference to
`glamor_block_handler'
Make sure we don't try to build `xwayland-glx.c` without glamor in the
Xwayland Makefile.
Note: Meson build is fine because it's already build only with glamor
enabled.
Fixes: commit 8469241 - "xwayland: Add EGL-backed GLX provider"
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Both `gbm_bo_create()` and `gbm_bo_create_with_modifiers()` can fail and
return `NULL`.
If that occurs, `xwl_glamor_gbm_create_pixmap()` will not create a
pixmap for the (NULL) GBM bo, but would still try to free the bo which
leads to a crash in mesa:
[...]
#7 <signal handler called>
#8 in gbm_bo_destroy (bo=0x0) at ../src/gbm/main/gbm.c:439
#9 in xwl_glamor_gbm_create_pixmap () at xwayland-glamor-gbm.c:245
#10 in ProcCreatePixmap () at dispatch.c:1440
#11 in Dispatch () at dispatch.c:478
#12 in dix_main () at main.c:276
To avoid the crash, only free the GBM bo if not `NULL`.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1729925
There's not really a good way to query this from the wayland server, so
just set the maximum to the X11 protocol limits. While we're at it,
lower the minimum screen size to something implausibly small too, just
in case.
Fixes: xorg/xserver#850
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Running Xwayland non-rootless and resizing the output would lead to a
crash while trying to update the larger areas of the root window.
Make sure we resize the backing pixmap according to the new output size
to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/834
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Using the existing command line option "-listen" for passing file
descriptors between the Wayland compositor and Xwayland is misleading,
Xwayland should add is own command line option for that specific use.
As XWayland is spawned by the Wayland compositor, we cannot just change
the option, as that would break all existing Wayland compositors using
Xwayland, so we add a new options "-listenfd" and mark the previous one
as deprecated and log a warning, but it still works for backward
compatibility.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/214
Xwayland uses the command line option “-listen” to pass file descriptors
from the Wayland compositor.
That breaks the traditional, documented behavior of the “-listen”
command line option which is to enable a transport type.
Checks if the given option starts with a digit, otherwise treat it as a
regular transport type.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/817
Suggested-by: Rodrigo Exterckötter Tjäder
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
a2rgb10 configs would end up with channel masks corresponding to
argb8888. This would confuse the GLX core code into matching an a2rgb10
config to the root window visual, and that would make things look wrong
and bad.
Fix this by handling more cases. We're still not fully general here, and
this could still be wrong on big-endian. The XXX comment about doing
something less ugly still applies, ideally we would get this information
out of EGL instead of making lucky guesses. Still, better than it was.
Fixes: xorg/xserver#824
Hiding the tablet tool cursor results in it being hidden forever after.
This is due to the stale frame callback that will neither be disposed
or replaced. This can be reproduced in krita (X11) as the pointer
cursor is hidden while over the canvas.
Clearing the frame callback ensures the correct behavior in future
xwl_tablet_tool_set_cursor() calls (i.e. a new cursor surface being
displayed, and a new frame callback created), and is 1:1
with xwl_seat_set_cursor() for pointers.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
With `glamor_set_pixmap_texture()` returning its status, remove the hack
and use the return value.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The current code in `xwl_glamor_gbm_create_pixmap_for_bo()` may fail in
several cases that are not checked for:
- `eglCreateImageKHR()` may have failed to create the image,
- `glEGLImageTargetTexture2DOES()` may fail and set an error,
- `glamor_set_pixmap_texture()` may fail for very large pixmaps
because the corresponding FBO could not be created.
Trying to upload content to a pixmap with no texture will crash Mesa,
glamor and Xwayland, e.g.:
XXX fail to create fbo.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x29)
(EE) 1: libpthread.so.0 (funlockfile+0x50)
(EE) 2: libc.so.6 (__memmove_avx_unaligned_erms+0x215)
(EE) 3: dri/i965_dri.so (_mesa_format_convert+0xab3)
(EE) 4: dri/i965_dri.so (_mesa_texstore+0x205)
(EE) 5: dri/i965_dri.so (store_texsubimage+0x28c)
(EE) 6: dri/i965_dri.so (intel_upload_tex+0x13b)
(EE) 7: dri/i965_dri.so (texture_sub_image+0x134)
(EE) 8: dri/i965_dri.so (texsubimage_err+0x150)
(EE) 9: dri/i965_dri.so (_mesa_TexSubImage2D+0x48)
(EE) 10: Xwayland (glamor_upload_boxes+0x246)
(EE) 11: Xwayland (glamor_copy+0x4d1)
(EE) 12: Xwayland (miCopyRegion+0x96)
(EE) 13: Xwayland (miDoCopy+0x43c)
(EE) 14: Xwayland (glamor_copy_area+0x24)
(EE) 15: Xwayland (damageCopyArea+0xba)
(EE) 16: Xwayland (compCopyWindow+0x31c)
(EE) 17: Xwayland (damageCopyWindow+0xd3)
(EE) 18: Xwayland (miResizeWindow+0x7b7)
(EE) 19: Xwayland (compResizeWindow+0x3a)
(EE) 20: Xwayland (ConfigureWindow+0xa96)
(EE) 21: Xwayland (ProcConfigureWindow+0x7d)
(EE) 22: Xwayland (Dispatch+0x320)
(EE) 23: Xwayland (dix_main+0x366)
(EE) 24: libc.so.6 (__libc_start_main+0xf3)
(EE) 25: Xwayland (_start+0x2e)
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Check for the possible cases of failure above and fallback to the
regular glamor pixmap creation when an error is detected.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/661
Without this we're using driswrast to set up GLX visuals. This is
unfortunate because llvmpipe does not expose multisample configs, so
various apps that expect them will fail. With this we just query the
capabilities of the EGL that's backing glamor, and reflect that to the
GLX clients. This also paves the way for xserver to stop being a DRI
driver loader, which is nice.
Fixes: xorg/xserver#640Fixes: xorg/xserver#643
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98272
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
On pointer enter notification, Xwayland checks for an existing pointer
warp with a `NULL` sprite.
In turn, `xwl_pointer_warp_emulator_maybe_lock()` checks for an existing
grab and the destination window using `XYToWindow()` which does not
check for the actual sprite not being `NULL`.
So, in some cases, when the pointer enters the surface and there is an
existing X11 grab which is not an ownerEvents grab, Xwayland would crash
trying to dereference the `NULL` sprite pointer:
#0 __GI_raise ()
#1 __GI_abort () at abort.c:79
#2 OsAbort () at utils.c:1351
#3 AbortServer () at log.c:879
#4 FatalError () at log.c:1017
#5 OsSigHandler () at osinit.c:156
#6 OsSigHandler () at osinit.c:110
#7 <signal handler called>
#8 XYToWindow (pSprite=0x0, x=0, y=0) at events.c:2880
#9 xwl_pointer_warp_emulator_maybe_lock () at xwayland-input.c:2673
#10 pointer_handle_enter () at xwayland-input.c:434
Avoid the crash by simply checking for the sprite being not `NULL` in
`xwl_pointer_warp_emulator_maybe_lock()`
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.redhat.com/1708119
Commit d8ec33fe05 added libglxvnd.la to
Xwayland_LDFLAGS but GLX can be disabled through --disable-glx.
In this case, build fails on:
make[3]: *** No rule to make target '../../glx/libglxvnd.la', needed by 'Xwayland'. Stop.
make[3]: *** Waiting for unfinished jobs....
Fixes:
- http://autobuild.buildroot.org/results/397f8098c57fc6c88aa12dc8d35ebb1b933d52ef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
xwl_present_cleanup frees the struct xwl_present_window memory,
so if there's a pending callback, we have to destroy it to prevent
use-after-free in xwl_present_sync_callback.
Should fix issue #645.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Xwayland creates and destroys the CRTC along with the Wayland outputs,
so there is possibly a case where the number of CRTC drops to 0.
However, `xwl_present_get_crtc()` always return `crtcs[0]` which is
invalid when `numCrtcs` is 0.
That leads to crash if a client queries the Present capabilities when
there is no CRTC, the backtrace looks like:
#0 raise() from libc.so
#1 abort() from libc.so
#2 OsAbort() at utils.c:1350
#3 AbortServer() at log.c:879
#4 FatalError() at log.c:1017
#5 OsSigHandler() at osinit.c:156
#6 OsSigHandler() at osinit.c:110
#7 <signal handler called>
#8 main_arena() from libc.so
#9 proc_present_query_capabilities() at present_request.c:236
#10 Dispatch() at dispatch.c:478
#11 dix_main() at main.c:276
To avoid returning an invalid pointer (`crtcs[0]`) in that case, simply
check for `numCrtcs` being 0 and return `NULL` in that case.
Thanks to Michel Dänzer <michel.daenzer@amd.com> for pointing this as a
possible cause of the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1609181
Since 08843efc KWin was not able to start a Wayland session. Independently
of listen_fd_count add_client_fd must be called. Same holds for the
wm_selection_callback. Therefore just remove the condition.
Bugzilla: https://bugs.freedesktop.org/109220
Signed-off-by: Roman Gilg <subdiff@gmail.com>
The buffer release queue has two kinds of entries:
* Pending async flips.
* Completed flips waiting for their buffer to be released by the Wayland
compositor.
xwl_present_timer_callback neither completes async flips nor releases
buffers, so the timer isn't needed for the buffer release queue.
Fixes issue #12. Presumably the problem was that Present operations on
unmapped windows were executed immediately instead of only when reaching
the target MSC.
When a window is unrealized, a pending frame callback may never be
called, which could result in repeatedly freezing until the frame timer
fires after a second.
Fixes these symptoms when switching from fullscreen to windowed mode in
sauerbraten.
There's no need to keep track of the window which last performed a
Present flip. This fixes crashes due to the assertion in
xwl_present_flips_stop failing. Fixes issue #10.
The damage generated by a flip only needs to be ignored once, then
xwl_window::present_flipped can be cleared. This may fix freezing in
the (hypothetical) scenario where Present flips are performed on a
window, followed by other drawing requests using the window as the
destination, but nothing triggering xwl_present_flips_stop. The damage
from the latter drawing requests would continue being ignored.
There are logically server state not screen state. Not that multiple
screens works, at the moment, but that's no excuse to be sloppy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Completing them from xwl_present_sync_callback had at least two issues:
* It was before the MSC was incremented in xwl_present_frame_callback,
so the MSC value in the completion event could be lower than the
target specified by the client. This could cause hangs with the Mesa
Vulkan drivers.
* It allowed clients to run at a frame-rate higher than the Wayland
compositor's frame-rate, wasting energy on generating frames which
were never displayed. This isn't expected to happen unless the client
specified PresentOptionAsync (in which case flips are still completed
from xwl_present_sync_callback, allowing higher frame-rates).
v2:
* Make xwl_present_has_events return true when there's a pending
"synchronous" flip, so those complete after at most ~1 second even if
the Wayland server doesn't send a frame event.
Bugzilla: https://bugs.freedesktop.org/106713
Apart from simplifying the code, this should also prevent a condition
(which might only be possible with the following fix) reported in
https://gitlab.freedesktop.org/wayland/weston/issues/115#note_52467:
1. xwl_present_timer_callback indirectly calls xwl_present_reset_timer
-> xwl_present_free_timer
2. xwl_present_timer_callback then returns a non-0 value, so DoTimer
calls TimerSet with the old xwl_present_window->frame_timer pointer
which was freed in step 1 => use after free
Calling xwl_present_reset_timer explicitly passes NULL to TimerSet if
step 1 freed xwl_present_window->frame_timer, and it will allocate a new
one.
The function `xwl_glamor_gbm_create_pixmap()` first creates a buffer
objects and then creates the xwl_pixmap from it.
However, `xwl_glamor_gbm_create_pixmap_for_bo()` is not called if the
buffer object creation fails, and `xwl_glamor_gbm_create_pixmap()`
simply returns `glamor_create_pixmap()`.
The problem with this is that if `xwl_glamor_gbm_create_pixmap_for_bo()`
is not called then neither is `xwl_pixmap_set_private()` and further
calls to `xwl_pixmap_get()` will return NULL and cause a NULL pointer
dereference if the return value is not checked:
#0 xwl_glamor_gbm_get_wl_buffer_for_pixmap ()
at hw/xwayland/xwayland-glamor-gbm.c:248
#1 xwl_window_post_damage () at hw/xwayland/xwayland.c:697
#2 xwl_display_post_damage () at hw/xwayland/xwayland.c:759
#3 block_handler () at hw/xwayland/xwayland.c:890
#4 BlockHandler () at dix/dixutils.c:388
#5 WaitForSomething () at os/WaitFor.c:201
#6 Dispatch () at dix/dispatch.c:421
#7 dix_main () at dix/main.c:276
#8 __libc_start_main () at ../csu/libc-start.c:308
#9 _start ()
(gdb) print xwl_pixmap
$1 = (struct xwl_pixmap *) 0x0
Make sure we check for `xwl_pixmap_get()` returned value where relevant
and fail gracefully if this is the case.
See also: https://gitlab.gnome.org/GNOME/mutter/issues/340
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marco Trevisan <mail@3v1n0.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
`xwl_present_timer_callback()` is initially marked a private and later
implemented as public.
Let's keep that private, shall we.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
0a9415cf apparently can tickle bugs in the GL stack where glGetString
returns NULL, presumably because the eglMakeCurrent() didn't manage to
actually install a dispatch table and you're hitting a stub function.
That's clearly not our bug, but if it happens we should at least not
crash. Notice this case and fail gently.
Signed-off-by: Adam Jackson <ajax@redhat.com>
wl_drm's protocol "device" event provides the path to the DRM device,
which may not be a render node, thus causing Xwayland to fall back to
DRM authentication which may fail if the user has switched to another
VT while Xwayland is starting.
Search for a render node corresponding to the given DRM device and try
to use it instead, as render nodes do not need DRM authentication and
Xwayland can make use of them if it can find one.
Closes: https://bugs.freedesktop.org/108038
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mesa started supporting GL_OES_EGL_image on llvmpipe in 17.3, after this
commit:
commit bbdeddd5fd0b797e1e281f058338b3da4d98029d
Author: Gurchetan Singh <gurchetansingh@chromium.org>
Date: Tue Aug 1 14:49:33 2017 -0700
st/dri: add drisw image extension
That's pretty cool, but it means glamor now thinks it can initialize on
llvmpipe. This is almost certainly not what anyone wants, as glamor on
llvmpipe is pretty much uniformly slower than fb.
This fixes both Xorg and Xwayland to refuse glamor in such a setup.
Xephyr is left alone, both because glamor is not the default there and
because Xephyr+glamor+llvmpipe is one of the easier ways to get xts to
exercise glamor.
The (very small) downside of this change is that you lose DRI3 support.
This wouldn't have helped you very much (since an lp glamor blit is
slower than a pixman blit), but it would eliminate the PutImage overhead
for llvmpipe's glXSwapBuffers. A future change should add DRI3 support
for the fb-only case.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Xwayland's `xwl_destroy_window()` invokes `xwl_present_cleanup()`
before the common `DestroyWindow()`.
But then `DestroyWindow()` calls `present_destroy_window()` which will
possibly end up in `xwl_present_abort_vblank()` which will try to access
data that was previously freed by `xwl_present_cleanup()`:
Invalid read of size 8
at 0x434184: xwl_present_abort_vblank (xwayland-present.c:378)
by 0x53785B: present_wnmd_abort_vblank (present_wnmd.c:651)
by 0x53695A: present_free_window_vblank (present_screen.c:87)
by 0x53695A: present_destroy_window (present_screen.c:152)
by 0x42A90D: xwl_destroy_window (xwayland.c:653)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
Address 0x182abde0 is 80 bytes inside a block of size 112 free'd
at 0x4C2FDAC: free (vg_replace_malloc.c:530)
by 0x42A937: xwl_destroy_window (xwayland.c:647)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
by 0x446DA5: ProcKillClient (dispatch.c:3279)
by 0x4476AF: Dispatch (dispatch.c:479)
Block was alloc'd at
at 0x4C30B06: calloc (vg_replace_malloc.c:711)
by 0x433F46: xwl_present_window_get_priv (xwayland-present.c:54)
by 0x434228: xwl_present_get_crtc (xwayland-present.c:302)
by 0x539728: proc_present_query_capabilities (present_request.c:227)
by 0x4476AF: Dispatch (dispatch.c:479)
by 0x44B5B5: dix_main (main.c:276)
by 0x75F611A: (below main) (libc-start.c:308)
This is because `xwl_present_cleanup()` frees the memory but does not
remove it from the window's privates, and `xwl_present_abort_vblank()`
will still find it and hence try to access that freed memory...
Remove `xwl_present_window` from window's privates on cleanup so that no
other function can find and reuse that data once it's freed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1616269
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_output->randr_crtc is used in the update_screen_size() function :
==5331== Invalid read of size 4
==5331== at 0x15263D: update_screen_size (xwayland-output.c:190)
==5331== by 0x152C48: xwl_output_remove (xwayland-output.c:413)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
==5331== by 0x27574B: Dispatch (dispatch.c:421)
==5331== by 0x279945: dix_main (main.c:276)
==5331== Address 0x1aacb5f4 is 36 bytes inside a block of size 154 free'd
==5331== at 0x48369EB: free (vg_replace_malloc.c:530)
==5331== by 0x1F8AE8: RROutputDestroyResource (rroutput.c:421)
==5331== by 0x29A2AC: doFreeResource (resource.c:880)
==5331== by 0x29AE5B: FreeResource (resource.c:910)
==5331== by 0x152BE0: xwl_output_remove (xwayland-output.c:408)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== Block was alloc'd at
==5331== at 0x48357BF: malloc (vg_replace_malloc.c:299)
==5331== by 0x1F93E0: RROutputCreate (rroutput.c:83)
==5331== by 0x152A75: xwl_output_create (xwayland-output.c:361)
==5331== by 0x14BE59: registry_global (xwayland.c:764)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents multiple scroll events happening for wayland compositors
which send axis values other than 10. For example, libinput will
typically return 15 for each scroll wheel step, and if a wayland
compositor sends those to xwayland without normalising them, 2 scroll
wheel steps will end up as 3 xorg scroll events. By listening for the
discrete_axis event, this will now correctly send only 2 xorg scroll
events.
The wayland protocol gurantees that there will always be an axis event
following an axis_discrete event. However, it does not gurantee that
other events (including other axis_discrete+axis pairs) will not happen
in between them. So we must keep a list of outstanding axis_discrete
events.
Signed-off-by: Scott Anderson <scott@anderso.nz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
