Commit Graph

27 Commits

Author SHA1 Message Date
Peter Hutterer
2285fe78c0 xfree86: add support for MatchIsTabletPad
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
2016-05-03 16:15:51 +10:00
Peter Hutterer
fc4fbe8224 xfree86: add NoMatchFoo directives for InputClass sections
InputClass sections use various MatchFoo directives to decide which device to
apply to. This usually works fine for specific snippets but has drawbacks for
snippets that apply more generally to a multitude of devices.

This patch adds a NoMatchFoo directive to negate a match, thus allowing
snippets that only apply if a given condition is not set. Specifically, this
allows for more flexible fallback driver matching, it is now possible to use a
snippet that says "assign driver foo, but only if driver bar wasn't already
assigned to it". For example:

Section "InputClass"
   Identifier "libinput for tablets"
   MatchIsTablet "true"
   NoMatchDriver "wacom"
   Driver "libinput"
EndSection

The above only assigns libinput to tablet devices if wacom isn't already
assigned to this device, making it possible to select a specific driver by
installing/uninstalling it.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
2015-12-18 11:56:46 +10:00
Dave Airlie
3b6930c5d0 xserver: add xorg.conf support for gpu devices. (v2.1)
This allows gpu devices to be specified in xorg.conf Screen sections.

Section "Device"
        Driver "intel"
        Identifier "intel0"
        Option "AccelMethod" "uxa"
EndSection

Section "Device"
        Driver "modesetting"
        Identifier "usb0"
EndSection

Section "Screen"
        Identifier "screen"
        Device "intel0"
        GPUDevice "usb0"
EndSection

This should allow for easier tweaking of driver options which
currently mess up the GPU device discovery process.

v2: add error handling for more than 4 devices, (Emil)
fixup CONF_ defines to consistency
add MAX_GPUDEVICES define
(yes there is two defines, this is consistent
with everywhere else).
remove braces around slp (Mark Kettenis)
man page fixups (Aaron)
v2.1: fixup whitespace (Aaron)

Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-04-27 13:40:40 +10:00
Peter Hutterer
732fd7e571 Drop trailing whitespaces
sed -i "s/[ ]\+$//g" **/*.(c|h)

happy reviewing...
git diff -w is an empty diff.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-11-12 10:25:00 +10:00
Adam Jackson
35f0257360 xfree86: Remove Option "TextClockFreq"
No modern driver pays attention to this.  Presumably there existed
hardware once where you couldn't just read the right values out of the
CRTC.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
2014-09-26 15:27:18 -04:00
Oleg Samarin
7070ebeeba xfree86: add new key MatchSeat to xorg.conf sections "Device", "Screen", and "ServerLayout"
This patch introduces a new key MatchSeat in xorg.conf (also applies to
any .conf file in xorg.conf.d). It will allow targeting a given
"Device", "Screen", and/or "ServerLayout" section to a particular
seat only (specified by option "-seat" in X server command line),
so that other seats won't be affected.

Without this patch, one needs to write a separate xorg.conf.custom
file and pass it to X server via "-config" option, if one wants that
these settings only apply for the right seat. However, in some cases,
this solution is undesirable or even impossible (e.g. when using GDM,
which doesn't allow X server command line customization).

Example file (/etc/X11/xorg.conf.d/seat1.conf), which would be ignored
by X server unless it was started with "-seat seat1" option:

Section "Device"
    Identifier "card0"
    Driver "nvidia"
    Option "NoLogo" "True"
    MatchSeat "seat1"
EndSection

Signed-off-by: Oleg Samarin <osamarin68@gmail.com>
Signed-off-by: LaƩrcio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-05-01 08:19:19 +10:00
Keith Packard
9838b7032e Introduce a consistent coding style
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:

	-bap
	-psl
	-T PrivatePtr
	-T pmWait
	-T _XFUNCPROTOBEGIN
	-T _XFUNCPROTOEND
	-T _X_EXPORT

The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.

The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.

The comparison was done with this script:

dir1=$1
dir2=$2

for dir in $dir1 $dir2; do
	(cd $dir && find . -name '*.o' | while read file; do
		dir=`dirname $file`
		base=`basename $file .o`
		dump=$dir/$base.dump
		objdump -d $file > $dump
	done)
done

find $dir1 -name '*.dump' | while read dump; do
	otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
	diff -u $dump $otherdump
done

Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
2012-03-21 13:54:42 -07:00
Alexandr Shadchin
ac5881d6d0 Remove unused vtSysreq
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Tested-by: Matthieu Herrb <matthieu.herrb@laas.fr>
2011-09-29 23:05:35 +06:00
Oleh Nykyforchyn
c05c8640f1 xfree86: Allow "MatchLayout" statements in config files
Usage example (tested on a dual-seat PC):
Section "InputClass"
 	Identifier "keyboard-all"
 	MatchIsKeyboard "on"
 	MatchDevicePath "/dev/input/event*"
 	MatchLayout "!GeForce|!Matrox"
 	Driver "evdev"
 	Option "XkbLayout" "us"
 	Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

It disables auto keyboard configuration for layouts "GeForce" and "Matrox".
Note that "" in patterns means "no Layout sections found", e.g.
 	MatchLayout "GeForce|"
is "in layout GeForce or without explicit layout at all".

Signed-off-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-05-25 08:23:58 +10:00
Jesse Adkins
23e329b564 xfree86: parser: Remove 'CUSTOM' flag option in Monitor section.
Not used in the initial import, and also not documented.

Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
2010-11-10 21:35:58 -08:00
Adam Jackson
788bfbf18a dri1: Remove "buffers" from the config logic
This was only ever used from the glint driver, which has since lost its
DRI support.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
2010-10-18 15:34:08 -04:00
Dan Nicholson
66b21b2f45 xfree86: Match devices based on current driver setting
Often we want to apply a driver specific option to a set of devices and
don't care how the driver was selected for that device. The MatchDriver
entry can be used to match the current driver string:

	MatchDriver "evdev|mouse"
	Option "Emulate3Buttons" "yes"

The driver string is a case sensitive match.

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-06-11 09:44:40 +10:00
Dan Nicholson
87a1507da7 xfree86: Match devices based on USB ID
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:

	MatchUSBID "046d:*"

The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-06-11 09:30:33 +10:00
Dan Nicholson
645679c152 xfree86: Match devices based on PnP ID
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:

	MatchPnPID "WACf*"

A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-06-11 09:30:07 +10:00
Dan Nicholson
d1b4beecbc xfree86: Add MatchOS InputClass entry for operating system matching
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.

The operating system name is the same as `uname -s`, and matching is
case-insensitive.

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-06-10 14:36:36 +10:00
Peter Hutterer
c6d9bc092c Add tag matching to input attributes.
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.

Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).

i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".

Example configuration:
udev:
    ENV{ID_INPUT.tags}="foo,bar"

hal:
    <merge key="input.tags" type="string">foo,bar</merge>

xorg.conf:
    Section "InputClass"
            Identifier "foobar quirks"
            MatchTag "foo|foobar"
            Option "Foobar" "on"
    EndSection

Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
2010-02-11 19:25:49 +10:00
Dan Nicholson
42e8c9224e xfree86: Introduce InputClass configuration
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.

The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:

* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
  MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen

See the INPUTCLASS section in xorg.conf(5) for more details.

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2009-12-23 05:54:40 -08:00
Alan Coopersmith
e0a451eb7c Obsolete InputDevices keyword in xorg.conf Files section
Was only used to provide a list of input devices that XF86-Misc could use,
now that XF86-Misc is gone, was parsed and logged, then completely ignored.

(Depends on previous patch that introduces OBSOLETE_TOKEN in parser to
 make obsolete keywords like InputDevices & RgbPath be non-fatal errors.)

Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Adam Jackson <ajax@redhat.com>
2009-02-18 14:50:25 -08:00
Alan Coopersmith
d2cf562bba Make RgbPath keyword in xorg.conf a non-fatal error
Xorg shouldn't refuse to run just because the user has an xorg.conf that
had the previously-used RgbPath keyword in it.

Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
2009-02-18 14:49:23 -08:00
Keith Packard
76f18b94bd Add XkbDir to Files config file section
The XKB base directory was not configuable through the config file.

Signed-off-by: Keith Packard <keithp@keithp.com>
2009-02-17 11:01:15 -08:00
Adam Jackson
0bdd20a045 Eradicate the VTInit code.
"This option should rarely be used."  Never sounds like a better idea.
2008-02-14 07:52:46 +11:00
Daniel Stone
dda10c9066 Remove all traces of external RGB database (and Speedo)
Remove all references to an external RGB database (which hasn't been enabled
for a very long time).  Also get rid of some references to Speedo fonts.
2007-11-05 16:28:35 +00:00
David Nusinow
e91b9ddc7a Improve modules loading defaults
Provide default modules that may be overrided easily. Previously the
server would load a set of default modules, but only if none were
specified in the xorg.conf, or if you didn't have a xorg.conf at all. This
patch provides a default set and you can add only the "Load" instructions
to xorg.conf that you want without losing the defaults. Similarly, if you
don't want to load a module that's loaded by default, you can add "Disable
modulename" to your xorg.conf (see man xorg.conf in this release for
details). This allows for a minimal "Modules" section, where the user only
need specify what they want to be different. See bug #10541 for more.

The list of default modules is taken from the set loaded by default when
there was a xorg.conf containing no "Modules" section.

A potential problem for some users is that some users disable a module,
most notably DRI, by commenting out the "Load" line in their xorg.conf.
This needs to be changed to an uncommented "Disable" line, as DRI is
loaded by default.
2007-05-03 22:00:23 -04:00
Adam Jackson
0aaac95b0d Remove RCS tags. Fix Xprint makefile braindamage. 2006-07-21 17:56:00 -04:00
Daniel Stone
e03198972c Add Xtrans definitions (FONT_t, TRANS_CLIENT) to clean up warnings.
Add XSERV_t, TRANS_SERVER, TRANS_REOPEN to quash warnings.
Add #include <dix-config.h> or <xorg-config.h>, as appropriate, to all
    source files in the xserver/xorg tree, predicated on defines of
    HAVE_{DIX,XORG}_CONFIG_H. Change all Xfont includes to
    <X11/fonts/foo.h>.
2005-07-03 07:02:09 +00:00
Kaleb Keithley
adc7f9a4eb XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks 2003-11-25 19:29:01 +00:00
Kaleb Keithley
9508a382f8 Initial revision 2003-11-14 16:48:57 +00:00