Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Main problem is that EventType enumeration members can be different in
module and in server, which obviously causes problems.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add --without-kdrive-{kbd,mouse,evdev} configure options disabling
Linux keyboard driver, Linux mouse drivers (ps2, bus,ms),
and Linux evdev driver.
Build all drivers by default as before.
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This profile is inspired by the accel code removed from the wacom driver.
It ascends from zero to acceleration, maxing out at threshold. This means you
can control the slope using threshold, which wasn't possible in wacom.
For sanity's sake, threshold should grow with acceleration.
Works best with adaptive deceleration, since otherwise it only generates
acceleration above 1, causing seldom pixel skips.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
InitValuatorClassDeviceStruct always initializes with the default profile.
The default profile allocs data and adds a few properties which become
obsolete if the profile is changed lateron by the driver.
The property handlers are stored in the device's devPrivates and cleaned up.
Ideally, the property handler ID's could be stored somewhere more obvious,
but that seems to require breaking the ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Simon Thum <simon.thum@gmx.de>
Xvesa was gone in commit 6d21fbf0 and this should be there as well.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
libSystem on darwin can handle SHA1 computation without needing to pull in
OpenSSL. See CC_crypto(3)
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
On Sun, Nov 01, 2009 at 02:54:13PM -0800, Keith Packard wrote:
> Excerpts from Matthieu Herrb's message of Sun Nov 01 09:34:35 -0800 2009:
>
> > +AC_CHECK_FUNCS([SHA1Init], [HAVE_LIBC_SHA1=yes])
>
> I'd suggest AC_CHECK_FUNC instead; as far as I can tell, AC_CHECK_FUNCS
> will also define HAVE_SHA1INIT. Also, can you use HAVE_LIBC_SHA1
> consistently rather than having two separate names (HAVE_LIBC_SHA1 and
> HAVE_SHA1_IN_LIBC)? Yes, I know one is a preprocessor symbol and the
> other is a cpp shell variable, but I think that will work anyway.
>
New version taking you comments into account.
From: Matthieu Herrb <matthieu.herrb@laas.fr>
Date: Sun, 1 Nov 2009 18:19:27 +0100
Subject: [PATCH] Add a probe for SHA1 functions in libc in *BSD.
The interface is the same as the one in libmd.
Signed-off-by: Keith Packard <keithp@keithp.com>
There are small systems which don't need OpenSSL or gcrypt.
Add libsha1 (http://github.com/dottedmag/libsha1) as an alternative
small SHA1 implementation.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This function was moved verbatim into libXfont-1.4, and it is not used
by the server or any drivers. Exporting it in both places leads to
multiple definition linking errors on Cygwin, where we need to use a
static libXfont due to poor weak-symbol handling.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
XWin uses ddxBeforeReset, which is called in DIX. Other DDXs need to
define these in order to avoid an undefined symbol error at link time
when building alongside XWin. Xnest and Xvfb already provide empty stubs;
this does the same for Xdmx and the platform-neutral KDrive servers.
Also add a prototype to avoid a warning in all DDXs.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The previous code was copied and in both cases incorrectly fixed
up the colormaps after resizing the visuals, this patch consolidates
the visual resize + colormaps fixups in one place. This version
also consolidates the vid allocation for the DepthPtr inside the
function.
I'm not 100% sure colormap.[ch] is the correct place for this but
visuals are mostly created in fb and I know thats not the place to
be resizing them.
Fixes fd.o bug #19470.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Now that all event queues hold internal events only, they never need
to be resized. Resizing them led to memory corruption as they would
get sized for an appropriate xEvent, not an internal event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For core and XI1 events, store the key_repeat flag in the sequence number
until TryClientEvents. The sequenceNumber is unset until TryClientEvents.
[Also thrown in, some random indentation changes. Thanks]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bits above XI2LASTEVENT are invalid and cause in BadValues. These checks
must be performed anywhere where a mask_len parameter is given.
This patch also adds the missing checks to grab masks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds support for using the libpciaccess interface for
vga arbitration support on top of a kernel which supports it.
Currently patches are queued for kernel 2.6.32 in jbarnes
pci tree, and shipping in Fedora kernel.
Co-authors:
Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch corrects a misnaming of XTest-related functions.
The extension itself announces itself as XTEST. Xtst is the library name
itself, but all library functions are prefixed by XTest. Same with the
naming in the server.
- Rename all *Xtst* functions to *XTest* for consistency with the library
and in-server API.
- Rename the "Xtst device" property to "XTEST device" for consistency with
the extension naming.
- Rename the device naming to "<master device name> XTEST device". The
default xtest devices become "Virtual core XTEST pointer" and "Virtual
core XTEST keyboard".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The smart scheduler is designed to minimize scheduler overhead by
increasing the interval between WaitForSomething calls when a single
client is running. However, the software rotation code depends on
its BlockHandler being invoked for screen updates; the long delays
caused by the smart scheduler optimizations means that screen updates
can be delayed a long time as well.
The change is simple -- prevent the smart scheduler from increasing
the scheduling interval while any screen is using software rotation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The extern declaration in xichangehierarchy.c was broken anyway.
This fixes a crash on creating a new master device.
Reported-by: Maxim Levitsky
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DCEs are now processed when sent throught the master device, not when sent
through the slave device. This includes a removal of some un-used (or partly
used) fields in the DCE itself to something more self-explanatory.
TODO: if a device has events queued and its attachment is changed, the DCE
is silently dropped now. Instead, it should be generated as soon as the
first event after the attachment is sent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And shuffle them around so that the part used by drivers is up the top and
commented.
Also, woo, the sdksyms script doesn't like declarations with return type and
function name on the same line...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If you want to run a pre-1999 kernel, you'll need a pre-2009 X server
[Some pre-Solaris 8 VT support is left by this patch to allow reuse by
the new Solaris VT support that follows in the next patch.]
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Use enum EventType instead of ints. This requires a load of default
cases in various switch statements to silence compiler warnings.
Reported-by: Aaron Plattner
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
* Makefile.am: Include the test/ subdirectory in the dist tarball.
* include/Makefile.am: Move events.h to sdk_HEADERS and eventconvert.h to
EXTRA_DIST so they're included in the tarball. events.h shouldn't be
included in the SDK either, but for now it's needed by input.h.
This patch adds the following three functions:
bits_to_bytes(bits) - the number of bytes needed to hold 'bits'
bytes_to_int32(bytes) - the number of 4-byte units to hold 'bytes'
pad_to_int32(bytes) - the closest multiple of 4 equal to or larger than
'bytes'.
All three operations are common in protocol processing and currently the
server has ((foo + 7)/8 + 3)/4 operations all over the place. A common set
of functions reduce the error rate of these (albeit simple) calculations and
improve readability of the code.
The functions do not check for overflow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reverts the following four patches:
feb757f384 "XKB: Sanitise vmods for redirected keys"
b5f49382fe "XKB: Sanitise ctrls action"
1bd7fd195d "XKB: Sanitise pointer actions"
61c508fa78 "XKB: Sanitise vmods in actions"
Strictly speaking, the structs used in the server are not part of the client
ABI. Practically, they are as we copy from the wire straight into the
structs. Changing the struct sizes breaks various wire/server conversions.
Even when the structs have the same size, some internal magic causes
conversions to fail. Visible by diffing the output files of:
setxkbmap -layout de; xkbcomp -xkb :0 busted.xkb
setxkbmap -layout de -print | xkbcomp -xkb - correct.xkb
Interestingly enough, busted.xkb is the working one although the output is
incorrect. Revert the four offending patches until the exact cause of this
breakage can be determined.
This patch restores functionality to Level3 modifiers.
X.Org Bug 19602 <http://bugs.freedesktop.org/show_bug.cgi?id=19602>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The number of input devices is MAXDEVICES, not MAX_DEVICES (f781a752e6)
Two comments updated to refer to MAXDEVICES.
MAX_FUNCS in sigio.c was set to 16 if MAX_DEVICES was undefined. If more
than 15 physical input devices were present, this could result in a
failure to install the SIGIO handler for any device above 15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xtst devices get this property assigned automatically so they can be
detected easily by a client.
The property is read-only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than storing a simple boolean in the devPrivate for XTest devices,
store the actual master device's id (since it is constant for the life of
the device anyway).
Callers should use GetXtstDevice now instead of digging around in the
devPrivates themselves.
This patch allows for a cleanup in the creation of new master devices since
GetMaster and GetXtstDevice spare the need for loops, IsPointer checks and
similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
The callers should need to use the dev privates key to look up xtest
devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
This makes the ptr accel api actually sensible from a driver
perspective, since it avoids superfluous device lookups.
Also, makes independent accel contexts possible.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for follow-up checks after a client has written something,
for security modules that enforce a set of valid values a client can set.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Presumably, some intelligent, XI2-aware management app will be calling
XISetClientPointer on behalf of other clients; this check makes sure
the target client has permission on the device.
Requires changing the prototype to return status code instead of Bool.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Master devices provide the union of all attached slave devices' buttons,
i.e. the number of buttons on the master device is always the number of
buttons of the slave device with the highest number of buttons. When slaves
are attached or detached, the master device adjusts the button number to
reflect the new buttons.
On a slave switch, this slave's button labels are copied into the master (up
to slave->num_buttons). The remaining button labels (if any) stay as they
are. Thus, if any of the higher buttons is still pressed, it reflects the
label of the last pressed device that provided this button.
If two devices press the same button and it is differently labelled the last
pressed one will be reflected in the master device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This stops inputstr.h being needed to be included by output drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These grabs are suported through two fake devices inputInfo.all_devices and
inputInfo.all_master_devices. These devices are not part of the device list
and are only initialised for their device id, nothing else.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a passive enter or focus in grab activates, send additional enter or
focus events with mode XIPassiveGrabNotify to the grabbing client.
Likewise, if the grab deactivates, send additional leave or focus out
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Enter grabs are checked for in CheckMotion(), each time the sprite window
changes the current grab is deactivated (if applicable) and the new grab is
activated (if applicable). Exception - if the grab is on a parent window of
the current window since we keep the grab across descendants.
Since CheckMotion() may change the grab status of a device, we mustn't get
"dev->deviceGrab.grab" in ProcessOtherEvents until after CheckMotion().
FocusIn grabs are checked in much the same manner.
The event delivery for grabs replaces the NotifyNormal on window change with
a NotifyGrab on window change. Note that this happens before the grab
activates, so the EnterNotify(NotifyGrab) is still delivered to the window,
not to the grabbing client. This is in line with the core protocol semantics
for NotifyGrab events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Copying all classes into the master device has drawbacks for hybrid devices
(devices that are both mice and keyboards). If such a device posts an event,
it's key classes are moved into the VCP. The key event itself is unaffected
by keyboard grabs and the like.
Partial class copying copies depending on the event and copies the classes
into the right master device (i.e. the VCK for key events, the VCP for
pointer events).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hybrid devices (keys + buttons/axes) the attached master device is
generally the wrong one. One shouldn't post a button event through a
keyboard and vice versa.
GetMaster(dev) returns the right master device for the given type needed.
This may be the MD paired with this device's MD.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ChangeDeviceId would actually overwrite the flags field if deviceid wasn't
present. Aside from the event of course not telling which device generated
it in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This type is only used in XI to give a hint of what type this device may be.
Call it xinput_type for clarity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
This is a shorthand for disabling acceleration, while retaining the
possiblity to use constant deceleration. If constant deceleration is
also unused, it will optimize motion processing.
Other possiblities to deactivate acceleration were quite hidden,
and didn't always work as expected. E.g. xset m 1 1 would retain
adaptive deceleration, while xset m 1 0 would not (in the default
profile).
Also removes the 'reserved' profile; it was unused and it's trivial
to add new ones anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the Xtest virtual slave devices we have 4 devices for each MD
pointer/keyboard pair, plus the AllDevices and AllMasterDevices reserved
deviceids. It's quite easy to hit the current limit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the Xtest virtual slave devices we have 4 devices for each MD
pointer/keyboard pair, plus the AllDevices and AllMasterDevices reserved
deviceids. It's quite easy to hit the current limit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For embedded use, it's convenient to be able to disable the cursor
completely, without having to audit and fix up all your third-party
code (e.g. Mozilla Firefox).
Add -nocursor and -cursor server options to enable and disable the
cursor. The default is still -cursor, but embedded users can run the
server with -nocursor to hide the cursor regardless of what
application developers do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A XTest virtual slave device pair (kbd/ptr) exists for every master
device pair. This is so XTest events are correctly propogated via slave
devices up to Master devices and the classes are correctly changed along
the way. We add the XTest slave device pair to the Virtual Core pointer
and provide a simple way of creating the devices.
A XTest Slave Device is identified by the XTstDevicePrivateKey property
being set in the devices devProperties
XI events are still propagated through the matching device, in the hope the
client knows what it is doing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allocating a slave device is essentially the same as allocating a master device.
Hence we rename AllocMaster to AllocDevicePair and provided the ability to
indicate if a master or slave device pair is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No traces of FID in the xserver nor in the modules listed in
util/modular/xorg.modules
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yes, this means we have even more arguments to GrabDevice. But it beats having
a copy of most but not all of GrabDevice in ProcGrabPointer.
Also, reshuffle the order of parameters, the CARD* status is a return value
and should be last.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split ChangeMasterDeviceClasses into an extra XISendDeviceChangedEvent that
assembles the XI2 wire event for the DeviceChanged event. Re-use this when
detaching the last SD.
Not quite perfect yet, we still copy the device classes from the slave now
rather than from the data we had when the event occured. But it's a start.
(We can now unexport SizeDeviceInfo and CopySwapDevices, not needed anymore)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
