Kernel modesettings support also depends on dri2, see
./hw/xfree86/drivers/modesetting/meson.build
So update meson.build to reflect the changes made in configure.ac by
commit 9c81b8f5b5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Xwayland is usually spawned by the Wayland compositor which sets the
command line options.
If a command line option is not supported, Xwayland will fail to start.
That somehow makes the Xwayland command line option sort of ABI, the
Wayland compositor need to know if a particular option is supported by
Xwayland at build time.
Also, currently, Xwayland is being installed along with the rest of the
common executable programs that users may run, which is sub-optimal
because, well, Xwayland is not a common executable program, it's meant
to be a proxy between the Wayland compositor and the legacy X11 clients
which wouldn't be able to run on Wayland otherwise.
Xwayland would be better installed in `libexec` but that directory is
(purposedly) not in the user `PATH` and therefore the Wayland compositor
may not be able to find Xwayland in that case.
To solve both problems (which options are supported by Xwayland and
where to look for it), add a `pkg-config` file specifically for Xwayland
which gives the full path to Xwayland (`xwayland`) and which options it
supports (using `pkg-config` variables).
The `pkg-config` file also provides the `Version` so the build scripts
can check for a particular version if necessary.
Obviously, Wayland compositors are not required to use the `pkg-config`
file and can continue to use whatever mechanism they deem preferable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently glamor depends on epoxy and gbm, even the autotools build
enforces that.
Follow suite and do the same for the meson build.
v1: Split out from larger patch (Pekka)
Signed-off-by: Emil Velikov <emil.velikov@collbora.com>
There's not really a good reason to keep these separate, the vbe code
requires int10 and is not very large. This change eliminates the
build-time options for vbe; if you build int10, you get vbe.
Gitlab: https://gitlab.freedesktop.org/xorg/xserver/issues/692
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This adds support for xdg-output-unstable-v1 version 3, added in [1].
This new version deprecates zxdg_output_v1.done and replaces it with
wl_output.done. If the version is high enough, there's no need to wait for both
an xdg_output.done event and a wl_output.done event -- we only care about
wl_output.done.
[1]: 962dd53537
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When building Xwayland with neither DRI nor GLamor support enabled with
the Meson build system, the resulting binary would still link against
libdrm and epoxy even though those are not used/needed.
Make sure we require and link against libdrm and epoxy only if needed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Some modules are required in multiple places in the meson file.
Move the actual requirements to the top of the file as a variable so
that updating a version does not require changing the actual value in
multiple places.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Differences from autotools:
* Autotools defined NO_ALLOCA for OSX builds. I don't think we need
this anymore as Xalloc.h is no longer used anywhere in the xserver.
* X11.bin is linked with -u,miDCInitialize, and then libserver_mi
provided to satisfy (just) that. It's been that way since the commit
which added it. We can't write the equivalent in meson due to linker
argument ordering issues, but do we really need to?
* An explicit -Dsecure-rpc=false is required for OSX, since in meson we
don't do the checks that XTRANS_SECURE_RPC_FLAGS did for the existence
of the specific RPC functions required.
Promote the generated file containing the date & time build was
configured to top-level.
Rename it from xf86Build.h to buildDateTIme.h.
Use it as well in XQuartz, stringize BUILD_DATE when needed.
This has always been described as 'experimental'
We don't think this has any users: This mode has been disabled in Cygwin
packages since March 2016. We've never provided the xwinwm WM for x86_64
Cygwin. No one has even asked where the option has gone.
This leaves XQuartz as the only user of the rootless extension.
Remove --enable-windowswm configure option
Remove multiwindowextwm stuff from Makefiles
Remove -mwextwm option
Remove -mwextwm from man-page and help
Un-ifdef XWIN_MULTIWINDOWEXTWM
v2:
Remove rootless include paths
Remove windowswmproto from meson.build
Applying get_pkgconfig_variable() to a not-found dependency was always
documented as an error, but meson 0.49 now actually raises an error[1]:
meson.build:110:4: ERROR: 'xkbcomp' is not a pkgconfig dependency
Check xkbcomp_dep is a suitable dependency type before applying
get_pkgconfig_variable() to it.
[1] but this is more by accident than design (see the discusssion at [2]
et seq.), so who knows where things will come to rest...
[2] https://github.com/mesonbuild/meson/pull/4444#issuecomment-442443301
We were being naughty:
WARNING: Project specifies a minimum meson_version '>= 0.42.0' but uses features which were added in newer versions:
* 0.46.0: {'compiler.has_multi_link_argument', 'compiler.has_link_argument'}
We forget to assign a value to xf86dgaproto_dep if -Ddga=false, which
causes the meson build to fail:
meson.build:448:0: ERROR: Unknown variable "xf86dgaproto_dep".
A full log can be found at /home/lyudess/build/xserver/meson-logs/meson-log.txt
FAILED: build.ninja
So, just set it to an empty dependency to fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Dependencies are ported from the automake build.
v2: Make it a tristate defaulting to 'auto'. Use pkg-config for libaudit.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is silly to have optional based on detection of the protocol
headers, particularly now that we have a single protocol header repo
to install.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
paths returned by get_option('foodir') are potentially relative to prefix
Noticed when comparing manpages generated by a meson build with those
generated by an autotools build
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead, substitute the same values as autotools does
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
meson.build has code to set the module_dir variable to
${libdir}/xorg/modules if the module_dir option string is empty.
However, this has several problems:
1. The variable is only used for an unused @moduledir@ substitution in
the man page. The rule for xorg-server.pc uses option('module_dir')
directly instead.
2. The 'module_dir' option has a default value of 'xorg/modules' so the
above rule doesn't do anything by default.
3. The xorg-server.pc rule uses ${exec_prefix}/option('module_dir'), so
the effect of #2 is that the default moduledir is different between
autoconf and meson. E.g. if ${prefix} is /X, then you get
autoconf: moduledir=/X/lib/xorg/modules
meson: moduledir=/X/xorg/modules
Fix this by using the module_dir variable when generating xorg-server.pc, and by
using join_paths() to assign module_dir unconditionally.
v2: Keep the 'xorg/modules' default path, but use join_paths() unconditionally (Thierry Reding)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>