Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5: Updated the patch to apply to current git HEAD, split up into two
patches (server and modesetting driver) and adjusted the code slightly
to match surrounding code. I also removed the new exported function
ShowCursorCheck(), as instead just changing ShowCursor() to return Bool
should not affect its current callers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
xf86RecolorCursor() may be called directly from XRecolorCursor as well
as from xf86ScreenSetCursor(). In the latter case, the input lock is
already held, but not for the former and so we need to add a wrapper
function that acquires the input lock before performing
xf86RecolorCursor()
References: https://bugs.freedesktop.org/show_bug.cgi?id=99358
This can happen when a module fails to load:
Program received signal SIGSEGV, Segmentation fault.
UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
848 name = mod->VersionInfo->modname;
(gdb) bt
#0 UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
#1 0x00005555555ddd1b in LoadModule (module=module@entry=0x5555559c7ce0 "fbdev", options=0x0, modreq=modreq@entry=0x0, errmaj=errmaj@entry=0x7fffffffe8ec) at ../../../../hw/xfree86/loader/loadmod.c:824
#2 0x00005555555edfe9 in xf86LoadModules (list=list@entry=0x5555559dcf50, optlist=optlist@entry=0x0) at ../../../../hw/xfree86/common/xf86Init.c:1506
#3 0x00005555555ee7bc in InitOutput (pScreenInfo=pScreenInfo@entry=0x5555559abf80 <screenInfo>, argc=argc@entry=4, argv=argv@entry=0x7fffffffeb18) at ../../../../hw/xfree86/common/xf86Init.c:484
#4 0x00005555555a885c in dix_main (argc=4, argv=0x7fffffffeb18, envp=<optimized out>) at ../../dix/main.c:197
#5 0x00007ffff5d582b1 in __libc_start_main (main=0x555555593130 <main>, argc=4, argv=0x7fffffffeb18, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffeb08) at ../csu/libc-start.c:291
#6 0x000055555559316a in _start ()
Fixes: 8e83eacb9e ("loader: Remove unused path and name from ModuleDescPtr")
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
V2:
1. update comment
2. check bustype if PCI
3. configure add libdrm version check for drmGetDevice
Get PCI information from info->fd with drmGetDevice instead of
assuming the info->fd is the first entity of scrn which is not
true for multi entities scrn.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Just a waste of memory. Path was never referenced at all, and name was
only used when unloading the module; we can just as well get the
module's internal idea of its name from VersionInfo.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nobody was ever calling this with a non-null argument for subdir list or
pattern list. Having done this, InitSubdirs is only ever called with a
NULL argument, so it's really just a complicated way of duplicating the
default list; we can remove that and just walk the list directly.
The minor error code was only ever used to distinguish among two cases
of LDR_BADUSAGE. Whatever.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Callers only ever use this for a single directory anyway.
While we're at it, also move xf86DriverListFromCompile near its only
user in the X -configure code (and inline it out of existence), and
remove LoaderFreeDirList as it's unused (since X -configure is just
going to exit anyway, none of that code cares about cleanup).
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There's no reason a driver should ever care about this.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
indent(1) gets confused by function-like macros with no trailing
semicolon, which is fair enough really.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The idea here is that the driver might have once been old enough to not
have the driverFunc slot in DriverRec, with the module ABI not having
changed when it was added. That was ages ago, and drivers always declare
themselves with DriverRec not DriverRec1, so uninitialized slots will
simply be zero.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Everybody using this functionality specifies a major version, which
makes sense. If you don't care about a minor version, that's equivalent
to saying you require minor >= 0, so just say so; likewise patch level.
Likewise ABI class is always specified.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The enum has been unused since at least the removal of elfloader.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This looks like more, but only if you don't compare it to the number
pulled in by misc.h.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This API is dumb. uname(3) exists, feel free to use it, but ideally
write to the interface not to the OS. There are a couple of drivers
using this API, they could all reasonably just not.
This also removes the OS name from the loader subdirectory path search.
Having /usr/lib/xorg shared across OSes is a non-goal here.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Now that users can set the path only via LoaderSetPath(), we can simplify
things.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Afaics the argument hasn't been part of the API since the documentation
has been converted to xml with commit fc6ebe1e1d "Convert LinuxDoc
documents to DocBook/XML"
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Similar to its little brother - LoadSubModule. Currently all call sites
provide NULL anyway ;-)
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The "copying selected object files" message appears as some source
files have the same name, and some objects are included twice.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Detailed mode reports 108 mm x 68 mm which is for smaller display.
Maximum image size reports 15 cm x 10 cm which aligns with its physical
size, use this size instead.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Allow OutputClass config snippets to modify the module-path.
Note that any specified ModulePaths will be pre-pended to the normal
ModulePath. The idea behind this is that any output hardware specific
modules should have preference over the normal modules.
One use-case for this is the nvidia binary driver, this allows a
config snippet like this:
Section "OutputClass"
MatchDriver "nvidia"
Modulepath "/usr/lib64/nvidia/modules"
EndSection
To get the nvidia glx specific glx module loaded, but only when the
nvidia kernel driver is loaded.
Together with the glvnd work done recently, this allows the nouveau
+ mesa and nvidia-binary userspace stacks to co-exist on the same
system without any ldconfig / xorg.conf tweaking and the xserver will
automatically do the right thing depending on which kernel driver
(nouveau or nvidia) is loaded.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Allow using:
Option "PrimaryGPU" "yes"
In an OutputClass section to override the default primary GPU device
selection which selects the GPU used as output by the firmware.
If multiple output devices match an OutputClass section with
the PrimaryGPU option set, the first one enumerated becomes the
primary GPU.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for allowing an OutputClass section to
override the default primary GPU device selection.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for setting options in OutputClass Sections and having these
applied to any matching output devices.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make OutputClassMatches directly take a xf86_platform_device as argument,
rather then an index into xf86_platform_devices. This makes things
easier for callers which already have a xf86_platform_device pointer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
xf86MatchDevice returns a dynamically allocated list of GDevPtr-s,
free this when we're done with it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
shadowDamage is just obfuscation. The other two macros won't work
outside shadow.c since the private key is in fact static there (meaning
the extern decl is a lie).
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In InitOutput, if xf86HandleConfigFile returns CONFIG_NOFILE
(which it does if no config file or directory is present), the
autoconfig flag is set, causing xf86AutoConfig to be called
later on.
xf86AutoConfig calls xf86OutputClassDriverList via the
call tree:
xf86AutoConfig =>
listPossibleVideoDrivers =>
xf86PlatformMatchDriver =>
xf86OutputClassDriverList
and xf86OutputClassDriverList attempts to traverse a linked list
that is a member of the XF86ConfigRec struct pointed to by the
global xf86configptr, which is NULL at this point because the
XF86ConfigRec struct is only allocated (by xf86readConfigFile)
AFTER the config file and directory have been successfully
opened; the CONFIG_NOFILE return from xf86HandleConfigFile
occurs BEFORE the call to xf86readConfigFile which allocates
the XF86ConfigRec struct.
Rx: In read.c (for symmetry with xf86freeConfig, which already
appears in this file), add a new function xf86allocateConfig
which tests the value of xf86configptr and, if it's NULL,
allocates the XF86ConfigRec struct and deposits the pointer
in xf86configptr. In xf86Parser.h, add a prototype for the
new xf86allocateConfig function.
Back in read.c, #include "xf86Config.h". In xf86readConfigFile,
change the open-code call to calloc to a call to the new
xf86allocateConfig function.
In xf86AutoConfig.c, add a call to the new xf86allocateConfig function
to the beginning of xf86AutoConfig to make sure the XF86ConfigRec struct
is allocated.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
If we did not find any non GPU Screens, try again ignoring the notion
of any video devices being the primary device. This fixes Xorg exiting
with a "no screens found" error when using virtio-vga in a
virtual-machine and when using a device driven by simpledrm.
This is a somewhat ugly solution, but it is the best I can come up with
without major surgery to the bus and probe code.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is primarily a preparation patch for fixing the xserver exiting with
a "no screens found" error even though there are supported video cards,
due to the server not recognizing any card as the primary card.
This also fixes the (mostly theoretical) case of a platformBus capable
driver adding a device as GPUscreen before a driver which only supports
the old PCI probe method gets a chance to claim it as a normal screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If foundScreen is TRUE, then all the code below the removed if
will not execute until we reach the return foundScreen; at the
end, so this entire if block is redundant.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Sometimes, Xwayland will try to use a cursor that has just been freed,
leading to a crash when trying to access that cursor data either in
miPointerUpdateSprite() or AnimCurTimerNotify().
CheckMotion() updates the pointer's cursor based on which xwindow
XYToWindow() returns, and Xwayland implements its own xwl_xy_to_window()
to fake a crossing to the root window when the pointer has left the
Wayland surface but is still within the xwindow.
But after an xwindow is unrealized, the last xwindow used to match the
xwindows is cleared so two consecutive calls to xwl_xy_to_window() may
not return the same xwindow.
To avoid this issue, update the last_xwindow based on enter and leave
notifications instead of xwl_xy_to_window(), and check if the xwindow
found by the regular miXYToWindow() is a child of the known last
xwindow, so that multiple consecutive calls to xwl_xy_to_window()
return the same xwindow, being either the one found by miXYToWindow()
or the root window.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1385258
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Vít Ondruch <vondruch@redhat.com>
Tested-by: Satish Balay <balay@fastmail.fm>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Commits 816015648f and
fee0827a9a made it so that
wl_keyboard::enter doesn't result in X clients getting KeyPress events
while still updating our internal xkb state to be in sync with the
host compositor.
wl_keyboard::leave needs to be handled in the same way as its
semantics from an X client POV should be the same as an X grab getting
triggered, i.e. X clients shouldn't get KeyRelease events for keys
that are still down at that point.
This patch uses LeaveNotify for these events on wl_keyboard::leave and
changes the current use of KeymapNotify to EnterNotify instead just to
keep some symmetry between both cases.
On ProcessDeviceEvent() we still need to deactivate X grabs if needed
for KeyReleases.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition by the manual is:
calloc(size_t nmemb, size_t size)
Swap the arguments of calloc() calls to be the right way around.
Presumably this makes no functional difference, but better follow the
spec.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>