Commit Graph

2709 Commits

Author SHA1 Message Date
Kristian Høgsberg
cb402b4112 Move the windows GL files to the xwin DDX.
(cherry picked from commit a8a9b40e55)
2008-06-26 16:14:51 -04:00
Kristian Høgsberg
0234d3d48f Get out of the mesa symlinking business.
This copies over the files generated from mesa/src/mesa/glapi.  There's
a corresponding mesa commit that makes it easy to generate the glapi files
straight into the xserver tree when the XML definitions change.

The only few files that are copied from mesa but aren't generated are
glapi.[ch] and glthread.[ch].  Everything in there is technically DRI
driver API and the whole setup is still a bit fragile, but it's not a new
problem.

The --with-mesa-source configure option is still around since other
parts of the server (XGL and DMX - grep for MESA_SOURCE) need that,
but for common case of building with GLX and AIGLX support, that
option is no longer needed.
(cherry picked from commit e5aad4bc08)
2008-06-26 16:14:51 -04:00
Dan Nicholson
d3a2e060bf Fix up paths for GL/glx -> glx renaming
(cherry picked from commit c76fddeea2)
2008-06-26 16:14:51 -04:00
Kristian Høgsberg
d325a207c8 Use LD_EXPORT_SYMBOLS_FLAG when linking Xnest.
(cherry picked from commit f558c7d4d1)
2008-06-26 16:14:51 -04:00
Kristian Høgsberg
bd81faff8c Drop glcore GLX provider.
Obsoleted by the DRI swrast driver.
(cherry picked from commit 77ff8fd507)
2008-06-26 16:14:51 -04:00
Jeremy Huddleston
d88da6638e Moved Apple GL bits into our DDX subtree
(cherry picked from commit c9356f3289)
(cherry picked from commit d09c520b32)
2008-06-26 16:14:51 -04:00
George Sapountzis
988b1b8df3 Add loader for the swrast dri driver.
(cherry picked from commit 6ff6465931)
2008-06-26 16:14:51 -04:00
George Sapountzis
1efc0329b1 glcore: drop GLcore (files)
(cherry picked from commit a88c6b6646)
2008-06-26 16:14:50 -04:00
George Sapountzis
9b4d5b6521 glcore: drop GLcore (build system)
(cherry picked from commit dd7a53f8f2)
2008-06-26 16:14:50 -04:00
George Sapountzis
1ea2e69cfc glcore: build from mesa, dlopen from xorg
* The GLcore interface is disposable
* GLcore is installed in DRI_DRIVER_INSTALL_DIR which is overloaded for
  GLX_PROVIDER_INSTALL_DIR
(cherry picked from commit 567d389d47)
2008-06-26 16:14:50 -04:00
Donnie Berkholz
f2c30a57e3 glcore: prepare for dynamic loading
glcore gets linked with -ldl, -lpthread for s3tc and glapi
xserver needs
        DLOPEN_LIBS - to dlopen the glcore dso
        LD_EXPORT_SYMBOLS_FLAG - to export symbols for glcore to use

the ld flag is added to kdrive only when GLX is enabled, the net overhead for
Xephyr is ~155KB, could be reduced with --dynamic-list.
(cherry picked from commit efb723e166)

Conflicts:

	configure.ac
2008-06-26 16:14:50 -04:00
Adam Jackson
429b2a97a0 Bug #11842: Fix emulation of int1A PCI BIOS services.
Use only %di to name the PCI register to read/write, rather than %edi.
DOS is only expecting the base PCI config space anyway, and the BIOS
might be using the high bits of %edi.
(cherry picked from commit 9e5b3deafb)
2008-06-24 14:10:12 -04:00
Paul Bender
2334ff9bb2 Bug #15665: Fix building without Composite.
(cherry picked from commit 4c4e06af79)
2008-06-24 10:45:16 -04:00
Adam Jackson
85e598cc62 Remove some default modes that really shouldn't be in the default set.
(cherry picked from commit 59510a7643)
2008-06-24 10:41:27 -04:00
Alan Coopersmith
dfb326790e Restore return type on xf86SetScrnInfoModes
Seems to have been accidentally lost by commit 	76943fec86
(cherry picked from 925e895b86 commit)
2008-06-23 19:32:01 -07:00
Jesse Ruffin
4c8a84acf5 Bug #16302: Fix GLX drawable refcounting in DMX.
(cherry picked from commit 3b58782692)
2008-06-23 14:35:46 -04:00
Adam Jackson
89d73d7595 Implement bswap in x86emu.
Yes, this is a 486+ instruction and thus not strictly legal in vm86
mode, but enough BIOSes use it (looking at you VIA) that we might as
well implement it.
(cherry picked from commit c8d066a151)
2008-06-23 14:01:15 -04:00
Matthieu Herrb
b0df9a6a42 preserve errno around the SIGIO handler
(cherry picked from commit 19c7e9da55)
2008-06-20 13:36:16 -04:00
Adam Jackson
7822a3d05f XAA: Disable offscreen pixmaps by default.
Say Option "XaaOffscreenPixmaps" to turn them back on.

Apropos of bugs #13795 and #15098.  Not yet applied to master as this wants
a proper solution someday, but then, those bugs aren't closed yet either.
2008-06-17 16:10:51 -04:00
Ian Romanick
fba700f1f6 Bug #15169: Make the server build again on Alpha.
Still won't work until the kernel makes the resource files actually exist.

(cherry picked from commit f3490d3eba)
2008-06-17 10:48:41 -04:00
Eamon Walsh
2552026664 Make devPrivates lookup functions ABI instead of static inlines.
This is required to preserve compatibility across changes to the
internal representation of the privates list.
(cherry picked from commit 2d7ba09dc4)
2008-06-13 16:45:08 -04:00
Dave Airlie
21248705bb modes: make aspect choosing work on single output case.
In the single output enabled case we never enter the loop and test
never gets set and so we fail to match a good mode.

This was causing my 2560x1600 to end up at 2048x1536.
2008-06-12 14:54:56 +10:00
Julien Cristau
53a84d75c6 xfree86: fix build on GNU/kFreeBSD
GNU/kFreeBSD defines __FreeBSD_kernel__, but not __FreeBSD__.
Unify preprocessor conditionals between variable declaration and use.
Debian bug #482550.
(cherry picked from commit e6cbb1e11e)
2008-06-12 10:01:41 +10:00
Paulo Cesar Pereira de Andrade
60990c69b4 Correct a NULL pointer deference
The problem happens if Monitor/Card combo doesn't provide EDID info,
and the XFree86-VidModeExtension extension is used.

Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
(cherry picked from commit c8af7ce35a)
2008-06-09 14:09:39 -04:00
Drew Parsons
c00ff932f8 Disable D-BUS from Xprint.
Use dummy config functions to replace those from config/config.c, and
therefore do not link Xprt with $CONFIG_LIB.

Works around an endlessly spinning loop in dix/dispatch.c::Dispatch()
(WaitForSomething() not waiting) when built with dbus, which was
causing Xprt to use 95% cpu.
(cherry picked from commit 2a3d1421e0)
2008-06-09 13:57:03 -04:00
Drew Parsons
2f994cb00e Create dix/libXpdix.la for Xprint-specific build of libdix.la
(cherry picked from commit 4e2c6dbabdbbaaca213fd08edd422de15d0900cc)

required because of commit 7c0709a736,
which made requestingClient in dix specific to Xprint only.
Add to XPRINT_LIBS in hw/xprint/Makefile.am in front of
$(XSERVER_LIBS) to override definitions in libdix.la for standard xservers.

Follows 571206832d (providing -DXPRINT
to xprint subdirs).

Note it may be possible to restructure the code so that
requestingClient is stored elsewhere than in dix. See discussions
following http://lists.freedesktop.org/archives/xorg/2008-March/033844.html
If this is done it may be possible to revert this commit (if not 571206...).
(cherry picked from commit 966ae1781f)
2008-06-09 13:56:59 -04:00
Drew Parsons
30774d6b3c Define XPRINT in XPRINT_CFLAGS (configure.ac)
-DXPRINT had only been set for Xprt in hw/xprint/Makefile.am
After commit 7c0709a736 it is also
required for ps/PsArea.c and PsFonts.c to ensure ‘requestingClient’ is
defined, so make it a global Xprint definition in configure.ac.
(cherry picked from commit 28a6719fd486d9a9cecad0b057d9ea7c59c66055)
(cherry picked from commit 571206832d)
2008-06-09 13:56:53 -04:00
Dave Airlie
50e77eb838 int10: add pci_device_enable support on Linux
(cherry picked from commit ea4ec9e998)
2008-06-09 13:29:32 -04:00
Adam Jackson
5efe36f7af Fix reduced-blanking mode filtering in RANDR 1.2.
If the monitor isn't reduced-blanking (either through EDID logic, or
config file setting), then remove RB modes from the default pool.  Any
RB modes from the driver and config file pools will stick around though;
you asked for them, you got them.
(cherry picked from commit 0178b6a4ab)
2008-05-19 11:27:58 -04:00
Adam Jackson
0230f39fa3 RANDR 1.1 compat: remove senseless comparison against the virtual size.
(cherry picked from commit aad1c37b09)
2008-05-16 11:11:40 -04:00
Adam Jackson
95985256ef xf86SetDesiredModes(): Skip disabled CRTCs first thing.
(cherry picked from commit 14726b776d)
2008-05-16 11:11:40 -04:00
Adam Jackson
bedcf98558 Fix initial mode selection even harder.
The first guess used to be "is the preferred mode for one output the
preferred mode on all outputs".  Instead, do "find the largest mode that's
preferred for at least one output and available on all outputs".
(cherry picked from commit 459f34b089)
2008-05-16 11:11:40 -04:00
Adam Jackson
bd50c41f6f Redo RANDR compatibility output selection.
Old logic was just the first one that happened to have an associated
CRTC.  The new logic tries to find one that's definitely connected, has
probed modes, and has the largest candidate mode.
(cherry picked from commit 96111c1547)
2008-05-16 11:11:40 -04:00
Adam Jackson
0b031442fe Re-add sync range inference from legacy setup to RANDR 1.2.
(cherry picked from commit a4bbe1c8bc)
2008-05-16 11:11:39 -04:00
Adam Jackson
cfff55a2bb Fix fbdevhw initialization for PCI drivers.
graphics/fb%d, not graphics:fb%d.  Thanks sysfs.  Thysfs.
(cherry picked from commit 86678e7cc2)
2008-05-16 10:03:24 -04:00
Julien Cristau
f2278a882f kdrive: allow disabling Composite
KdInitOutput() used to enable Composite when it was disabled by default,
but now this hack prevents ``-extension Composite'' from working.
Remove it, as Composite is enabled by default anyway.
(cherry picked from commit 9dfb525f6c)
2008-05-11 23:38:03 +02:00
Adam Jackson
64948dc667 Bug #13104: Remove broken XAA a1 glyph fast path.
(cherry picked from commit f17ba5d584)
2008-05-08 16:12:01 -04:00
Adam Jackson
f2aa0000a2 Bug #13104: Don't let XAA glyph pixmaps anywhere near video memory.
Since glyphs are stored in pixmaps now, they can make their way into VRAM,
which invalidates a bunch of fast-path assumptions in the XAA code.  Thus
you end up doing color-expands or WriteBitmap from la-la land and your
aliased glyphs go all funny.

Since XAA isn't ever growing the ability to do sane glyph accel, just force
glyph pixmaps into host memory by catching them at CreatePixmap time.
(cherry picked from commit 718652eaf9)
2008-05-08 16:09:56 -04:00
Jordan Crouse
fd0ec73bcb xf86: Change AutoConfig driver for PCI ID 022:2091 to 'geode'
(cherry picked from commit 4fa89fbe18)
2008-04-30 11:51:08 +03:00
Kristian Høgsberg
5a2b538c1b Make DRI2 a serverlayout/serverflags option.
Add xf86DRI2Enabled() to export the value of the setting.
(cherry picked from commit 35982bc109)
2008-04-15 11:48:33 +10:00
Matt Turner
db00d4a4dc Check for __x86_64__ when we check for __amd64__
It seems Intel C Compiler neglects to define __amd64__, __amd64, or
amd64, but *does* define __x86_64__.
(cherry picked from commit 1fa4de80fc)
2008-04-15 11:47:48 +10:00
Peter Hutterer
099d1bef22 dix: Call DeleteInputDeviceRequest from CloseDownDevices (#14418)
The DDX (xfree86 anyway) maintains its own device list in addition to the one
in the DIX. CloseDevice will only remove it from the DIX, not the DDX. If the
server then restarts (last client disconnects), the DDX devices are still
there, will be re-initialised, then the hal devices come in and are added too.
This repeats until we run out of device ids.

This also requires us to strdup() the default pointer/keyboard in
checkCoreInputDevices.

X.Org Bug 14418 <http://bugs.freedesktop.org/show_bug.cgi?id=14418>
(cherry picked from commit 6d22a9615a)
2008-04-15 11:47:04 +10:00
Dave Airlie
566037a914 quirk: add quirk for ACR 640x350 default mode is wrong
RH #440186
(cherry picked from commit b19027fbae)
2008-04-15 11:46:36 +10:00
Adam Jackson
9a908769e6 Fix PCI config space cycles from int10 emulator.
The top bit of 0xCF8 is an enable bit, not part of the domain.  Sending
cycles to domain 128 instead of domain 0 is rarely the right thing to do.
(cherry picked from commit cc7c045bae)
2008-04-07 10:32:07 -04:00
Dave Airlie
b2704de8a7 quirk: add quirk for ACER EDID
(cherry picked from commit f0915fb3c4)
2008-04-07 10:31:46 -04:00
Hong Liu
8ccdaa288a Bug #15160: quirk Proview AY765C
prefer first detailed timing
(cherry picked from commit ebc56aca8b)
2008-04-07 10:30:38 -04:00
Goneri Le Bouder
8059b57f9b xfree86: don't crash in AutoConfig if the primary device is not pci
Only call matchDriverFromFiles() if we found a pci device.
Debian bug#472823 (http://bugs.debian.org/472823).
(cherry picked from commit 9500033b9e)
2008-04-07 10:30:26 -04:00
Dave Airlie
a2fcdfd5f9 quirk: fix LPL monitors properly.
no point having a h cm fix when we really want to copy the sizes from the
other place.

RH BZ 435216
(cherry picked from commit c747030a49)
2008-04-07 10:26:59 -04:00
Kristian Høgsberg
d1dd774910 Only autoload RECORD if it was enabled.
(cherry picked from commit 16a8ce7558)
2008-04-04 11:47:08 -04:00
Kristian Høgsberg
81af92f5d9 Pick up dri2proto from the standard proto header include path. 2008-04-02 19:22:05 -04:00