Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86AutoConfig.c: In function ‘FreeList’:
xf86AutoConfig.c:123: warning: passing argument 1 of ‘free’ discards
qualifiers from pointer target type
/usr/include/stdlib.h:488: note: expected ‘void *’ but argument is of
type ‘const char *’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Input drivers may use valuator masks for internal state. Having all the
valuator_mask_* functions available will help.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Bump ABI_XINPUT_VERSION minor.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Back when we had RAC this was a vaguely meaningful thing. Since then
it's been a glorified (and confusing) wrapper around xf86BlockSIGIO.
Note that the APM and VT switch code are unusual relative to other code
that cares about SIGIO state. Most callers push a SIGIO disable to
create a critical section for the duration of the caller's stack frame,
but those two effectively disable SIGIO after their return and re-enable
on their next entry.
Reviewed-by: Tiago Vignatti <tigo.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Enter was changing server operating state, Leave wasn't. Which was
wholly redundant, since all callers of Enter would immediately change
the operating state to exactly what Enter had just done.
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has never been buildable in any modular server release.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
What is this, I don't even.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
After collecting the driver's default options, report the list of options
set for the device before calling PreInit(). This helps with debugging those
cases where options are not merged correctly.
xf86OptionListReport reports with verbosity 5, higher than the default
verbosity so this won't generate logspam in the default case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Current order causes the user-configured option list to be overwritten with
the default list supplied by the driver. Swap around so we overwrite the
driver's default values instead.
This only affected options supplied by the driver such as XkbLayout in the
case of evdev.
Reported-by: Sebastian Glita <glseba@yahoo.com>
Reported-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Sebastian Glita <glseba@yahoo.com>
If a device doesn't send valuators, don't try to move its position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Commit 606e079cc4 moved the visual
field in WindowOptRec, breaking the extension module ABI.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides for separate sizes for the screen scanout and rendering
buffer and the application-visible screen size.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Single allocation point for input devices, most notably a single point to
reset default values.
Without this patch, the file descriptor default was -1 for hotplugged
devices and 0 for config devices. Drivers that don't overwrite the default
themselves would thus fail if configured in the xorg.conf.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Options set in the configuration file were unconditionally overwritten by
the server. Merge the already existing options and the new options together
instead of just overwriting ones.
Introduced in commit 2199842ed5
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Thu Sep 2 10:52:54 2010 +1000
xfree86: remove extraOptions field from IDevRec.
X.Org Bug 32115 <http://bugs.freedesktop.org/show_bug.cgi?id=32115>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: David Ronis <ronis@ronispc.chem.mcgill.ca>
Some devices should be initialised as floating from the start (e.g.
Joysticks and accelerometers benefit from this). Currently users use the
"SendCoreEvents" "off" flag for this, which isn't the most appropriate
naming.
Add an option "Floating", deprecate the others. Still parsed and handled by
the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No point calling the no-fail-alloc if you check for failure and your
only caller checks for failure.
No point calling calloc to zero fill memory you're about to memcpy over.
In the unlikely event of a loss of memory allocation, drop your previous
allocations before returning to others.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
static function only called from the matchDriverFromFiles function
that's inside #ifdef __linux__ section
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reput all ports when the display mode or panning has been changed by
RandR code. This makes the overlays appear in the correct position
on the screen.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Add a new hook ModeSet that will be called after display mode is
changed, or after the display has been panned.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Pass all of the src/dst coordinates to ReputImage so that drivers
don't necessarily have to do double bookkeeping.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Document the fact that ReputImage is used for stills as well as images.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
PutImage/PutStill respect the GC clip, however ReputImage does not.
PutImage/PutStill are supposed to be oneshot operations so ReputImage
should never expand the area covered by the clip, instead it should
only shrink if the window clip shrinks. So commandeer clientClip
into use by ReputImage and initially make it a copy of the original
GC composite clip. Whenever ReputImage needs reclipping update
clientClip with the newly calculated composite clip.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
clipOrg never changes except when clientClip changes, so instead of
keeping copies of both originals translate clientClip by clipOrg
immediately and just keep the translated clientClip.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Also reput PutVideo/GetVideo ports in AdjustFrame. This makes the
overlay track the screen panning instead of staying stationary in the
wrong place.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Nothing should change in AdjustFrame that would need the composite clip
to be recomputed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
When ClipNotify gets called for a visible window, reput instead of
stopping the port. This eliminates nasty overlay flickering that
happens during clip changes.
If the window is invisible or if ReputImage isn't supported stop
and remove the port from the window as was done before.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Modify xf86XVReputOrStopPort() to allow stopping of all types of ports.
Will be useful later.
No functional change.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
WinPriv->PortRec should never be NULL as WinPriv itself would be removed
from the list when the port is removed from the window.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
That helps us get rid of:
| CC xf86Config.lo
| xf86Config.c: In function ‘T.174’:
| xf86Config.c:1228: warning: ‘Pointer$module’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$module’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$drv’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$drv’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$type_name’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$type_name’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$private’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$private’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$dev’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$dev’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$fd’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$fd’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$set_device_valuators’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$set_device_valuators’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$switch_mode’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$switch_mode’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$control_proc’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$control_proc’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$read_input’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$read_input’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$device_control’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$device_control’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$flags’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$flags’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$next’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$next’ was declared here
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a more accurate name for the actual functionality than
allowEmptyInput. Historically, allowEmptyInput has allowed the server to
start with no input devices. Since 1.4 and the introduction of VCP and VCK,
there are always two input devices present.
allowEmptyInput was changed in behaviour to essentially "ignore xorg.conf
devices or not", auto-adding the built-in devices if disabled.
Rename to forceInputDevices, because that's essentially what it does. When
disabled (i.e. when hotplugging is enabled), it disables all
mouse/kbd/vmmouse devices configured in the xorg.conf file.
When enabled, it forces the traditional behaviour for input devices:
- use input devices configured in the server layout
- if none are configured, use the first pointer and the first keyboard
device in the xorg.conf
- if none are configured, create the default pointer/keyboard devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
An estimated 100% (rounded down to the nearest percent) of the people who
have this in their configuration don't actually know what this option does.
Protect the users from themselves.
IIRC, AEI on was useful for some time between 1.4 and 1.5 and never since.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
