ba2d39dd54 introduced warnings:
xf86Mode.c: In function ‘xf86CheckModeForDriver’:
xf86Mode.c:986: warning: passing argument 1 of ‘modeInClockRange’ from incompatible pointer type
xf86Mode.c:253: note: expected ‘ClockRangePtr’ but argument is of type ‘ClockRangesPtr’
xf86Mode.c:1002: warning: passing argument 1 of ‘modeInClockRange’ from incompatible pointer type
xf86Mode.c:253: note: expected ‘ClockRangePtr’ but argument is of type ‘ClockRangesPtr’
Because I foolishly didn't notice that we had types with nearly
identical members named ClockRange and ClockRanges. The latter
contained an extra 'strategy' member at the end, which claimed to be
needed by the vidmode extension. Of course, this was a lie: the only time
we'd use it was in mode validation, for drivers using LOOKUP_CLKDIV2 with
non-programmable clocks. The only driver using LOOKUP_CLKDIV2 is
rendition, which has a programmable clock. The only driver using the
ClockRanges type was smi, which did not use it for its 'strategy' member,
so has been fixed to use ClockRange instead.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
While the identifier is likely set before the input classes are merged, the
driver may not be. Hence don't check for a driver before we've completed
configuration for this device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Refactored code into the parser to allow the freeform boolean types used
in Option entries to be used in other configuration entries. This isn't
as powerful as allowing "No" to precede the option names, but it atleast
gives a common handling of "yes", "no", etc.
A type xf86TriState has been added to support an optional boolean. This
allows the boolean sense of the value to be kept while providing a means
to signal that it is unset.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Any input device with this option will be automatically added to whichever
server layout is selected at startup. This removes the need to reference a
device from the ServerLayout section. The two following configuration are
identical:
CONFIG 1:
Section "ServerLayout"
InputDevice "foo"
EndSection
Section "InputDevice"
Identifier "foo"
...
EndSection
CONFIG 2:
Section "InputDevice"
Identifier "foo"
Option "AutoServerLayout" "on"
...
EndSection
The selection of the server layout affects both explicitly specified
layouts and the implicit layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp at keithp.com>
Add a new command line parameter, -configdir, to specify the config
directory to be used. Rules are the same as -config for root vs. user
privileges.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
I don't think this one has been in use since 2003.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Most of the Xv Put/Get operations have an off by one error in the
viewport clipping.
Apparently PutImage was fixed at some point but the same code was
already copy-pasted all over the place, and so the other operations
still suffer from the bug.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously it was trying to set the same value as the default one. Sigh.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Technically, disabling AEI is the right suggestion. AEI off forces the
server to init the built-in defaults for input devices (or pick the first
one from the config file). At the same time, hotplugging is still available
with AEI off.
Unfortunatly, in the vast majority of cases users want to simply disable
hotplugging or have a working server while the local HAL configuration is
broken or missing. Disabling AEI will lead to duplicate events, triple
keystrokes, etc. once the configuration works again.
It's not actually required to remove AEI once hotplugging works again,
though it will in many cases lead to a setup that appears broken.
Asking users to disable AutoAddDevices instead means those users disable
hotplugging, can then fix the HAL setup and they _must_ remove the config
line again to test if hotplugging works again. Which doesn't leave them with
a broken config once everything is working nice and dandy. Less bugreports,
everybody wins.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: James Cloos <cloos@jhcloos.com>
Should probably also be applied to stabler xserver branches too.
Luc Verhaegen.
From a22bc20721bad506d8fa9772b1258568cbffe7d2 Mon Sep 17 00:00:00 2001
From: Luc Verhaegen <libv@skynet.be>
Date: Wed, 11 Nov 2009 15:52:39 +0100
Subject: [PATCH] Xv: Fix AdjustFrame when driver implements ReputImage.
Finally fixes fd.o #4653, filed more than 4 years ago.
Patch can be happily applied to all modular Xorg versions.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xorg creates its log file following the umask of the user running
startx, which may result in a world-writable log. Set umask to 022 to
prevent this.
Debian bug#555308 <http://bugs.debian.org/555308>
See also http://thread.gmane.org/gmane.comp.security.oss.general/2299
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's let glibc do the right thing for dense/sparse selection.
The _alpha_iobase code has been unused since the switch to libpciaccess. It
really should have been killed by fba700f1f6.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The event fd may be invalidated by the pInfo->read_input call. If it is
invalidated, the subsequent FD_CLR call will segfault. Thus, the FD_CLR
call must precede the pInfo->read_input call.
Signed-off-by: Chase Douglas <chasedouglas@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Existing video drivers will get the console enabled by default.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This was initially fixed by commit 3932a84857
but then (presumably not intentionally) undone by commit
1d54479cb3 .
Signed-off-by: Hans Nieser <hnsr@xs4all.nl>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
* mattst88/master:
[alpha] assume we have __NR_pciconfig_iobase
[alpha] don't return from void functions
Fix undefined symbols on alpha
Fix breakage on alpha caused by c7680befe5
Revert "alpha: kill xf86SlowBCopyToBus and xf86SlowBCopyFromBus"
When testing if an fd is valid, the required construct is >= 0, not > 0.
[Daniel: Fixed up the Linux MTRR case as well.]
Signed-off-by: Martin Ettl <ettl.martin@gmx.de>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The vesa driver still uses slowbcopy_frombus and slowbcopy_tobus.
This reverts commit 5ef53a94ce.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All input drivers use xf86PostKeyEventP indirectly now and have been since
it exists. I guess that qualifies it as tested - no need to spam the logs.
Reported-by: Felix Wenk
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Removing DGA ended up breaking any drivers calling into the old
xf86DiDGAInit function as it tried to see if DGA was already enabled
and ended up crashing if the VT wasn't completely initialized. Oops.
Also, if the driver initializes DGA itself, have the DiDGA
initialization overwrite that information as the DiDGA code will call
ReInit on mode detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The DIX event queue is allocated before InitInput is called, so fetch
the pointer there and not randomly at other times. This avoids failing
to fetch the pointer sometimes during server regen and then smashing
memory through the stale pointer from the previous server generation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86MatchDevice returned malloc'd storage containing the list of
devices to look at; make sure that gets freed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
49b93df8a3 made the hard dependency on
a "fixed" font go away but only Xorg could use the built-ins fonts by
default.
With this commit, all DDXs get "built-ins" appended to their FontPath, not
just Xorg.
Tested with Xorg, Xvfb and Xnest.
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>