Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Linux test code fixed by: Keith Packard <keithp@keithp.com>
If configure is generated with xorg-macros 1.16 or later, this allows
builders to --enable-unit-test and run the tests other than the xi2
tests which require ld -wrap (and are still wrapped in if HAVE_LD_WRAP
in tests/xi2/Makefile). If an older xorg-macros is used, the existing
behaviour is preserved of requiring ld -wrap for all unit tests, but
no side effects occur, so the minimum xorg-macros version is not raised.
If unit testing is enabled without ld -wrap, then we create a bogus
"xi2-tests" script just to report that we're skipping them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This should force the server to have -fno-strict-aliasing even once it
is removed from the warning flags.
See: https://bugs.freedesktop.org/show_bug.cgi?id=31238
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Every module building against xorg-server does not *Require* pixman nor
libpciaccess. If such modules need pixman or pciaccess, they should be
depending on them directly rather than inheriting a dependency from
xorg-server. To do this, they should use PKG_CHECK_MODULES in configure.ac
to check for pixman-1 or pciaccess and include the apporpriate _LIBS variable
to the appropriate _LDFLAGS variable in Makefile.am
This also moves pixman-1 to Requires.private, so CPPFLAGS is set right to
to satisfy include dependencies but avoid linking needlessly.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
This removes the need to pass the following to configure on darwin:
--disable-pciaccess -disable-int10-module --disable-vbe --disable-vgahw --disable-libdrm
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
No semantical changes. Just moved code around, grouping PCI related stuff in a
single chunk.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is slightly draconian, but that API is just awful. In all but
one case in the callers it's used to get a map of some legacy VGA
memory, and it would be cleaner for the caller to just call
pci_device_map_legacy.
The sole exception is in the vesa driver, which uses it to avoid having
to look up which device the BAR belongs to. That's similarly trivial to
fix.
Having done that, Linux's PCI layer is now very small indeed.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
pciaccess handles this now.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
udev_enumerate_add_match_tag() and udev_monitor_filter_add_match_tag()
are mostly optimizations, hence simply skip these calls if they are not
available in the installed version of libudev.
This should fix the build on older versions of udev.
[airlied: fixes tinderbox failures on RHEL6]
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Current autoconf versions are very unhappy when code fragments are not
wrapped in AC_LANG_SOURCE macros, generating errors like:
configure.ac:723: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:606: AS_IF is expanded from...
../../lib/autoconf/general.m4:2032: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2053: AC_CACHE_CHECK is expanded from...
configure.ac:723: the top level
Signed-off-by: Keith Packard <keithp@keithp.com>
This does not really handle hotplug (it's handled inside the kernel,
by the 'mux' devices), but uses the wscons console driver
configuration to figure out the keyboard layout and the list of
pointing devices found by the kernel.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
"configure --with-int10" is not a valid configuration, and the check for
sys/vm86.h and sys/io.h is not used. Delete it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This is the last mention after ccfaf82367
quit using the variable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tiago Vignatti posted an identical patch in June 2010, which I only
noticed after getting the above reviews. His patch was:
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Pasting from ./configure --help's output, one would get:
| configure: WARNING: unrecognized options: --disable-shm
Fix the help string to include the previously missing “mit” bits.
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
If config/udev was enabled, this would default to base, which means that
after regen the devices would get the wrong rules, and hilarity would
ensue.
It's probably safe to default to evdev unconditionally on Linux by now.
Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Unable to find any use of the PERL Automake variable.
It was used in hw/xfree86/scanpci around 2005.
Should it ever be needed, use XORG_WITH_PERL macro.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use the new event types so we can pass a valid SBC value to clients.
Fix up the completion calls to use CARD32 instead of CARD64 to match
the new field size.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
automake generates _DEPENDENCIES from _LIBADD, but it strips out variables.
This resulted in not relinking if some components were rebuilt (like
libdix, libos, etc).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
sdksyms moved from hw/xfree86/loader to hw/xfree86, so the
configure-time create of sdksyms.dep needs to reflect that
change. Otherwise, make might be confused by a missing file and (more
importantly to me) hw/xfree86/loader/sdksyms.dep will be left around
after 'make clean' causing 'make distcheck' to fail.
Passed through from configure.ac via manpages.am
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This matches a change in xorg-sgml-docs whereby the masterdb will look for
the target dbs into the same location as the generated documents.
The target dbs are now installed alongside the generated documents.
Previously they are installed in $prefix/sgml/X11/dbs alongside masterdb which
has the potential of installing outside the package prefix and cause
distcheck to fail when user does not have write permission in this package.
Requires XORG_CHECK_SGML_DOCTOOLS(1.8) which was released 2011-06-11
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bumping this dependency means some additional macros can be used, like
_X_UNUSED.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Implements pointer barriers as specified by version 5 of the XFIXES
protocol. Barriers are axis-aligned, zero-width lines that block pointer
movement for relative input devices. Barriers may block motion in either
the positive or negative direction, or both.
v3:
- Fix off-by-one in version_requests array
- Port to non-glib test harness
- Fix review notes from Søren Sandmann Pedersen, add tests to match
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Relocate the docs under the doc subdir.
Remove redundant xml subdir.
The xmlrules set of makefiles are no longer used.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the appropriate location for reusable configuration and/or
makefile artifacts as opposed to picking one of the subdirs where
it is used.
It shields them from future doc reorg as every subdir
will refer to the root package which never changes location.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makefile is used to build the 60+ docbooks in xorg.
Dtrace is a user document and should be located under doc subdir.
This user document can now refer to external user/specs docs
or can be referred to by such documnets.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Maintaining either requires full knowledge of both.
It's not obvious one has to check the usage of global variables
in devbook.am when maintaining doxygen target. Or vice-versa.
Being in their respective directory, one less thing to worry about.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The user/specs docs now have external references support.
Developers doc are not installed so they do not participate.
However, using a similar makefile shared amongst developers
document reduces maintenance and is forward looking.
Man pages being out of here, reorg developers docs under the same roof.
Drop the obsolete sgml subdir.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Look for Khronos OpenGL spec files using pkg-config, rather than downloading them
Also add a --with-khronos-spec-dir=PATH configure option so XWin can be directed
where to find these files without using the khronos-spec-files package
XWin with AIGLX requires OpenGL spec files in order to generate wrapper code which:
(1) thunks from the glapi dispatch table which uses the default cdecl calling convention
to native GL functions using the stdcall calling convention.
(2) performs function address lookup for OpenGL 1.2+ functions, which are treated
as extensions and so not directly linkable.
v2: KHRONOS_SPEC_DIR is only valid when XWIN_GLX_WINDOWS is defined. Avoid 'make dist'
seeing invalid dependencies by only including rules using KHRONOS_SPEC_DIR if
XWIN_GLX_WINDOWS is defined
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
