The callers should need to use the dev privates key to look up xtest
devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
This makes the ptr accel api actually sensible from a driver
perspective, since it avoids superfluous device lookups.
Also, makes independent accel contexts possible.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allows security modules to enforce what property contents can be set by
clients. Uses the new DixPostAccess bit to distinguish between the
existing call made during the lookup (with the old property data) and
this new call. Note that this only applies to writes, prepends, or
appends to existing properties; for new properties the existing
DixCreateAccess hook call may be used since it includes the new data.
Refer to the XACE-Spec document in xorg-docs, section "Property Access."
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Presumably, some intelligent, XI2-aware management app will be calling
XISetClientPointer on behalf of other clients; this check makes sure
the target client has permission on the device.
Requires changing the prototype to return status code instead of Bool.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
LookupClientResourceComplex is used by DRI1 code to find and free a DRI
drawable in a callback, however when the DRI code returns this->value
is now pointing at freed memory. It seemed easiest to store the value
to a temporary and return it afterwards.
Another option might be a new FreeClientResourceComplex or one that
also returns the id, so we can free it using an alternative means.
found using valgrind.
amended along ajax's suggestions
Maps are CARD8s, therefore checking for values above 255 is completely
unnecessary. Moreover, 0 is a valid value for maps, so the check wasn't
even correct to begin with. This fixes bug #22392, which was uncovered
by commit 280b7f92d7.
Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Master devices provide the union of all attached slave devices' buttons,
i.e. the number of buttons on the master device is always the number of
buttons of the slave device with the highest number of buttons. When slaves
are attached or detached, the master device adjusts the button number to
reflect the new buttons.
On a slave switch, this slave's button labels are copied into the master (up
to slave->num_buttons). The remaining button labels (if any) stay as they
are. Thus, if any of the higher buttons is still pressed, it reflects the
label of the last pressed device that provided this button.
If two devices press the same button and it is differently labelled the last
pressed one will be reflected in the master device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
MD's will soon be the union of all devices anyway. XTest pointers are only
for the core protocol XTest stuff, so 7 buttons (lmr + 4 wheel buttons)
should do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some files (notably those merged with MPX before XI2 came along) didn't use
a 'xi' prefix. This patch changes all of them to meaningful names.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This stops inputstr.h being needed to be included by output drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
event->type is always GenericEvent for XI2 events. Instead, XI_ButtonPress
(the generic event's evtype must be stored.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
it's unclear whether there actually is a problem, but in a very similar
case there is (bug#21456). Also, integer addition is generally faster.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Valuator events need to include the device's state, while other device
events need to include the state of the core devices.
Reported-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetMaster is more reliable than GetPairedDevice, it always returns the
keyboard/pointer if desired, even if the wrong device was passed in.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Let EventToXI, EventToCore and EventToXI2 return BadMatch if there's no
matching event for this protocol spec.
Adjust the delivery paths to cope with BadMatch errors (and clean them up on
the way).
As a side-effect, this fixes server crashes on proximity events for a
grabbed device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For proximity events, the XI2 type is 0 and inputMasks never got set in the
preceding condition. As a result, proximity events got never delivered.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These grabs are suported through two fake devices inputInfo.all_devices and
inputInfo.all_master_devices. These devices are not part of the device list
and are only initialised for their device id, nothing else.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A passive XI2 grab always uses the paired master device as a modifier
device. After issuing a passive grab, the slave may be reattached to a
different master and hence the modifier device may change.
Rework addresses two issues:
- storing the master device's pointer is a bad idea, we need to store the ID
of the device in case it disappears during the grab.
- restoring the old master did not actually reattach the device. Fixed now.
grab->type is the device type and XI2 types overlap with core events (being
less than GenericEvent). Thus, for passive grabs the grab device would be
overwritten with whatever device was activating it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Extension devices have ActivateKeyboardGrab as their grab activation
function, hence we need to ensure the implicit passive grab flag is set
accordingly in the grab for further event delivery.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If an implicit passive grab is active, the XI event mask is in
grab->deviceMask. Otherwise, for explicit grabs, the XI event mask is in
grab->eventMask.
Reported-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With internal events, we only have one event for all the data, no need to
calculate for extra events.
Reported-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a passive enter or focus in grab activates, send additional enter or
focus events with mode XIPassiveGrabNotify to the grabbing client.
Likewise, if the grab deactivates, send additional leave or focus out
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Enter grabs are checked for in CheckMotion(), each time the sprite window
changes the current grab is deactivated (if applicable) and the new grab is
activated (if applicable). Exception - if the grab is on a parent window of
the current window since we keep the grab across descendants.
Since CheckMotion() may change the grab status of a device, we mustn't get
"dev->deviceGrab.grab" in ProcessOtherEvents until after CheckMotion().
FocusIn grabs are checked in much the same manner.
The event delivery for grabs replaces the NotifyNormal on window change with
a NotifyGrab on window change. Note that this happens before the grab
activates, so the EnterNotify(NotifyGrab) is still delivered to the window,
not to the grabbing client. This is in line with the core protocol semantics
for NotifyGrab events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's devices (e.g. some barcode readers) that have axes but no buttons.
When such a device sends a motion event, the valuator and button class is
copied into the master pointer (i.e. removing the button class).
So we need a couple of extra sanity checks for the button class to exist.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Copying all classes into the master device has drawbacks for hybrid devices
(devices that are both mice and keyboards). If such a device posts an event,
it's key classes are moved into the VCP. The key event itself is unaffected
by keyboard grabs and the like.
Partial class copying copies depending on the event and copies the classes
into the right master device (i.e. the VCK for key events, the VCP for
pointer events).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hybrid devices (keys + buttons/axes) the attached master device is
generally the wrong one. One shouldn't post a button event through a
keyboard and vice versa.
GetMaster(dev) returns the right master device for the given type needed.
This may be the MD paired with this device's MD.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ChangeDeviceId would actually overwrite the flags field if deviceid wasn't
present. Aside from the event of course not telling which device generated
it in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A device can only be attached to a single master device. So instead of
looping and searching for the master device, we can just use dev->u.master
directly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device is disabled ("off"), it must not send events to a client.
The driver shouldn't send events in that case anyway, but just to make sure
we simply drop events coming while the device is disabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A device can only be attached to a single master device. So instead of
looping and searching for the master device, we can just use dev->u.master
directly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a proper access mode, and reverse the logic of the return value.
Zero ("Success") is returned on success from the hook calls.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
Rather than have one field per hierarchy change, XI2 has two fields - one
generic one and one per-device that include the device-specific flags.
This requires some funky handling for removed devices, but oh well.
Xephyr doesn't manually set Activate/DeactivateGrab for new devices,
resulting in a NULL-pointer dereference later when a grab is activated.
Avoid the segfault by ensuring that the pointer is always valid.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xephyr doesn't manually set Activate/DeactivateGrab for new devices,
resulting in a NULL-pointer dereference later when a grab is activated.
Avoid the segfault by ensuring that the pointer is always valid.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Error: Write outside array bounds at Xext/geext.c:406
in function 'GEWindowSetMask' [Symbolic analysis]
In array dereference of cli->nextSib[extension] with index 'extension'
Array size is 128 elements (of 4 bytes each), index <= 128
Error: Buffer overflow at dix/events.c:592
in function 'SetMaskForEvent' [Symbolic analysis]
In array dereference of filters[deviceid] with index 'deviceid'
Array size is 20 elements (of 512 bytes each), index >= 0 and index <= 20
Error: Read buffer overflow at hw/xfree86/loader/loader.c:226
in function 'LoaderOpen' [Symbolic analysis]
In array dereference of refCount[new_handle] with index 'new_handle'
Array size is 256 elements (of 4 bytes each), index >= 1 and index <= 256
These bugs were found using the Parfait source code analysis tool.
For more information see http://research.sun.com/projects/parfait
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
newer gcc's warn against how this cast is done (though it eludes me why),
and lrintf() is also faster especially on insane processors like the P4
(http://www.mega-nerd.com/FPcast).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a shorthand for disabling acceleration, while retaining the
possiblity to use constant deceleration. If constant deceleration is
also unused, it will optimize motion processing.
Other possiblities to deactivate acceleration were quite hidden,
and didn't always work as expected. E.g. xset m 1 1 would retain
adaptive deceleration, while xset m 1 0 would not (in the default
profile).
Also removes the 'reserved' profile; it was unused and it's trivial
to add new ones anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
newer gcc's warn against how this cast is done (though it eludes me why),
and lrintf() is also faster especially on insane processors like the P4
(http://www.mega-nerd.com/FPcast).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A XTest virtual slave device pair (kbd/ptr) exists for every master
device pair. This is so XTest events are correctly propogated via slave
devices up to Master devices and the classes are correctly changed along
the way. We add the XTest slave device pair to the Virtual Core pointer
and provide a simple way of creating the devices.
A XTest Slave Device is identified by the XTstDevicePrivateKey property
being set in the devices devProperties
XI events are still propagated through the matching device, in the hope the
client knows what it is doing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allocating a slave device is essentially the same as allocating a master device.
Hence we rename AllocMaster to AllocDevicePair and provided the ability to
indicate if a master or slave device pair is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some keyboards (?) advertise more than MAX_VALUATORS axes. Parts of the
internal event delivery relies on not having more than MAX_VALUATOR axes, so
let's cap it down.
If there's real devices that require more than the current 36, I'm sure we can
bump this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some keyboards (?) advertise more than MAX_VALUATORS axes. Parts of the
internal event delivery relies on not having more than MAX_VALUATOR axes, so
let's cap it down.
If there's real devices that require more than the current 36, I'm sure we can
bump this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This didn't really work as intended, but did amazingly well thanks
to roundf() hiding the defect. Cheers!
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Virtually all callers use
XkbGetRulesDefault(&rmlvo);
InitKeyboardDeviceStruct(..., rmlvo);
Let's save them the trouble and accept NULL as a hint to take the
default RMLVO.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This didn't really work as intended, but did amazingly well thanks
to roundf() hiding the defect. Cheers!
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On a typical LCD, a black screensaver is actually worse for power
consumption than a normal screen, because it takes more energy to turn
the crystals opaque. Also, the intermediate DPMS states are essentially
useless and most monitors alias them to the 'off' state, so we may as
well do the same.
As a pleasant side effect, this brings the default DPMS timeouts in line
with the EnergyStar Program Requirements for Computers:
http://www.energystar.gov/index.cfm?c=revisions.computer_spec
which state that products must be "shipped with the display's Sleep mode
set to activate within 15 minutes of user inactivity".
These two defines were defined in C files but not used anywhere:
dix/window.c #define DeviceEventMasks (KeyPressMask | [...]
os/connection.c #define MAXFD 500
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yes, this means we have even more arguments to GrabDevice. But it beats having
a copy of most but not all of GrabDevice in ProcGrabPointer.
Also, reshuffle the order of parameters, the CARD* status is a return value
and should be last.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split ChangeMasterDeviceClasses into an extra XISendDeviceChangedEvent that
assembles the XI2 wire event for the DeviceChanged event. Re-use this when
detaching the last SD.
Not quite perfect yet, we still copy the device classes from the slave now
rather than from the data we had when the event occured. But it's a start.
(We can now unexport SizeDeviceInfo and CopySwapDevices, not needed anymore)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>