../hw/xwin/winmultiwindowwm.c:188:1: warning: ‘MessageName’ defined but not used [-Wunused-function]
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
../hw/xwin/winshadgdi.c: In function ‘winCloseScreenShadowGDI’:
../hw/xwin/winshadgdi.c:632:12: warning: ‘fReturn’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winshadgdi.c:579:10: note: ‘fReturn’ was declared here
../hw/xwin/winshadddnl.c: In function ‘winCloseScreenShadowDDNL’:
../hw/xwin/winshadddnl.c:711:12: warning: ‘fReturn’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winshadddnl.c:661:10: note: ‘fReturn’ was declared here
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This is possibly an actual bug in failing to check we successfully retrieved
the monitor size before using it to set the X screen size.
../hw/xwin/winwndproc.c: In function ‘winWindowProc’:
../hw/xwin/winwndproc.c:283:55: warning: ‘dwHeight’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winwndproc.c:240:32: note: ‘dwHeight’ was declared here
../hw/xwin/winwndproc.c:281:54: warning: ‘dwWidth’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winwndproc.c:240:23: note: ‘dwWidth’ was declared here
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Because we can use a shared lib in dlsym() for the symbol loader test,
but we can't use the executable.
v2: Drop a stray ' ' and rebase on 820a4cbe9f, by anholt
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
C99 isn't enough on its own to get POSIX feature sets defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Whatever problem this is trying to fix, we don't care. Just include the
thing and stop worrying about whether _POSIX_SOURCE is defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Delay removing the client from these two queues until all potential
I/O has completed in case we mark the client as ready for reading or
with pending output during the close operation.
Bugzilla: https://bugs.freedesktop.org/100957
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
gcc -std=c99 does not define the former, and it's a horrible namespace
confusion anyway.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It seems unlikely anyone still needs to build against libc4/libc5.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
I had said:
commit c42311a9d7
Author: Adam Jackson <ajax@redhat.com>
Date: Fri Mar 24 15:58:54 2017 -0400
kdrive: Remove KdOsFuncs
Only the Init slot was used, and Xephyr can just as easily do
that initialization directly.
And I'd've been right, but I forgot to make that initialization only
happen on startup (i.e. when serverGeneration == 1).
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If we're linking with libbsd anyway, we might as well use the functions
it provides instead of compiling our replacements.
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Use conf_data outside of include/ to avoid re-running detection of the
same functions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Peter Harris <pharris@opentext.com>
Set HAVE_REALLOCARRAY, HAVE_SIGACTION, HAVE_STRCASESTR, HAVE_STRLCAT,
HAVE_STRLCPY, HAVE_TIMINGSAFE_MEMCMP, and BUSFAULT.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Peter Harris <pharris@opentext.com>
Using the meson idiom of initializing a variaible to an empty array to
represent a null value does not work well for a variable expected to hold a
dependency object, as trying to apply found() to it will fail (currently).
I think this can be demonstrated by configuing with Dglamor=no, then gbm_dep
is set to [] in meson.build, and then tested with found() in
include/meson.build.
Use dependency('') to create an empty dependency.
Future work: In the autotools build GBM is required if build_xorg &
build_glamor. I suspect that it was also required for build_xwayland &
build_glamor, but that was never checked. That test seems to have gone
missing in meson.build, the required:false when checking for gbm should
possibly be dropped?
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
As in autotools build, only turn on build_dbus (build dbus-core.c) if it's
needed by build_hal or build_systemd_logind, not just because dbus is
available.
Building dbus-core.c without NEED_DBUS defined fails, as the contents of
dbus-core.h are turned off.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Acked-by: Eric Anholt <eric@anholt.net>
Add options for DRI{1,2,3}
shmfence is required for DRI3
libdrm is required for any DRI{1,2,3}
Consolidate calls to dependency('libdrm')
Set WITH_LIBDRM when building with libdrm
v2:
Initialize libxserver_dri3 to []
Manually flatten libxserver, since meson doesn't (currently)
Use version_compare rather than circumloctions with dependency()
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
This dependency is never used, and build_dga is hardwired to false later on,
anyhow.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Include dix-config.h first to pick up _GNU_SOURCE so we get the
definition for sigset_t.
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
v2: Re-commit the patch reverted in
2388f5e583, with Aaron Plattner's
fix squashed in (by anholt).
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v1)
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Eric Anholt <eric@anholt.net>
This reverts commit 112d0d7d01.
It broke Xorg for Adam, Peter, and myself, by failing hard when a
module load failed.
Signed-off-by: Eric Anholt <eric@anholt.net>
I clearly hadn't run ninja test, since fb no longer had any of the fb
symbols in it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In the event that xwayland gets launched on a wayland compositor that
doesn't yet have support for wp_tablet_manager, we end up skipping the
initialization of the lists. This is wrong, because regardless of
whether or not a tablet is present we still attempt to traverse these
lists later in xwl_set_cursor(), expecting that if the lists are empty
from no tablet manager that we simply won't execute any loop iterations.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x7f73722545bf]
(EE) 2: Xwayland (xwl_set_cursor+0x9f) [0x429974]
(EE) 3: Xwayland (miPointerUpdateSprite+0x261) [0x4fe1ca]
(EE) 4: Xwayland (mieqProcessInputEvents+0x239) [0x4f8d33]
(EE) 5: Xwayland (ProcessInputEvents+0x9) [0x4282f0]
(EE) 6: Xwayland (Dispatch+0x42) [0x43e2d4]
(EE) 7: Xwayland (dix_main+0x5c9) [0x44c6dc]
(EE) 8: Xwayland (main+0x28) [0x61c523]
(EE) 9: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x7f7371e9d401]
(EE) 10: Xwayland (_start+0x2a) [0x4208fa]
(EE) 11: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x28
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Reproduced when trying to run upstream xwayland under fedora 25's weston
package.
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Test to build xserver_poll.c was inverted compared to autoconf. Build
xserver_poll.c if poll is missing.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
While we're shipping both build systems, we'll likely have 'make dist'
generated tarballs - those tarballs should be buildable with meson to
have more exposure. List them all explicitly since the list isn't likely
to change much.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Only the Init slot was used, and Xephyr can just as easily do that
initialization directly.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glibc would like to stop declaring major()/minor() macros in
<sys/types.h> because that header gets included absolutely everywhere
and unix device major/minor is perhaps usually not what's expected. Fair
enough. If one includes <sys/sysmacros.h> as well then glibc knows we
meant it and doesn't warn, so do that if it exists.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Building xserver with meson -Db_lto=true found this! Check it:
../hw/dmx/dmx.c:66:22: warning: type of ‘XRT_WINDOW’ does not match
original declaration [-Wlto-type-mismatch]
extern unsigned long XRT_WINDOW;
^
../include/resource.h:58:18: note: type ‘RESTYPE’ should match type ‘long
unsigned int’
typedef uint32_t RESTYPE;
^
../Xext/panoramiX.c:85:9: note: ‘XRT_WINDOW’ was previously declared here
RESTYPE XRT_WINDOW;
^
../Xext/panoramiX.c:85:9: note: code may be misoptimized unless
-fno-strict-aliasing is used
I have never managed successfully to build xserver with LTO with
autotools, so, score one for meson.
Get the decl from panoramiXsrv.h, which includes panoramiX.h first anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
A common meson pattern is to use empty arrays for optional sources and
dependencies, since it generally iterates over trees of arrays looking
for values. A value of '' will actually go looking for ''.
Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
I converted Xorg when meson 0.40 came out, but fumbled my grep and
forgot that I had instances of the .extract_all_objects() workaround
in dixmods, too.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This makes sure the server will go look at the client again, notice
that the FD is no longer valid and close the client down.
Bugzilla: https://bugs.freedesktop.org/100863
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
There are three copies of the same short sequence of operations to
close down a client when a write error occurs. Create a new function,
AbortClient, which performs these operations and then call it from the
three places.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Hooked up a bit differently to the other tools. Those tools can be static for
all and be re-used. The wacom driver initializes the pad with the correct
number of buttons though and we can't do this until we have the pad done event.
If the tablet is removed and we plug a different one in, we should initialize
that correctly, so unlike the other tools the pad is properly removed and
re-initialized on plug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Each xwl_tablet_tool gets a xwl_cursor, as on wayland each of those
will get an independent cursor that can be set through
zwp_tablet_tool.set_cursor.
However, all tools (and the pointer) share conceptually the same VCP
on Xwayland, so have cursor changes trigger a xwl_cursor update on
every tool (and the pointer, again). Maybe Xwayland could keep track
of the most recent device and only update that cursor to get better
visual results, but this is simpler, and it's going to be odd
anyway...
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This struct takes away the cursor info in xwl_seat, and has
an update function so we can share the frame handling code
across several xwl_cursors.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Make sure the button events are sent after the motion events into the new
position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Translates Wayland tablet events into corresponding X11 tablet events. As
with the prior commit, these events are modeled after those created by the
xf86-input-wacom driver to maximize compatibility with existing applications.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Creates and maintains the canonical trio of X devices (stylus, eraser,
and cursor) to be shared by all connected tablets. A per-tablet trio
could be created instead, but there are very few benefits to such a
configuration since all tablets still ultimately share control of a
single master pointer.
The three X devices are modeled after those created by xf86-input-wacom
but use a generic maximum X and Y that should be large enough to
accurately represent values from even the largest currently-available
tablets.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
The wp_tablet_seat interface provides us with notifications as tablets,
tools, and pads are connected to the system. Add listener functions and
store references to the obtained devices.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
