This has to run at initial CreateWindow time, at CreateScreenResources
the root window doesn't actually exist yet.
Tested-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
v2: Fix another path spotted by keithp
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Checking the iterating variable ("slave") against null can not detect if the
xorg_list_for_each_entry finished without break being invoked - slave variable
will be always non-null. This caused segfault whenever someone tried to use
DRI_PRIME with incorrect id while having at least one render offloading slave
configured.
Restructurize the GetScreenPrime to work as expected.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xorg server could be built for and run on Synopsys DesignWare ARC cores.
These changes are required for successful building and execution of the server.
Both little-endian and big-endian flavors of ARC cores are supported.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Egbert Eich <eich@freedesktop.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch fixes some compile warnings that arise after
commit 7070ebeeba
(xfree86: add new key MatchSeat to xorg.conf sections "Device", "Screen", and "ServerLayout")
available at git repository
git://people.freedesktop.org/~whot/xserver for-keith
Signed-off-by: Keith Packard <keithp@keithp.com>
We can only request one fd per device from systemd-logind. If a fd is re-used
by the same device, releasing the fd from one device doesn't mean we can close
it. The systemd code knows when it's really released, so let it close the fd.
Test case: xorg.conf section for an input device with hotplugging enabled.
evdev detects the duplicate and closes the hotplugged device, which closes the
fd. The other instance of evdev thinks the fd is still valid so now you're
playing a double lottery. First, which client(s) will get the evdev fd?
Second, which requests will be picked up by evdev and which ones will be
picked up by the client? You'll never know, but the fun is in finding out.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
With the change in the cursor interface in
4c3932620c, we need to bump the video
driver ABI number to ensure that drivers are rebuilt to match the new
interface.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Laércio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch introduces a new key MatchSeat in xorg.conf (also applies to
any .conf file in xorg.conf.d). It will allow targeting a given
"Device", "Screen", and/or "ServerLayout" section to a particular
seat only (specified by option "-seat" in X server command line),
so that other seats won't be affected.
Without this patch, one needs to write a separate xorg.conf.custom
file and pass it to X server via "-config" option, if one wants that
these settings only apply for the right seat. However, in some cases,
this solution is undesirable or even impossible (e.g. when using GDM,
which doesn't allow X server command line customization).
Example file (/etc/X11/xorg.conf.d/seat1.conf), which would be ignored
by X server unless it was started with "-seat seat1" option:
Section "Device"
Identifier "card0"
Driver "nvidia"
Option "NoLogo" "True"
MatchSeat "seat1"
EndSection
Signed-off-by: Oleg Samarin <osamarin68@gmail.com>
Signed-off-by: Laércio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently non-seat0 X servers only probe platform bus for graphics devices,
which is OK for most KMS-compliant drivers. However, for non-KMS drivers
(like NVIDIA proprietary ones), graphics devices can't be reached
by platform bus probe, resulting in a "No devices detected" error.
This patch allows a fallback to PCI bus probe for non-seat0 X servers
in case no platform bus graphics device is found.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66851
Signed-off-by: Laércio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 7353ec7cb6 "xfree86: Switch int10
code to stdint types" uses designated initializers to setup the fields
of the X86EMU_pioFuncs.
This breaks compilation on ARM, since out{b,w,l}() are redefined using
the preprocessor and therefore cause the compiler to complain about
non-existent fields being assigned to.
It seems like the compiler.h header that contains these redefinitions
isn't actually needed in xf86x86emu.c, so the easiest "fix" is to not
include it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes:
stub.c:66:1: error: conflicting types for 'xf86int10Addr'
In file included from stub.c:14:0:
xf86int10.h:72:53: note: previous declaration of 'xf86int10Addr' was here
Signed-off-by: Rob Clark <robdclark@gmail.com>
Create load_cursor_image_check, load_cursor_argb_check,
LoadCursorImageCheck and LoadCursorARGBCheck that can return failure
and use them in preference to the old unchecked variants.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
When setting crtc->gamma_size to randr_crtc->gammaSize we should
use randr_crtc->gammaSize to allocate new gamma table in crtc.
Currently, if randr_crtc->gammaSize > crtc->gammaSize the subsequent
memcpy will overwrite memory beyond the end of gamma table.
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mark mips64 as 64bit
Use long as PORT_SIZE
Signed-off-by: YunQiang Su <wzssyqa@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Ok, that's embarassing -- I didn't even make sure Adam's patch
compiled. These are minimal fixes to make it build.
Signed-off-by: Keith Packard <keithp@keithp.com>
Somewhat shocking how much simpler this is, isn't it? We no longer need
to wrap the screen or GC or Picture, because damage does it for us,
which is doubly great since the old shadowfb code didn't wrap _enough_
things (border updates and Render glyphs, at least). The only real
difference now between this and shadow is a) shadow will let you track
arbitrary pixmaps, and b) shadow's update hook runs off the BlockHandler
whereas shadowfb is immediate.
Tested on nouveau.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Flagged by cppcheck 1.64:
[hw/dmx/config/xdmxconfig.c:306] -> [hw/dmx/config/xdmxconfig.c:323]:
(warning) Possible null pointer dereference: fs - otherwise
it is redundant to check it against null.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes Piglit test "swapbuffersmsc-return swap_interval 0".
Ensure that *swap_target gets initialized on any 'return Success' path,
even if the swap request can't be completed by the driver and the server
falls back to a simple blit. That path can also be triggered by setting
swap_interval to 0, which disables sync to vertical retrace.
We originally found this bug because for some reason SDL2 automatically
sets swap_interval to 0, when we were trying to test OML_sync_control in
an SDL2 test application. We then discovered that the above-mentioned
Piglit test has been failing for the same reason since it was
introduced.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
swap_target is an out-parameter that needs to be set to the value that
SBC will take on after this SwapBuffers request completes.
However, it was also being used as a temporary variable to hold the MSC
at which the SwapBuffers request got scheduled to occur. This confusion
makes it harder to reason about whether swap_target is being set
correctly for its out-parameter usage. (Hint: It isn't.)
For the latter use, it makes more sense to use the existing target_msc
variable, which already has the right value unless target_msc, divisor,
and remainder are all 0, in which case we can set it using swap_interval
as usual.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
I'm not sure what we'd do in this case anyways, other than fatal
error.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Make it clear that we intentionally ignore the -switchCmd return
value. This keeps GCC from emitting a warning when the server is
compiled with -D_FORTIFY_SOURCE=2.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This was added for DRM_IOCTL_SET_VERSION support, which has been around
for over ten years now. Since we require ≥2.3.0 in configure.ac this
would really only protect you if you managed to build against a modern
libdrm but run against one that's more than 7½ years old, which, doctor
it hurts when I do this.
Archaeology: http://cgit.freedesktop.org/~ajax/dri/commit/xc/programs/Xserver/GL/dri/dri.c?id=77d62efca033dced96ab7998b7c62a4e2df907d5
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Handle the unported case by issuing a build-time and run-time warning.
And add support for FreeBSD kernel based systems, by using the
VT_GETINDEX ioctl to check if the file descriptor is on a virtual
console.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not printing the program name produces very confusing messages that
might be difficult to attribute while trying to diagnose problems,
let's be explicit about who we are.
Also add a missing "/" between SUID_WRAPPER_DIR and "Xorg.bin".
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The libdrm.pc file gives us the correct include path, do not try to
hardcode it on the source, as it might vary on the installed system,
for example on Debian-based systems it's under /user/include/libdrm/.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
load_cursor_argb() may need to be able to fail and have the server fall back
to a software cursor in at least the following circumstances.
1) The hardware can only support some ARGB cursors and this does not just
depend on cursor size.
2) Virtual hardware may not wish to pass through a cursor to the host at a
particular time but may wish to accept the same cursor at another time.
This patch adds a return value to the API and makes the server do the
software fall-back on failure.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
An X11 client may need to know whether the X server virtual terminal is
currently the active one. This change adds a root window property which
provides that information. Intended interface user: the VirtualBox Guest
Additions.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Started out as an Xorg module to be used from Xorg drivers to let
Xorg run under a wayland server. The idea was to be able to reuse the
2D acceleration from the Xorg driver. Now with glamor being credible,
a better plan is to just make Xwayland its own DDX, similar to Xwin
and Xquartz. This is a much better fit, as much of the code in the
original approach had to hack around Xorg doing Xorg things like take
over the VT, probe input devices and read config files. Another big win
is that Xwayland dosn't need to be setuid root.
The Xwayland support for DRI3, Glamor and render nodes was done by
Axel Davy <axel.davy@ens.fr>, who also did a lot of work on the rebase
to the Xwayland DDX.
Contributions from:
Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Corentin Chary <corentin.chary@gmail.com>
Daniel Stone <daniel@fooishbar.org>
Kristian Høgsberg <krh@bitplanet.net>
Robert Bragg <robert@linux.intel.com>
Scott Moreau <oreaus@gmail.com>
Tiago Vignatti <tiago.vignatti@intel.com>
Giovanni Campagna <gcampagn@redhat.com>
Jonas Ådahl <jadahl@gmail.com>
Ray Strode <rstrode@redhat.com>
Trevor McCort <tjmccort@gmail.com>
Rui Matos <tiagomatos@gmail.com>
Axel Davy <axel.davy@ens.fr>
Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
This reverts commit b5a61239e2.
Not only did I screw up and introduce a warning, it turns out
glXChooseFBConfig() explicitly ignores this attribute. Thanks, GLX.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
When no logfile was specified (xf86LogFileFrom == X_DEFAULT) and we're not
running as root log to $XDG_DATA_HOME/xorg/Xorg.#.log as Xorg won't be able to
log to the default /var/log/... when it is not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather then a full path prefix, this is a preparation patch for adding
support for logging to another location when not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Include os.h for ErrorF() to fix implicit-function-declaration warnings when
configured with --enable-debug.
hw/xfree86/parser/DRI.c: In function 'xf86parseDRISection':
hw/xfree86/parser/DRI.c:87:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
hw/xfree86/parser/Extensions.c: In function 'xf86parseExtensionsSection':
hw/xfree86/parser/Extensions.c:77:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Build fbcmap_mi.c once, rather than once for each DDX, and make it part of libfb
or libwfb convenience library.
Since 84e8de1271 we don't have fbcmap.c
This is a sort of revert of 17d85387d1
v2: Remove libkdrivestubs.la from configure.ac
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The XResizeWindow call wasn't replaced by the xcb equivalent, so we
were no longer setting the initial window size, only wm size hints.
Regression from commit a2b73da "Xephyr: start converting hostx.c over to
xcb"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74849
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reported-by: Laércio de Sousa <lbsousajr@gmail.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
