All you get for standard timing descriptors is horizontal size in
multiples of 8 pixels (which means you can't say 1366) and height in
terms of aspect ratio (which means you can't say 768). You'd like to
just fuzzy-match this by walking the DMT list for sufficiently close
modes, but you can't because DMT is useless and only defines a 1360x768
mode, because it's _also_ specified in terms of character cells despite
providing pixel exact timings. Neither can you use CVT or GTF to
generate the timings, because they _also_ believe that modes have to be
a multiple of 8 pixels.
You'd also hope you could find a timing definition for this in CEA, but
you can't because CEA only defines transmission formats that actually
exist. So there's 480p, 720p, and 1080p, but no 768p. And why would
there be, after all, the encoded signal is never 768p so obviously no
one would ever make a display in that format.
So instead, make a CVT mode since that's likely to be handled well by
just about everything, smash the horizontal active down by 2, and shift
the sync pulse by 1. Underscanning the hard way.
Pass the suicide.
Otherwise drivers have to refuse interlace twice: once in the output
config, and once in ->valid_mode() to catch output and config modes.
If you can't do interlaced modes, asking nicely for it in the config
isn't going to suddenly make it work.
By making the "Unable to open config file" header a warning, it was
not appearing with the filename when a config file was specified and
not found. Now we make it an error message again, but only issue
the error if a filename was specified - if none was specified, then
we don't even issue a warning, just the "Using autoconfig" info message.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
With trying to match depths so that you didn't end up with a depth 24
fbconfig for the 32-bit composite visual, I broke the alpha bits on the depth
24 X visual, which angered other applications. But in fixing that, the
pickFBconfigs code for "minimal" also could end up breaking GLX visuals if
the same FBconfig was chosen for more than one X visual.
We have no reason to not expose as many visuals as possible, but the old
"all" mode didn't match any existing X visuals to GLX visuals, so normal
GL apps didn't work at all.
Instead, replace it with a simple combination of the two modes: Create GLX
visuals by picking unique FBconfigs with as many features as possible for
each X visual in order. Then, for all remaining FBconfigs that are
appropriate for display, add a corresponding X and GLX visual.
This gets all applications (even ones that aren't smart enough to do FBconfigs)
get all the options to get the visual configuration they want. The only
potential downside is that the composite ARGB visual is unique and gets a
nearly full-featured GLX visual (except that the root visual might have taken
the tastiest FBconfig), which means that a dumb compositing manager could
waste resources. Write compositing managers using FBconfigs instead, please.
This patch gets the shadow scanout buffer repainted on panning area changes.
It does not, however, track the mouse correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the shadow scanout buffer can be re-used, the underlying framebuffer
area must be damaged so that the scanout will be repainted. This patch
delays the addition of that damaged area until after the transform in the
crtc has been updated, otherwise the old transform would have been used and
the wrong area repainted.
Signed-off-by: Keith Packard <keithp@keithp.com>
generic.c:80: warning: ‘read_legacy_video_BIOS’ defined but not used
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86IsOptionSet is rarely the right function to use for boolean options because
it returns TRUE whenever the option is present, even if its value is "no",
"off", "0", etc.
This avoids 32-bit access which might affect other registers. The linux code
uses gcc flags to get this to happen, but this seems like more of a sure thing.
Drivers not using the new hw/xfree86/modes code would crash in DRI due to
that code trying to monitor CRTC changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
We report the EDID values in RandR, and we let people configure whatever
they like for the screen in xorg.conf. Reporting the EDID values in the core
means applications get inconsistent font sizes in the default configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
In the X log, upon module load, it prints a line similar to the following.
> (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
The attached patch removes the extra / before the module name.
Code already exists in hw/xfree86/loader/loadmod.c:InitPathList to add a
trailing slash if needed, removing the one added by sprintf is harmless.
Signed-off-by: James Cloos <cloos@jhcloos.com>
Otherwise, for example, when hacking config/*.c, it is required to
run make clean on that directory, to ensure the proper libconfig.a
will be linked in the generated Xorg binary.
Instead of always keeping two copies of the keymap, only generate the
core keymap from the XKB keymap when we really need to, and use the XKB
keymap as the canonical keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XkbInitKeyboardDeviceStruct is now the only valid keyboard
initialisation: all the details are hidden behind here. This now makes
it impossible to supply a core keymap at startup.
If dev->key is valid, dev->key->xkbInfo->desc is also valid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we can't enable a device, bail out of NewInputDeviceRequest rather than
blithely continuing. Also, be more verbose when initialization failed. Also,
be more verbose when initialization failed. Also, be more verbose when
initialization failed. Also, be more verbose when initialization failed.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There were a few spots left in the source that were using the
--with-mesa-source defined headers or the now removed $(top_srcdir)/GL
directory. These aren't needed anymore as all the necessary source for
GLX is in $(top_srcdir)/glx.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Using GL for the PKG_CHECK_MODULES identifier multiple times means only
the first call will actually be used. Later calls will be skipped due to
GL_CFLAGS and GL_LIBS already being set. This changes DRI to using a
different identifier and DMX to just reusing GL_CFLAGS.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
The previous check for AEI on left us with the possibility that AEI is forced
off in the config, but devices are added through evdev nonetheless. A keyboard
added this way can CTRL+C the server. Even when we use kbd, we can set the
mode to RAW, so it's safer alround to to so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
