A cosmetic change for automake (though we have to replicate some of
xorg-macros.m4 in manpages.am now), but meson's configure_file() wants
@-delimited strings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
When the default behaviour was changed from clone mode to horizontal
extended layout, a boolean ScrnInfoRec member preferClone was introduced
to choose the old default behaviour. Option "PreferCloneMode" allows
setting this preferClone member.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
There's really no reason to pretend to support this, apps hate it, all
we're doing is giving people a way to injure themselves. It doesn't work
anyway with any Radeon, any NVIDIA chip, or any Intel chip since i810.
Rip out all the logic for handling 24bpp pixmaps and framebuffers, and
silently ignore the old options that would ask for it.
The cirrus alpine driver has been updated to default to 16bpp, and both
it and the i810 driver can now use the 32->24 conversion code in shadow
if they want. All other drivers support 32bpp. Configurations that
explicitly request 24bpp in order to fit in VRAM will be broken now
though.
v2: Fix command line options to silently ignore 24bpp rather than fail
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Just no.
The ddxDesign chunk removes the whole para about xf86FixPciResource,
since it turns out that function doesn't exist at all anymore.
The only drivers that reference this at all are i128 and mga, and even
then only in the non-pciaccess path.
v2:
- Update commentary about i128/mga
- Don't remove the BiosBase keyword from the config parser since that
would turn a no-op into a fatal error (Aaron Plattner)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Allow OutputClass config snippets to modify the module-path.
Note that any specified ModulePaths will be pre-pended to the normal
ModulePath. The idea behind this is that any output hardware specific
modules should have preference over the normal modules.
One use-case for this is the nvidia binary driver, this allows a
config snippet like this:
Section "OutputClass"
MatchDriver "nvidia"
Modulepath "/usr/lib64/nvidia/modules"
EndSection
To get the nvidia glx specific glx module loaded, but only when the
nvidia kernel driver is loaded.
Together with the glvnd work done recently, this allows the nouveau
+ mesa and nvidia-binary userspace stacks to co-exist on the same
system without any ldconfig / xorg.conf tweaking and the xserver will
automatically do the right thing depending on which kernel driver
(nouveau or nvidia) is loaded.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Allow using:
Option "PrimaryGPU" "yes"
In an OutputClass section to override the default primary GPU device
selection which selects the GPU used as output by the firmware.
If multiple output devices match an OutputClass section with
the PrimaryGPU option set, the first one enumerated becomes the
primary GPU.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for setting options in OutputClass Sections and having these
applied to any matching output devices.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The option is misleading and using it leads to disabling both direct and
accelerated indirect GLX. In such cases the xserver GLX attempts to
match DRISW (IGLX) configs with the DRI2/3 ones (direct GLX) leading to
all sorts of fun experience.
Remove the option until we get a clear split and control over direct vs
indirect GLX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The doc text is wrong at this point, input processing isn't going to
vary based on this, so we shouldn't say it does. The only thing this
_does_ get used for is DRI1 SwapBuffers (on everything but savage), and
if you disable it you're not going to get DRI1 at all, so we really
shouldn't even mention it.
Still, leave the option wired up to the parser so we don't break any
DRI1-driver-using setup relying on it being disabled, and so we don't
complain about unused options elsewhere.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
Not all display managers make it easy (or possible) to modify the
command line flags passed to the server, so add a way to get to it from
xorg.conf.
v2: Fix the FlagOptions list to not have IGLX after the terminator (Alan
Coopersmith)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For the dri2 backend, we depend on xfree86 already, so we can walk the
options for the screen looking for a vendor string from xorg.conf. For
the swrast backend we don't have that luxury, so just say mesa. This
extension isn't really meaningful on Windows or OSX yet (since libglvnd
isn't really functional there yet), so on those platforms we don't say
anything and return BadValue for the token from QueryServerString.
v2: Use xnf* allocators when parsing options (Eric and Emil)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
InputClass sections use various MatchFoo directives to decide which device to
apply to. This usually works fine for specific snippets but has drawbacks for
snippets that apply more generally to a multitude of devices.
This patch adds a NoMatchFoo directive to negate a match, thus allowing
snippets that only apply if a given condition is not set. Specifically, this
allows for more flexible fallback driver matching, it is now possible to use a
snippet that says "assign driver foo, but only if driver bar wasn't already
assigned to it". For example:
Section "InputClass"
Identifier "libinput for tablets"
MatchIsTablet "true"
NoMatchDriver "wacom"
Driver "libinput"
EndSection
The above only assigns libinput to tablet devices if wacom isn't already
assigned to this device, making it possible to select a specific driver by
installing/uninstalling it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
These settings affect clients, not server, so belong there, next to
the information about how to set $DISPLAY.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
some X manuals use then escape sequence \/ when they want to render
a slash. That's bad because \/ is not a slash but an italic
correction, never producing any output, having no effect at all in
terminal output, and only changing spacing in a minor way in typeset
output.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This commit fixes a small mistake in Xorg.wrap.1 .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
This allows gpu devices to be specified in xorg.conf Screen sections.
Section "Device"
Driver "intel"
Identifier "intel0"
Option "AccelMethod" "uxa"
EndSection
Section "Device"
Driver "modesetting"
Identifier "usb0"
EndSection
Section "Screen"
Identifier "screen"
Device "intel0"
GPUDevice "usb0"
EndSection
This should allow for easier tweaking of driver options which
currently mess up the GPU device discovery process.
v2: add error handling for more than 4 devices, (Emil)
fixup CONF_ defines to consistency
add MAX_GPUDEVICES define
(yes there is two defines, this is consistent
with everywhere else).
remove braces around slp (Mark Kettenis)
man page fixups (Aaron)
v2.1: fixup whitespace (Aaron)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the suid wrapper is enabled, /usr/bin/Xorg is just a shell script that
execs either /usr/libexec/Xorg.bin directly or the Xorg.wrap binary which then
execve's /usr/libexec/Xorg.bin.
Either way, we end up with Xorg.bin, which is problematic for two reasons:
* ps shows the command as Xorg.bin
* _COMM and _EXE in systemd's journal will both show Xorg.bin as well
There's not much we can do about the path, but having the actual command stay
as Xorg means better compatibility to existing scripts. And, the reason for
this path: the command
journalctl _COMM=Xorg
works universally, regardless of whether the wrapper is used or not.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
No modern driver pays attention to this. Presumably there existed
hardware once where you couldn't just read the right values out of the
CRTC.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
pciaccess does this for us, and none of our internal hooks really
remain. This does remove a cleanup pass from the BSD code, but the case
it's covering (a previous server leaving MTRRs around) can't happen
anymore.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
I forgot that the old behavior of searching in /usr/share/X11/xorg.conf.d was
documented in the man page.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Fixes: acc0b5edd1 ("xfree86: Only support one sysconfigdir")
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The OutputClass section provides a way to match output devices to a set
of given attributes and configure them. For now, only matching by kernel
driver name is supported. This can be used to determine what DDX module
to load for non-PCI output devices. DDX modules can ship an xorg.conf.d
snippet (e.g. in /usr/share/X11/xorg.conf.d) that looks like this:
Section "OutputClass"
Identifer "NVIDIA Tegra open-source driver"
MatchDriver "tegra"
Driver "opentegra"
EndSection
This will cause any device that's driven by the kernel driver named
"tegra" to use the "opentegra" DDX module.
See the OUTPUTCLASS section in xorg.conf(5) for more details.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Tested-By: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Laércio de Sousa <lbsousajr@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When no logfile was specified (xf86LogFileFrom == X_DEFAULT) and we're not
running as root log to $XDG_DATA_HOME/xorg/Xorg.#.log as Xorg won't be able to
log to the default /var/log/... when it is not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the recent systemd-logind changes it is possible to install the Xorg
binary without suid root rights and still have everything working as it
should *if* the user only has cards which are supported by kms.
This commit adds a little suid root wrapper, which is a bit weird, first we
strip the suid-root bit of the Xorg binary, and then we add a wrapper ?
The function of this wrapper is to see if a system still needs root-rights,
if it does not (it supports kms and the kms drivers are properly loaded),
then it will immediately drop all elevated rights before executing the real
Xorg binary. If it finds (some) cards which don't support kms, or no cards
at all, then it will execute the Xorg server with elevated rights so that
ie the nvidia binary driver and the vesa driver can keep working normally.
To make it possible for security concious users who don't need the root
rights to completely remove the wrapper, Xorg is started in a 3 step process
when the wrapper is enabled during build time:
1) A simple shell script which checks if the wrapper is there, if it is
it executes the wrapper, if not it directly executes the real Xorg binary
2) The wrapper gets executed, does its checks, normally drops all elevated
rights and then executes the real Xorg binary
3) The real Xorg binary does its thing
This allows distributions to put the wrapper binary in a separate package, and
will allow users to remove this package. IE the plan with Fedora is to make
"legacy" drivers depend on the wrapper pkg, and since our default install
contains some legacy drivers it will be part of the default install, but
users can later yum remove it (which will also automatically remove the
legacy driver packages as those won't work without it anyways).
The wrapper is loosely modelled after the existing Debian Xwrapper, it
uses the same config-file + config-file format, and also allows restricting
Xserver execution (through the wrapper) to console users only.
There also is a new needs_root_rights config file directive, which can
be used to override the auto-detection the wrapper does.
Hopefully this will allow Debian to replace their own wrapper with this
upstream one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This at least mentions AutoAddGPU and hints at when you might
want to disable it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A constant deceleration of x simply means (delta * 1/x). We limited that to
values >= 1.0f for obvious reasons, but can also allow values from 0-1.
That means that ConstantDeceleration is actually a ConstantAcceleration, but
hey, if someone needs it...
X.Org Bug 66134 <http://bugs.freedesktop.org/show_bug.cgi?id=66134>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Section "Monitor"
Identifier "a21inch"
Option "PreferredMode" "1600x1200"
Option "ZoomModes" "1600x1200 1280x1024 1280x1024 640x480"
EndSection
The option's effect is to search for and mark once each named mode in
the output modes list. So the specification order is free and the zoom
modes sequence follows the order of the output modes list. All marked
modes are available via the Ctrl+Alt+Keypad-{Plus,Minus} key
combination.
See also http://bugs.freedesktop.org/show_bug.cgi?id=17954.
This option has its use for combined monitor and television setups.
It allows for easy switching between 60 Hz and 50 Hz modes even when a
monitor refuses to display the input signal.
(Includes a few minor changes suggested by Aaron for v2)
Signed-off-by: Servaas Vandenberghe <vdb@picaros.org>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
man xorg.conf states that the 'Device' identifier is required in the
'Screen' section, yet current xserver defaults properly and boots up
fine without it.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=20742
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Cygwin libraries use the .dll extension and "cyg" prefix in place of "lib".
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Excerpt from http://lists.x.org/archives/xorg-devel/2011-March/020481.html:
The Xorg & xorg.conf substitutions are leftover from the transitional
period where some distros were building our sources with the XFree86
and XF86config names until they had time to adjust the rest of their
packages/installer/config code to the new names.
This will fix inconsistencies and prevent the creation of new unneeded
sed patterns.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Excerpt from http://lists.x.org/archives/xorg-devel/2011-March/020481.html:
The Xorg & xorg.conf substitutions are leftover from the transitional
period where some distros were building our sources with the XFree86
and XF86config names until they had time to adjust the rest of their
packages/installer/config code to the new names.
This will fix inconsistencies and prevent the creation of new unneeded
sed patterns.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Debian's QA tool “lintian” reported a bad whatis entry for the
xorg.conf(.d) manpages.
It comes with the following pointers:
For manual pages that document multiple programs, functions, files, or
other things, the part before "\-" should list each separated by a
comma and a space. […]
Refer to the lexgrog(1) manual page, the groff_man(7) manual page, and
the groff_mdoc(7) manual page for details.
Indeed, the current situation is:
$ whatis xorg.conf; whatis xorg.conf.d
xorg.conf (5) - (unknown subject)
xorg.conf.d (5) - (unknown subject)
With this patch:
xorg.conf (5) - configuration files for Xorg X server
xorg.conf.d (5) - configuration files for Xorg X server
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
The xorg.conf manual uses the following convention in most of its
sections:
bold = text to be copied literally to the config file,
italic = a symbolic name to be substituted by a true value.
Some configuration keywords seem to have been changed into generic
options. Prepending Option to the manual entry swapped the
bold-italic logic. This patch restores the convention in the monitor
section and consists of
-.BI "Option " "\*qPreferredMode\*q " \*qstring\*q
+.BI "Option \*qPreferredMode\*q \*q" name \*q
modifications.
Plus a few minor changes (Modes → Mode) and a typo fix.
Signed-off-by: Servaas Vandenberghe
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Recent changes to the server change the default absolute input device
behaviour on zaphods to span the whole desktop too. Since these setups
usually use an xorg.conf, allow the transformation matrix to be specified in
the config as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>